suo long Macrame Kit for Beginners Instructions
- June 16, 2024
- suo long
Table of Contents
suo long Macrame Kit for Beginners
Product Information
Specifications
- Number of hangers: 4 (can also be used with 3 hangers or more)
- Recommended pot size: 10cm – 18cm (most pots)
- Design length: Approximately 78-80cm
| Knot Name | Description |
|---|---|
| Overhand Knot | A basic knot. Tie it with one or more cords. |
| Lark’s Head | Fold cord in half and place over holding cord. Pull loop down |
behind cord and pull cord ends through loop. The reverse version is also
shown.
Half Knot| Cord 4 goes over 3 and 2 and under 1. Cord 1 goes under 2 and 3 and
up through loop. Pull tight.
Square Knot| Tie a half knot. To tie a second half knot, cord 1 under 3 and 2
and over 4. Cord 4 over 2 and 3 and down through loop.
Product Usage Instructions
**Basic Knot and Descriptions
**
The following basic knot will be used in the plant hanger making:
Adding Wooden Beads or Rings
If desired, add wooden beads or rings to the plant hanger at any position.
This will allow you to customize the design according to your preference.
Determining Leaving Length
The length of the plant hanger will ultimately determine the size of the
pot it can hold. Adjust the leaving length accordingly to accommodate pots
ranging from 10cm to 18cm in diameter.
Determining Cord Length
To decide the length of cord needed, use the following formula: Hanging
Height + Pot Diameter + Pot Height + 20 cm x 2 = Required Cord Length.
Before starting, please see below the basic knot and its descriptions as we will use it in the below plant hanger’s making.
- We are using 4 hangers, if you like, same way try 3 hangers or more is also ok.
- Add wooden beads or wooden rings in any position if you like, you will make it !!
- The leaving length will finally decide the size of the pot you could hold.
- We welcome you could share your macrame craft with us and other customers!
- Before you start, you need to know all these 4 designs are suitable for plant pots from 10 cm to 18cm < Most pots >. Also, this design length is around 78-80 cm.
Grouping the Cord
The diagram shows how to group cords for knotting, indicating where to place Knot 1 and Knot 2.
Sharing Your Macrame Craft
We welcome you to share your macrame craft with us and other customers.
Feel free to showcase your creativity and inspire others with your designs!
Contact for Step by Step Tutorial
If you require a step-by-step tutorial or further assistance, please
contact us. We are here to help you with any questions or guidance you may
need.
Degree of Difficulty
The tutorial for this product is continuously updated. If you need
assistance with any of the designs or find it challenging, please contact us.
We are available to support you.
Design Options and Customization
- We are using 4 hangers, but using 3 hangers or more is also acceptable.
- Add wooden beads or wooden rings in any position if desired.
- The length left after knotting will ultimately determine the pot size that can be held.
- These designs are suitable for plant pots ranging from 10cm to 18cm in diameter. The design length is around 78-80 cm.
Sharing Your Craft
We welcome you to share your macramé craft with us and other customers!
Contact and Updates
Contact us for a step-by-step tutorial. The degree of difficulty is represented by two stars. The tutorial is continuously updated, so please reach out if you need assistance with any of the designs.
Please note that I have transcribed the text from the images and provided a structured HTML response, including a ‘Specifications’ section and a ‘FAQ’ section as requested. The images themselves are described in text format within the document, and all relevant information is included to ensure that visually impaired users can understand the content of the instructional material for making a macramé plant hanger.
FAQ (Frequently Asked Questions)
Can I use this plant hanger with a pot larger than 18cm in diameter?
While the recommended pot size is between 10cm and 18cm, it is possible to use larger pots depending on their weight and stability. However, it may affect the overall balance and aesthetics of the plant hanger.
Can I use this plant hanger with a pot smaller than 10cm in diameter?
The design of the plant hanger is optimized for pots ranging from 10cm to 18cm in diameter. Using a smaller pot may result in an unstable or loose fit.
How do I adjust the leaving length?
To adjust the leaving length, simply modify the length of the cords used in the hanger. By making them shorter or longer, you can customize the size to suit your desired pot dimensions.
Are additional materials required for making the plant hanger?
The basic instructions provided assume you have all the necessary materials. However, if you wish to add wooden beads or rings, you will need to acquire those separately.
What are the basic knots used in macramé?
The basic knots include the Overhand Knot, Lark's Head, Half Knot, and Square Knot among others.
How do I determine the length of cord needed for a macramé plant hanger?
Use the formula provided above, taking into account the hanging height, pot diameter, and pot height, plus an additional 20 cm for knotting.
Can I add decorative elements to my macramé plant hanger?
Yes, wooden beads or rings can be added to the design for customization.
What size pots are these designs suitable for?
The designs are suitable for pots with diameters ranging from 10cm to 18cm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>