threesheep S5-4 Fitness Tracker for Men and Women Instruction Manual
- June 16, 2024
- Threesheep
Table of Contents
S5-4 Fitness Tracker for Men and Women
Thanks for purchasing this product.
Please read this Manual carefuly before use
Scanthe QR code for more. function information
https://www.runmefit.cn/client/watchs/content/version/S5-4/lang/1
Use introduction
-
Product overview
-
Touch Instructions * Click to toggle function.
Long press to enter the sub interface.
Short press to turn on the screen when the screen is off.
Long press for 3 seconds to turn on. -
Charging instructions
As shown in the picture, remove one side of the strap and plug the end with the USB interface into the USB port of the power supply to charge; charge for 5 minutes or press and hold the touch point for 3 seconds to activate the device.
APP download and connection
-
APP download
Please download and install the “Runmefit” application in AppStore, Google Play or scan the QR code on the right to download.
https://www.runmefit.cn/client/download -
Pairing
Please turn on the Bluetooth of the mobile phone before pairing, and then you must perform the Bluetooth pairing in the APP, and the Bluetooth pairing cannot be performed in the mobile phone system.
- Click “Add Device” on the “Devices” interface of the APP, and the Bluetooth search interface will pop up. Next, find the corresponding Bluetooth name to pairing.
Function introduction
This device has a wide range of functions, mainly including:
- Health-related functions: One-tap measurement, heart rate detection, blood oxygen saturation, blood pressure detection, temperature detection, blood glucose detection, MAI health score, sleep monitoring, water drinking reminder, sedentary reminder, etc;
- Sports-related functions: 16 sports modes, today’s activity, etc;
- Other functions: Message reminders, stopwatch, alarm clock, low battery reminders, call reminders, goal achievement, etc.
Precautions
- The waterproof level of this product is IP68, and can only use it for daily waterproof protection, such as washing hands, raining, Etc.;
- Do not take it for swimming, diving, surfing, and other water sports;
- Do not use it in high-temperature places such as saunas and steam rooms. The high-temperature environment will significantly increase the probability of water entering the watch;
- This product is not a medical device. Therefore, all the measured data and results are for reference only and not for medical evidence.
FAQ
1. Can not search the Bluetooth of the device in the APP,
It is possible that when you connected the device, you linked directly to the Bluetooth of the mobile phone system. Therefore, the connected device needs to be connected to the APP and not join in the phone settings. If the Bluetooth has bound in the phone settings, please unbind in the phone settings first, and then enter the APP to search for Bluetooth to bound. Note: A Bluetooth pairing request will pop up when the watch has connected to the |OS system. You need to click Allow pairing to connect the device normally.
2. The APP can't synchronize the data of the smartwatch.
The Bluetooth wireless connection may have signal interference and other reasons, which may cause the tink or data synchronization time to be too long. In addition, the Bluetooth of some mobile phones may occasionally be abnormal when starting up. Therefore, it is better to restart the phone’s Bluetooth before pairing.
3. The watch cannot be charged.
Please make sure that the positive and negative poles of the charging port are not reversed and that the charger is powered on; when the battery of the watch is too low, there will be a period of battery pre-charging time.
4. The time of the watch is not accurate.
When the device is fully charged after a dead battery or has not been used for a long time, there may be errors in the time. However, as long as the APP is connected, the time will be automatically synchronized.
5. Heart rate detection will fail or be inaccurate.
These conditions may be caused by non-standard wearing methods, such as light leakage due to incomplete fit to the skin, movement of the watch on the skin, wearing the watch too tightly, raising the arm, and making a fist that affects the blood circulation, Etc. These conditions may affect the heart rate measurement. The correct measurement method requires laying your arms flat, relaxing your body, and keeping it still while ensuring that the watch is close to your wrist.
6. The number of steps recorded by the watch is inaccurate or wrong.
The foltowing conditions may cause it: The arm swing amplitude, frequency, and law of the arm swing will have a particular impact on the step count. In addition, the accuracy of the watch's step count is related to the walking posture, walking habits, walking speed, walking continuity, and road conditions. + Please fill in various information correctly in the APP and synchronize it to the watch, including gender, height, weight, age, all of which will affect the step counting algorithm. In daily life, we often shake our arms or bodies. In some scenes, the shaking is regular, and the watch will misjudge it as walking. Ifonly a few steps are taken when counting steps and the movement is not continuous, the watch may not record. The watch does not have a GPS positioning function, so there will be a specific error in step counting in sports mode.
For more questions (for example, no message reminder), please check “My”-“FAQ” in the APP.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment. This
equipment has been tested and found to comply with the timits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>