RFCD-5400 Rechargeable Waterproof Hairscape Trimmer User Manual

**RFCD-5400 Rechargeable Waterproof Hairscape Trimmer User Manual

**

Introduction

Technical Highlights

• Special head in R-shaped corner, no scratches on skins.
• With 2 guide combs, easy to cut hair of 4 lengths.
• As per power and environment, select charging use or plug-in use.
• Global universal voltaqe, 5V / DC USB port input with short-circuit protection.
• Detachable cutter heads, easy to wipe off scrappy hair.
• Precise LCD display shows percentage of remaining power, oil filling reminder and charging reminder. When it is fully charged, the number stop blinking and shows 99.

Technical Specifications

LCD Digital Display
Built-in rechargeable 600mA Li-Ion battery
Charging Time: 3-4 hours
Running Time: 100-120 minutes
Accessories: USB Charging Cable, Lubricating Oil, Cleaning Brush, Charging Base, Limit comb.

Accessories

Accessories view

• 3mm&4mm guide com

• 5mm&6mm guide combs

• Charging Bas

• USB Cable

• Cleaning Brush

• Oil Bottle

Using Method

On/off

Press the button to turn on the device. The number on the display indicating that the remaining power is gradually disappearing.

The refueling prompt is white for about 10 seconds.

Press the button a second time and the device will shut down.

Switch On Reminder

• When the device is switched on, the display would turn on and shows the remaining power.

Plug-in use/charging use

Plug USB 2-hole head in clipper body

After making sure that the clippers are turned off, plug the USB adapter into the power socket and clipper’s body indicator lamp will turn on.
(The USB plug can be plugged into any USB socket on the wall such as cell phone chargers, computers, laptops and portable power banks)

Warm Reminder: After purchasing this product, please fully charge it before first use.
If it has not been used for a long time, please charge it every 3 months

With and Without Guide Combs

Guide Comb View

• 3mm&4mm guide combs

• 5mm&6mm guide co

• Premium Non-Slip Charging Dock

• Through guide combs, cut hair lengths of 3mm/4mm/5mm and 6mm.

• Charge the device using the Charging Dock or directly with the cable.

How To Put On/Take Off The Comb

Put-On Method

Face the comb towards the cutter head’s slot. When putting the comb on, make sure it is fixed onto the latches on the side of device (as shown in the graphic).

Take-Off Method

Drag open one side of the guide comb using your fingers. Avoid pulling the comb too hard as to prevent it from being damaged.

Notes

• The guide comb allows for the adjustment to the desired hair length, not hair thickness.

Cutter Heads

Cutter head features

Cutter head installation

1. Put part A into slot B
   

2. Once the parts are aligned, press the cutter head back until you hear a “click
   

Taking the cutter head on and off

Turn off the device, press the cutter teeth using your thumbs and push forward in the direction of the arrows.

During the process of taking off the cutter heads, use one hand to push forward while using the other hand for support as to prevent the cutter head from falling down.

Kind Attentions

• White ceramic blades are very fragile and prone to damage when being put on or off. Please be careful with this.
• When ceramic blades are broken, they will start clumping hair and stop running smoothly.
• Please replace cutter heads every 60 days for peak performance.
• Sterilize blades regularly and make sure they are hygienic prior to cutting hair.

Cutter Head Cleaning and Maintenance

Cutter heads cleaning

Clean off hair scraps with the cleaning brush.

Kind Attentions

• Caution: Never take off spring on the cutter head. Doing otherwise may prevent the spring from reverting to its original state.
• Please take off cutter blades after use. Clean off scrappy hair on the cutter head surface and in between blades as to maintain sharpness.
• Clean cutter head with water and thoroughly dry it a

Cutter head lubrication

Drop oil onto the area where the upper and bottom blades move back and forth. Place a couple drops in the 5 designated areas.

After dropping oil, press on the cutter frames and move them back and forth, lubricating the blades evenly.

Kind Attentions

• Blade lifetime has something to do with running frequency, hair quality and maintenance.
• Replace worn cutter heads to avoid hair clamping. For any replacement part, kindly consult ouragencies and repair service centers. Never fit oter maker cutter heads on our clippers.
• During using the clipper, you know the cutter head may get a little warm. It’s quite normal and it doesnt influence proper

Trimmer Body Cleaning and Maintenance

Body cleaning

Wipe off cutter hair scraps in the cutter head slot.

You can also wash the clipper’s body with water.

Clean the body and make sure the body is wiped dry before fitting the cutter heads back on.

Prohibited Matters

Don’ t wipe clipper body with gasoline, alcohol, thinner and other corrosive chemical agents.

Otherwise, its out shell will change colour. Hereby suggest cleaning off the dirty mark of clipper surface with weak alkaline soap water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>