JELLYPIG TZ-926 Dog Shock Collar with Remote User Manual

JELLYPIG TZ-926 Dog Shock Collar with Remote

Packaging List

Product Specifications

2.5 Hours

Transmitter/ Receiver Standby Time:| 180 Days
Transmitter Waterproof Rating:| Not Waterproof
Receiver Waterproof Rating:| IPX7 Waterproof
Working temperature:| -30°C- +70°C
Storage temperature:| -30°C- +85°C
Relative Humidity:| 20%－90%

Main Features

• Beep, Vibration, Shock training mode
• 1-9 adjustable beep sound levels 1-16 adjustable Vibration/Shock levels
• With safe LED light for locating your dog at night
• Remote control range up to 800M(2600FT)
• Dual battery power display
• The receiver is IPX7 waterproof; the Transmitter is not waterproof
• Security lock function
• One Transmitter can control up to 3 Receivers
• Receiver and transmitter with Power Saving Mode

Important Statement

WARNING!

• DO NOT use this product for aggressive dogs or vicious animals.
• When the receiving collar is turned on, the human body should not directly touch the Shock contact points of the collar.
• Risk of skin damage. It’s important to fit the collar properly. A collar that is fitted too tightly or worn for too long may harm your dog’s skin. This condition, which ranges from redness to pressure ulcers, is commonly known as bed sores.

CAUTIONS

• Do not let your dog wear the collar for more than 12 hours per 24-hour period.
• If possible, gently reposition the collar on your dog’s neck every 1 or 2 hours.
• Never attach a leash to the Receiver Collar, as this would cause excessive pressure on the contact points.
• When using a separate collar to connect a leash, please ensure that it does not put excessive pressure on the electronic collar.
• Examine your dog’s neck daily for signs of chafing or soreness.
• If a rash or sore is found, stop using the collar till the injured skin has been healed.
• If the condition persists for more than 48 hours, consult your veterinarian.
• If possible. please use the Beep Mode or Vibration Mode at first. then can try the Static shock function.

To extend the battery life of this product, if you do not intend to use it for a long time please charge them per month.

Transmitter Introduction

Receiver Introduction

LED Light Mode

| light off→red light steady on→red light flashing→green light steady on→green light flashing→blue light steady on→ blue light flashing

Charging Instructions

Please charge the product before use or when the transmitter and receiver battery icons flash on the screen! It takes 2.5 hours to fully charge the transmitter and receiving collar.

1. When the transmitter is charging, three bars of the battery icon ( ) are running circularly. The battery icon ( ) remains on when the battery is fully charged.
2. When the receiver is charging, the red LED indicator light is on. When the battery is fully charged, the green LED indicator light is on.

Low Battery Indicator

• Transmitter: the transmitter battery icon ( ) is flashing for 30 seconds, then the transmitter will be turned off automatically.
• Receiver: the receiver battery icon ( ) will disappear after the receiver battery icon flashes for 30s, and the indicator red light flashes for 30s, then the receiver will be turned off automatically.

Operation Instructions

Turn on/off the transmitter and receiver

• Turn on the transmitter: push down the key lock switch, and the screen will light up, indicating that the transmitter is working.
• Lock the transmitter: push up the key lock switch, and the lock key icon flashes, which means entering key lock mode.

• Turn on the receiver: press the ON/OFF button, and the green LED indicator light will be on and then flash intermittently, indicating it is turned on.
• Turn off the receiver: In the power-on state, press the ON/OFF button, and the red LED indicator light will be on and off, indicating it is off.

Operate beep function

• Short Press the ( ) button to launch the beep signal, the ( ) is displayed on the screen, the Mode Indicator will light up Green once and the receiving collar will beep once after receiving the signal. Long press the ( ) button, the Green light will remain on and the receiving collar will continuously beep.
• Press the button for more than 8s, the number icon and beep icon will flash, and the receiver will automatically stop working to protect your dog and resume work after 30 seconds.
• Adjust beep loudness: press the ( ) button to adjust beep loudness from 1-9 levels.

Operate Vibration Function

• Short press the ( ) button to launch the vibration signal, and the ( ) is displayed on the screen, the Mode Indicator will light up Blue once and the receiving collar will vibrate once after receiving the signal. Long press the ( ) button, the Blue light will remain on and the receiving collar continuously vibrate.
• Press the button for more than 8s, the number icon and vibration icon will flash, and the receiver will automatically stop working to protect your dog and resume work after 30.
• Adjust vibration intensity: press the ( ) button to adjust vibration intensity from 1-16 levels.

Operate Shock Function

• Short press the ( ) button to launch the shock signal, and the ( ) is displayed on the screen, the Mode Indicator will light up Red once and the receiving collar will generate a static impulse once after receiving the signal. Long press the ( ) button, the Red light will remain on and the receiving collar will continuously generate static impulse.
• Press the button for more than 8s, and the number icon and shock icon will flash, the receiver will automatically stop working to protect your dog and resume work after 30.
• Adjust shock intensity: press the ( ) button to adjust vibration intensity from 1-16 levels.

Operate LED Light Function

• Short Press the ( ) button to turn on LED light mode for locating your dog at night, and the ( ) is displayed on the screen.
• After the LED light mode is turned on, short press the ( ) button, LED Mode Indicator will cycle through the following light modes:
  1st press: Mode 0, light off
  2nd press: Mode 1, red light steady on
  3rd press: Mode 2, red light flashing
  4th press: Mode 3, green light steady on
  5th press: Mode 4, green light flashing
  6th press: Mode 5, blue light steady on
  7th press: Mode 6, blue light flashing

Use the test light tool
The static impulse generated by the Receiving Collar cannot be seen by the naked eye. To test whether the Static Shock Function works, we need to use the test light tool.

• Put the test light on contact points on the receiving collar.
• Press the ( ) button on the transmitter, the test light will flash, indicating the shock function is working normally.

Channel switching
Our product supports a remote transmitter connected to 3 receivers and can train 3 dogs at the same time. Press the ( ) to switch between CH1, CH2, and CH3.

Receiver Fitting Instructions

Please ensure that the receiving collar is fitted correctly.

1. Center the Contact Points under your dog’s neck(A).
2. Please adjust the sliders to have the receiving collar positioned snugly around your dog’s neck. Make sure that you can leave one finger between the strap and your dog’s neck(B).
3. Choose the correct Contact Points to suit the length of your dog’s hair.
   If your dog has long hair, use the longer Contact Points. Use Mini Spanner to screw/unscrew Contact Points. Remember to install the matching silicone caps to protect your dog’s skin.

Pairing Instructions

In the 1-receiving collar package, the receiver and transmitter are already factory-paired on CH1 by default. If you need to connect the CH2/CH3 receiver, pls follow the steps below to pair with the transmitter. If not, you can skip this step.

1. Press the ( ) button to choose CH2 or CH3.
2. In the power-on state, hold the ON/OFF button till Red and Green LED light flashes alternately, which means it goes into pairing mode.
3. Press the ( ) button, If green LED light will flash intermittently, indicating that the pairing is successful.
4. If you enter the pairing mode and do not press the buttons within 10mins, the Red and Green LED lights will change from flashing to off, and then the Green LED light flash intermittently, it will exit pairing mode, and you need to follow step 3 to re-pair.

How Does the Training Collar Work

The Remote Training Collar has been proven to be a safe, comfortable, and effective training system for all dogs weighing over 15 lbs. This system allows you to control your dog within a range of up to 2600 feet. At the press of a button, the Remote Transmitter sends a signal to the Receiving Collar and activates a Beep, a Vibration, or a Static Shock correction output. By using the Training Collar properly, you can correct much of your dog’s undesired behavior and teach basic and advanced obedience commands.
Important: The Remote Training Collar has an effective range of up to 2600 feet. Hold the Remote Transmitter horizontally away from your body to achieve the optimum range. Terrain features, weather, vegetation, transmission from other radio devices, and other factors may affect the range of the Remote Transmitter.

Frequently Asked Questions

• Q1: Why don’t the receiver and transmitter work?
• A: One reason may be the transmitter and receiver are not turned on, please refer to the manual for the power-on operation. the other reason maybe that the transmitter and receiver batteries are exhausted, please fully charge them.
• Q2: Once my dog is trained and has learned to obey my commands, will he have to continue wearing the Receiving Collar?
• A: Probably not, although you may need to reinforce the training with the Receiving Collar from time to time.
• Q3: Is the Receiving Collar waterproof?
• A: Yes. Your dog can swim while wearing the Receiving Collar Must seal well the charging port tightly, and keep it dry after getting wet.
• Q4: What is the lifespan of the lithium batteries?
• A: The Lithium battery in the Remote Transmitter and the Receiving Collar can be charged 400 times.
• Q5: How long should the training session for my dog be?
• A: The training sessions should be kept short for maximum effectiveness. It’s advised not to train your dog for more than 10-15mins at a time.
• Q6: Can I charge this product with any type of charger?
• A: No, we recommend using a matching charging adapter or charging adapter rated at 5V/500-1000mA because a charging adapter rated at 9V or 12V may damage to your device.

Troubleshooting

I have fitted the Rechargeable and Waterproof Training Collar correctly, but my dog is not responding.

• Ensure that the batteries are fully charged. You need to charge both the Remote Transmitter and the Receiving Collar for about 2.5 hours before they can be used for the first time.
• Check the receiving collar is turned on. Restart the Receiving collar by pressing the On/ Off button.
• Check the Remote Transmitter can adjust the intensity level of the vibration or static shock to a higher level than level 1.
• Test the 3 functions (Beep, Vibration, and Static Shock) before using the Receiving Collar for the first time. Please refer to page 9 for instructions on how to do this.
• The Receiving collar will go into Standby Mode if it is idle for more than 5 minutes. Any movements will re-activate it.
• Make sure that the Contact Points are touching your dog’s skin.
• Trim your dog’s fur where the Contact Points touch the neck. Ensure that you are using the correct set of Contact Points suitable for the length of your dog’s fur.
• Verify the receiving collar has been paired.
• If none of the above works, Pair the Remote Transmitter and the Receiving Collar again. Refer to pairing instructions to repair.

The Remote Transmitter does not work

• You must charge the Remote Transmitter before you use it for the first time. Charging time is typically 2.5 hours.
• Ensure that the Remote Transmitter has adequate power.
• Check the Remote Transmitter is turned on.
• The Remote Transmitter will automatically go into Standby Mode if it is idle for 3 minutes. No LED light will be illuminated at this time. Press any button to re-activate the Transmitter.

I am trying to test the Receiving Collar manually, but it does not work

• If you want to test the Receiving Collar manually on your hand or leg. please touch the 2 Contact Points simultaneously. Touching only one of the Contact Points will not work.

The Receiving Collar is broken. It has not worked since I dropped it

• The Receiving Collar is not designed to be drop-proof. Please do not drop the Receiving Collar, as this will damage the interior circuits.

Training Tips

Here are some general tips for training your dog:

• Eliminate one behavioral problem or teach one command at a time. If you move too fast with the training, your dog may become confused. Be consistent.
• Give your dog a single Beep, Vibration, or Static Shock for each misbehavior.
• Do not over-correct your dog. Use as little stimulation as possible during training.
• Unless you can supervise him/ her, it is recommended that you restrain your dog from environments in which he/ she has a history of misbehaving.
• However, setting up a training session in this case can dramatically improve your chances of success.
• If your dog reacts to the training by hiding or acting fearfully, redirect his/her attention to a simple and appropriate behavior, such as the”Sit!” command.

Common Weights for Different Size Dogs

Common Sizes for Different Breeds of Dogs

Large

| 10.6-12.2| 16.2-18.5| 12.2| Miniature,Schnauzer, Pekingese
11.8-13.4| 18.1-20.8| 13.8| Schnauzer, English Cocker, Spaniel
13-14.5| 20.5-23.2| 15.7| Beagle

Huge

| 17-18.9| 30-33| 23.6| Husky
18.5-20.5| 34.6-38.2| 25.6| Labrador, Retriever
21.6-24.4| 36.2-39.3| 27.5| Golden Retrieve, Old English Sheepdog

Warranty

1-Year Warranty
The original purchaser for this unit is provided with a 1-YEAR Warranty. The warranty begins on the date of purchase. For the first year, coverage is provided for both parts and labor on warranty repair services. After the first year, the Limited Lifetime Warranty covers parts only and does not cover labor fees and Accessories. Accessories such as straps and batteries are covered for the first year only. All shipping fees incurred, the cost of accessories after the first year, and labor fees associated with out-of-warranty repair work are the customers’ responsibility.

Not Covered Under Warranty
We DO NOT offer a warranty for products that have been bought secondhand or were resold. Issues of replacement and refunds on units purchased in less than 30 days from an authorized dealer must be addressed to the dealer directly. If the products purchased from an authorized dealer are 30 days after the date from the date of purchase, please send the units to us for service and repair. We DO NOT cover the cost of repairs and replacements due to misuse by the owner or dog, improper maintenance, and/or lost units. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work.

Procedure for Repair Work
If the unit is malfunctioning, please refer to the “Troubleshooting” in the manual before sending it back for service. A copy of the sales receipt showing the purchase date may be required before warranty work is initiated. Please include a brief explanation outlining the problem, and include your name, address, city/state/zip code, daytime phone number, evening phone number, and email address.

FCC STATEMENT

Compliance FCC – USA

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Modifications or changes to this equipment not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CONTACT

• Shenzhen Xiaosi Technology Co., LTD
• service@jellypigpet.com.
• Rm 513-515, BLDG B, Wepark, Rd 1Pinghu Str. ,
• Longgang District.Shenzhen, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>