2023 Sterling Silver Adjustable Ayana Chain Ring Instructions
- June 16, 2024
- Ayana
Table of Contents
2023 Sterling Silver Adjustable Ayana Chain Ring Instructions
BEFORE PRINTING
- PLEASE PRINT THIS AT 100% SCALE ON A4 PAPER
- PC USERS: PRESS CTRL + P ON YOUR KEYBOARD AND MAKE SURE THE SCALE IS SET TO 100%
- MAC USERS: PRESS COMMAND + P ON YOUR KEYBOARD AND MAKE SURE THE SCALE IS SET TO 100%
AFTER PRINTING
PLEASE CHECK YOUR PRINT IS SCALED AT 100%. GET A REAL RULER AND COMPARE WITH THE LINE BLOW. THIS SHOULD MEASURE EXACTLY 25MM / 2.5CM. IF IT DOESN’T PLEASE CHECK YOUR PRINT SETTINGS.
METHOD 01 – IF YOU HAVE AN EXISTING RING
STEP 01
START WITH PLACING YOUR RING ON TOP THE SMALLEST CIRCLE, MOVING UP A CIRCLE
UNTIL THE INSIDE OF YOUR RING TOUCHES THE BLACK OUTLINE.
TOP TIP:
WHEN YOU’VE FOUND YOUR CIRCLE, DOUBLE CHECK THIS. PLACE THE INSIDE OF YOUR
RING FROM ALL 4 SIDES OF THE CIRCLE YOU’VE SELECTED TO MAKE SURE THERE’S NO
EXTRA SPACE, OR TOO LITTLE.
STEP 02
IF YOU FIND YOUR RING SIZE IS INBETWEEN SIZES: FOR WIDE AND THICK BANDS/RINGS
SIZE UP. FOR REALLY THIN BANDS OR BANDS WITH A HEAVY STONE, YOU CAN GO A SIZE
DOWN.
METHOD 02 – IF YOU DON’T HAVE A RING
TOP TIP:
MEASURE WHEN YOUR HANDS ARE WARM. COLD HANDS ARE USUALLY SLIMMER, AND WILL NOT
GIVE YOU AN ACCURATE READING.
STEP 01
CUT OUT THE RING SIZER ABOVE
STEP 02
CUT A SLIT WHERE POINT A’S LINE IS
STEP 03
PULL THE POINTED EDGE OF THE SIZER THROUGH THE SLIT TO MAKE A LOOP. MAKE SURE
THE NUMBERS ARE VISIBLE
STEP 04
PUT THE RING SIZER ON YOUR FINGER AND ADJUST THE END OF THE LOOP UNTIL IT
FEELS SNUG. LIKE HOW YOU’D LIKE YOUR RING TO FIT.
STEP 05
READ THE NUMBER ON THE SLIT TO GIVE YOU YOUR RING SIZE.
