Kangjinda Q1 Portable Speaker User Manual
- June 16, 2024
- Kangjinda
Table of Contents
Portable Speaker Manual
Model: Q1
Features:
This product is designed to be portable, simple and professional in
appearance. It takes into account both home KTV and outdoor KTV occasions; It
is suitable for personal business, home entertainment, conference, teaching
and training.
This product comes with one wireless microphone and one wired microphone for
different environmental experience.
Built-in BT function to allow connection with your mobile phone or computer
for karaoke enjoyment.
6.35 interface for external connection with instruments and wired microphones.
When singing or speaking, the background music can be transmitted to the
speaker in two ways, BT or Line-in.
The microphone volume and reverb effect as well as the master volume can be
adjusted independently.
The display screen can display the battery status and mode.
TF card and USB play function for selection of previous and next songs.
Mode switch function, etc.
Product Introduction
Front panel
- ECHO: reverb volume button
- MIC VOL: microphone volume button
- Charge-red Full-off: power indicator light
- DC5V: charging port
- TF card play port
- USB play port
- MODE: Mode switch
- ****Previous song
- ****Play/Pause
- ****Next song
- LINE: audio source input
- MIC: external connection with instruments or wired microphones
- VOLUME POWER: 1. master volume knob/power switch
- Display screen
| VIC1 | Mc2 |
|---|
1. Display screen
2. short press to power on
3. short press to power off
4. Battery installation| 1. ON : push up to power on
2. OFF: push down to power off
3. Microphone cable can be split
4. Plug and play
|
Technical Parameters
SNR: >70dB Power: > 15W
Maximum support capacity and format of TF card/USB play audio: 32G/MP3
Operating current of speaker: 2-4A
Power supply of speaker: 5V power adapter or mobile power
Power supply of wireless microphone: 3V (2 sections of 1.5V, AA batteries)
Distance for wireless microphone: >10m
Distance for BT: >10m
Packing List
Microphones (complimentary) ———2 pcs
Charging cable ———1 pcs
Crossbody strap ———1 pces
Manual ——— 1 pcs
Handling of Simple Faults
-
BT cannot be connected
The speaker will automatically enter BT mode after power on, and enter wired mode after inserting an external audio source, which can be switched by short pressing the mode switch button. -
The speaker cannot be powered on
The speaker is out of power. It should be fully charged first. -
No sound in the speaker:
The master volume may be turned down, and the knob can be adjusted to turn up the volume. -
The microphone cannot be powered on:
The battery has no power or insufficient power, the power switch is not turned on or no battery is installed. -
No sound or squeaking of the microphone:
The knob of microphone volume or master volume is adjusted, the microphone is not powered on or the battery has no power; if the squeaking is caused by the microphone being too close to the speaker, or the speaker volume is too large, you can turn down the volume appropriately and keep the microphone and speaker farther away.
FCC Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device
can be used be in portable exposure without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>