Cato LXL124550 Tante Bep Cardboard Suspension Installation Guide
- June 16, 2024
- Cato
Table of Contents
Cato LXL124550 Tante Bep Cardboard Suspension
Product Information
Specifications
- Model: LXL124550
Product Usage Instructions
Installation Instructions
- Warning: Ensure that the main power source is turned off before installing the product.
- Assemble the lamp according to the instructions in the drawing.
- Connect the lamp to the main supply with the terminal block.
- Make sure that the cables are connected securely to the terminals on the device.
- When the installation is complete, activate the power source and test the function.
FAQ
- Q: Can I install the product without turning off the main power source?
- A: No, it is important to ensure that the main power source is turned off before installing the product to prevent any electrical hazards.
- Q: Can I use the product without connecting it to the main supply?
- A: No, the lamp needs to be connected to the main supply using the provided terminal block for proper functioning.
- Q: What should I do if the cables are not securely connected to the terminals?
- A: Make sure to double-check the cable connections and ensure they are securely attached to the terminals on the device. Loose connections can cause malfunctions or safety risks.
- Q: How do I test the function of the installed lamp?
- A: After completing the installation, activate the power source and observe the lamp’s function. If there are any issues, refer to the troubleshooting section in the user manual or contact customer support.
Installation instructions
- Read the instructions carefully before installing the product. Save the instructions manual for future reference. Installation only by persons with electro-technical knowledge and experience.
- Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
- In case the product is made for indoor use, it should be used in a dry and clean environment only (IP20). Do not install or use the product outdoors. The product should not come in contact with water, damp,ness or other fluids.
- The light source can get hot. Pull out the plug and let the light source cool down before replacing it.
- Only use a dry cloth for cleaning the product.
- Warning : ensure that the main power source is turned off before installing the product.
- Assemble the lamp according to the instructions in the drawing.
- Connect the lamp to the main supply with the terminal block.
- Make sure that the cables are connected securely to the terminals on the device.
- When the installation is complete, activate the power source and test the function.
Safety guidelines
Notes on disposal
The product is designated for separate collection at an appropriate collection point Do not dispose of the product with household waste. For more ? information, contact the retailer or the local authority responsible for waste manogemool Care Before deaning the unit, disconnect ii from the power ou?el, if necessary. Do not use oggressive cleaning agents
Warranty
The unit has been carefully checked for detects. If nevertheless, you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of purchase.c
Safety
General advice
- Read the manual carefully before use. Keep the manual for future · use of the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- Do not modify the product in any way.
- Do not expose the product to water or moisture (IP20)
- Do not immerse the product in water (IP44 – 1P66).
- Keep the product away from heat sources.
- Do not block the ventilation openings.
- Do a lot of diving once sh see the lamp and the surface being illuminated.
Electrical safety
- To reduce the risk of electrical shock, this product should only be opened by an authorized technician when service is required.
- Do not use the product if the cable or plug is damaged or detective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified agent.
- Caution, risk of electric shock.
- The external flexible color cord is Damaged, and the luminaire has to be destroyed.
- This product is not a toy – please keep it inaccessible to children.
Disclaimer
We reserve the right to make technical modifications without notice. We are
not liable for damage arising from incorrect handling, improper use, or wear
or tear.
Documentation
The product has been manufactured and supplied in compliance with all
relevant regulations and directives, valid for all member states of the
European Union. The product complies with all applicable specifications and
regulations in the country of sale. The declaration of conformity is available
upon request.
CE declaration
This product complies with the following directives: LVD: 2014/35/EU (Not
applicable for solar products) EMC: 2014/30/EU RoHS: 2011/65/EU Additionally,
for products with Radio transmitter units: RED: 2014/53/EU
Imported by Lumen Import B.V. Postbus 15980, 1001 NL Amsterdam, the
Netherlands
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>