Century Electronic M1 Mini Bluetooth Speaker User Manual

Century Electronic M1 Mini Bluetooth Speaker User Manual

Product Overview

1. Speaker
2. Micro USB socket
3. Button
4. LED indicator
5. Hole for cord
6. Hole for MIC

Charging the battery:

1. Insert the charging cable into the Micro USB input port, Connect the USB plug into 5V USB power terminal. The LED indicator will turn red.
2. After charging completed, the red LED indicator will turn off.

NOTE: When music sound become smaller and you hear the warning tone “DI DI”, please charge this speaker in time. Bluetooth pairing for music/ phone call.

1. Turn on the speaker by pressing button for 3 seconds, The speaker will have a Voice prompt and blue indicator will Flash.
2. Turn on your device and activate the BT function.
3. Search for Bluetooth pairing name “MT” and click to pair, The speaker will pair automatically and the speaker will have a voice prompt, the blue indicator will light on. Then, just need to press button to answer the call when the call is coming.
4. Turn off the speaker by pressing button 4 seconds and the speaker will sound “DIDO”NOTE:
5. When you can’t play the music, please refresh the Bluetooth connection.
   Taboo: Play while charging

Specification:

• Power Rating: 2W
• Frequency Response: 20HZ-20KHZ
• Charging time: 1 hour
• Playback time: 1-2hours
• Speaker Parameter: 5*302W
• Battery: 3.7V/200mAh
• Wireless Version: V5.0
• Battery Charging voltage: 5V

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>