VIVITAR ISK207 Light-Up Karaoke Machine With Dual Mics User Manual

: June 16, 2024
: Vivitar

Table of Contents

VIVITAR ISK207 Light-Up Karaoke Machine With Dual Mics
Product Information
Product Usage Instructions
Charging the Speaker and microphones

VIVITAR ISK207 Light-Up Karaoke Machine With Dual Mics

Product Information

Specifications

Built-In Media Controls
2 Wireless Microphones
DC 5V Micro-USB Charging Port
TF and Micro SD Memory Card Support (up to 32GB)

Contents

Speaker
Microphones (2)
USB Charging Cable
AUX-In Cable
User Manual with Warranty Information

Product Usage Instructions

Charging the Speaker and microphones

To charge both microphones and speakers:

Attach the small end of the Micro-USB charging cable (included) to the unit’s charging port.
Attach the other end to a USB power port on a computer or USB charging adapter. CAUTION: Do not play music while units are charging.
For Speaker: A RED light will turn ON while the units are charging, and become blue once charging is complete.
For Microphone: A RED light will turn ON while the units are charging, and turn OFF once charging is complete.
Mic Battery Capacity: 3.7V/500mAh, Working time: 15-20 hours, Standby time: 3 months.

Pairing the Speaker

To pair the speaker:

Turn ON the speaker. Once the device is ON, you will hear “It’s Karaoke Time!”

Using the Speaker and microphones

Power On/Off:

Push the power switch on the speaker to the ON position to turn ON.
Push to the OFF position to turn OFF.
Press and hold the Power button on the microphone to turn ON.
Press and hold the Power button to turn OFF.

Pause/Play:

Press the Pause/Play button to pause the music.
Press again to play.

Adjusting Volume:

Press the Volume – button to decrease the volume.
Press the Volume + button to increase the volume.

Echo, Mute, and Magic sound modes:

Short press the Power button on the microphone to switch between Echo and Mute mode.
Double-click the microphone key to enter magic sound mode.

Light Button:

Press the light button to switch the color light mode and turn off the front light.
Double-click the light button to turn ON/OFF the disco ball light.

Switching Modes

To switch modes:

To enter memory card mode, insert an SD card into the TF memory card slot. You will hear “Memory Card Mode”.
To enter USB mode, insert a USB into the USB port. You will hear “USB Mode”.

Using the USB Port and Memory Card Slot

Your speaker comes with a USB Port and a TF/Micro SD Memory Card Slot:

When a USB thumb drive or jump drive is inserted into the USB Port, your speaker will play any .MP3. WMA, or. WAV music file stored on the drive.
When a TF or Micro SD memory card is inserted into the TF Card Slot, your speaker will play any .MP3 music file stored on the card.

FAQ

Q: How long does it take to charge the speaker and microphones?
A: Charging time may vary depending on the power source, but it typically takes a few hours to fully charge the speaker and microphones.
Q: Can I use the speaker while it is charging?
A: No, it is recommended not to play music while the units are charging to avoid any potential issues.
Q: How do I pair the microphones to the speaker?
A: To pair the two microphones to the speaker, press and hold the Power button on each microphone after connecting the speaker to Bluetooth. The indicator lights on the microphone will flash blue and red before pairing. After successfully pairing, the light indicator will stay red.

Features

Built-In Media Controls
2 Wireless Microphones
DC 5V Micro-USB Charging Port
TF and Micro SD Memory Card Support (up to 32GB)

A Quick Look

Speaker Controls and Ports

Charging the Speaker and microphones

To charge both microphones and speakers, attach the small end of the Micro-USB charging cable (included) to the unit’s charging port.
Attach the other end to a USB power port on a computer or USB charging adapter . CAUTION: Do not play music while units are charging.
For Speaker: A RED light will turn ON while the units are charging, and become blue once charging is complete.
For Microphone: A RED light will turn ON while the units are charging, and turn OFF once charging is complete.
Mic Battery Capacity:3.7V/500mAh, Working time:15-20hours, Standby time:3 months.

Pairing the Speaker

Bluetooth Pairing

Push the power switch on the speaker to the ON position to turn the speaker. Once the device is ON you will hear “It’s Karaoke Time!”.
Open your smartphone’s Bluetooth menu to enable Bluetooth and search for Bluetooth devices. Select “ISK207 Karaoke Speaker” from the list of devices.
After successfully pairing, you will hear “Let’s Sing!” from the speaker. Note: If a previously paired device is in range while the speaker is ON, the speaker will connect to it automatically.

Pairing the Microphones to the Speaker
To pair the two microphones to the speaker, press and hold the Power button on each microphone after connecting the speaker to Bluetooth. The indicator lights on the microphone will ﬂash blue and red before pairing.
After successfully pairing, the light indicator will stay red.

Using the Speaker and microphones

Power On/Oﬀ
Push the power switch on the speaker to the ON position to turn ON. Push to the OFF position to turn OFF. Press and hold the Power button on the microphone to turn ON. Press and hold the Power button to turn OFF.
Pause/Play
Press the Pause/Play button to pause the music. Press again to play.
Adjusting Volume
- Press the Volume – button to decrease the volume.
- Press the Volume + button to increase the volume.
Echo, Mute and Magic sound mode
Short press the Power button on the microphone to switch between Echo and Mute mode. Double-click the microphone key to come into magic sound mode.
Light Button
Press the light button to switch the color light mode and turn oﬀ the front light. Double-click the light button to turn ON/OFF the disco ball light.
Switching Modes
To enter memory card mode, insert an SD card into the TF memory card slot. You will hear “Memory Card Mode”. To enter USB mode, insert a USB into the USB port. You will hear “USB Mode”.

Using the USB Port and Memory Card Slot

Your speaker comes with a USB Port and a TF/Micro SD Memory Card Slot.
- When a USB thumb drive or jump drive is inserted into the USB Port, your speaker will play any .MP3, .WMA, or .WAV music ﬁle stored on the drive.
- When a TF or Micro SD memory card is inserted into the TF Card Slot, your speaker will play any .MP3 music ﬁle stored on the card.

Speciﬁcations

USB/Memory Card Support: MAX 32GB
Horn Speaker Power Output: 15W
Battery Capacity: 7.4V/1200mAh
Power Input: 5V
Charging Cable: Mirco-USB
Horn Speaker Frequency: 100HZ—18KHZ
Driver Unit: 1×3 inches
Power Supply: Built-in Li-battery

Safety Precautions

When using your Karaoke Speaker, basic safety precautions should always be followed including

READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER AND MICROPHONES.
Do not submerge the speaker and microphones in water. Do not place the speaker and microphones on wet surfaces.
Only clean using a clean, soft cloth.
Products may contain small pieces that can be a choking hazard. Parental supervision is advised.
Do not expose the speaker and microphone to excessive heat or fire.
Do not expose the speaker and microphones to extreme cold or hot temperatures to avoid battery damage.
Do not attempt to repair the speaker and microphones yourself. Contact a qualified service center if the product is in need of service.
Do not drop, crush, or expose the speaker and microphone to excessive physical force.
Do not charge while the speaker and microphones are in contact with water as electric shock may occur.
Unplug the charging cable when not in use or during thunderstorms.
Do not play music while the speaker and microphones are charging.
Do not point the microphones toward the speaker while turned ON.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

One Year Warranty

This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification, or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or visit our website at www.vivitar.com.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of the authorized service entered at your expense Do not indire any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

For Consumers in Australia Only

Faulty products should be returned to the point of sale, requiring proof of purchase for a refund or exchange. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fai to be of acceptable quality and the failure does not amount to a major failure For all Technical Support in Australia please dial 1-800-006-614