Jiayi B08FHZLTZS Push Latch For Cabinet User Guide
- June 15, 2024
- Jiayi
Table of Contents
Jiayi B08FHZLTZS Push Latch For Cabinet
Product Information
The Push Latch for Cabinet is a device used to secure cabinet doors and keep them closed. It consists of a magnet latch and a metal plate that are installed on the inside of the cabinet door and frame.
Specifications
- Latch Type: Push Latch
- Material: Metal
- Latch Distance: 5mm/0.19in
Product Usage Instructions
Step 1: Prepare Installation
Reserve a 5mm distance from the door side before starting the installation
process.
Step 2: Install Adjustable Holes
-
When installing, drill the adjustable holes before the stationary holes in the front of the cabinet.
-
Install with the adjustable holes only, and test the distance to ensure it is working properly.
Step 3: Align and Attach the Plate -
Align the plate with the inner core of the magnet latch.
-
Press down until it locks into place, and tear off the double-sided adhesive of the plate.
Step 4: Fix the Plate and Close the Cabinet Door -
Close the cabinet door and then press the door to release the lock.
-
The plate will automatically position itself in the correct position.
-
Fix the plate in place using screws.
Step 5: Adjust and Secure the Distance -
Loosen the screws of the adjustable holes in order to adjust the distance.
-
Once the desired distance is determined, drill the stationary holes to hold it in place permanently.
FAQ (Frequently Asked Questions)
Q: Can I use this latch on any type of cabinet?
A: The Push Latch for Cabinet is designed for use on most standard
cabinets. However, it may not be suitable for cabinets with irregular or non-
standard door designs.
Q: Can I remove the latch once it is installed?
A: Yes, the latch can be removed if needed. Simply unscrew the plate and
remove it from the cabinet door and frame.
Push Latch for Cabinet
INSTRUCTION
- Reserve 5 MM distance from the door side.
- When installing drill the adjustable holes before the stationary holes in the front. Install with the adjustable holes only, test the distance to make sure it’s working properly.
- Align the plat with the inner core of the magnet latch, press down until it locks, and tear off the double-sided adhesive of the plat.
- Close the cabinet door and then press the door to release the lock so that the plat is automatically positioned in the correct position and fix them using screws.
- Loosen the screws of the adjustable holes in order to adjust the distance.
- The distance is determined, then drill the stationary holes to hold it in place permanently
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>