Baby Brew N1 Portable Bottle Warmer User Manual

Baby Brew N1 Portable Bottle Warmer

Read this user mannual carefully before using your portable bottle warmer, and save the user manual for future reference.

Overview

Parts list

1. Adapters ×5
2. Bottle Warmer Cover x1
3. Type-c cable x1
4. Bottle Warmer Host x1
5. Baby bottle x1

Control panel

1. Thaw mode
2. 4 Modes Switch
3. Power button/Mode Switch

Note: This product has a built-in li-lon battery. When the battery indicator red light is always on, we recommend that you use a certified 5V 2A adapter to charge warmer motor as soon aspossible.

Maintenance And Cleaning

Daily cleaning

1. You must clean the bottle warmer before and after each use.
2. Unplug the USB charging cable, press and hold for 2 seconds to shut down, clean the stainless steel bottle cap and let it dry.
3. Do not put this product directly in the sink for cleaning. During the cleaning, you can wipe these parts clean with a clean soft cloth, and do not lose the waterproof sealing ring.

Maintenance

According to the frequency of using the warm milk, it is recommended that the bottle warmer be descaled and maintained every other month to ensure the warming efficiency of the milk warmer.

1. Put in white vinegar and warm water.then heat for 30 minutes to descal till all the incrustations in the bottle warmer are dissolved.
2. Clean and dry the stainless steel thoroughly.

Note: You can also use citric acid descaling deaner, do not use other types of deaner.

Safety Information

Operation Cautions

• This product should be used under adult supervision, and all parts of this product should not be used as toys. When not in use, please keep the unused parts out of the reach of children.
• Before each use, check the condition of the product and clean it. Please use this product in an environment of 50°F~95°F.
• Do not use corrosive cleaners or antibacterial cleaners to clean this product. High concentrations of detergent can cause plastic parts to crack. Once cracked, replace with new parts immediately.
• The heating time should not be too long. After the product is heated to the specified temperature, you can use this product to keep breast milk, but it is recommended not to exceed half an hour, because the milk is easily deteriorated for more than half an hour and is not good for the baby’s health.
• The heating time provided in this manual is a reference value for the heating time under specific conditions. The actual heating time is affected by multiple conditions, such as ambient temperature, bottle material, starting temperature, milk volume, etc.
• During the use of the bottle warmer, please do not touch the mold thermally conductive metal cover to avoid burns.
• It is recommended that the product be matched with an adapter (input: 100- 240V~50/60HZ 0.45A, output: 5.0V2000mA) that meets local safety requirements.
• The milk warmer of this product has a built-in polymer rechargeable battery. It is forbidden to use it in an environment with strong static electricity or magnetic fields, so as not to damage the battery installation protection device and bring safety accidents.

Instructions

1. Take off the cover, choose an adapter that fit your baby bottle.
   • Note: If using the bottle included in our accessories (or your baby bottle is compatible with the warmer host), there is no need for an adapter.
2. When installing the adapter or feeding bottle, align the adapter and the feeding bottle with the groove of the milk warmer and the feeding bottle interface, and tighten; please use moderate force to avoid damage to the feeding bottle and adapter.
3. Fill the bottle with milk,turn the body of the milk warmer upside down, then tighten it.
4. Long press the power button “ ” to turn on and start the bottle warmer.
5. The milk warmer will automatically check the milk temperature after turning on. When the temperature is ≤ 68°F, change to unfreeze mode mode “ ” ,* blue light gradually on and off in circle, when reach temperature 86°F finish unfreeze, change to 98°F warm milk mode.
6. Short press ” ” switch to warm milk mode, there are 4 temperature ranges in this mode (98°F/104°F/113°F/122°F), select the warm milk temperature you need, after the warm milk completed, it beeps and enters the insulation state, the indicator light is always green.

Applicable Most Major Baby Bottle Brand List

Note: Glass baby bottles are not compatible.

L-sealing Ring of Host

L shape:

Tip: The L-shaped sealing ring we have installed it on the bottle warmer host for you already in advance.

Technical Parameters

Parameters

• Model: N1

• Product Size: 81x81x109mm

• Charging Input: 5V/2A
  

• Output Voltage: 6.6V~8.4V

• Max Power: 45W

• N.W.: 395g

• Battery: 10000mAh

Troubleshooting

• What is the use of the baby bottle included in the accessories?
  1. Use our bottle to heating the milk after transferring it to your baby bottle if your baby bottle can not compatible with our warmer/adapters.
  2. You can feeding your baby with our bottle.
• Can I use the bottle warmer to keep water/breast milk all night?
  1. You can keep water warm overnight.
  2. You can Keep milk warm overnight. But less then half an hour is suggested. Milk is perishable if stored over half an hour.
• What should I do when white or rust-colored spots appear inside the bottle warmer?
  1. The white or rust-colored spots are scale deposits. Mix white vinegar or citric acid descalers with over 122ºFhot water, leave the solution in the bottle warmer for about 10 minutes until all scale has dissolved.
  2. It is recommended to use pure water or distilled water to heat and feed.
• Why the lower ambient temperature, the longer heating time?
  • Lower ambient temperature, lower initial water temperature, long heating time.
• Can it work during charging?
  • It can work during charging but you need to make sure the battery is more than 50% in case that can not heat up to the certain temperature for low battery.
• Why the warmer is still warning when there is already water inside?
  • When adding hot water to keep warm, please wait 10 to 30 seconds before power on the warmer, in case of the false alarm due to the temperature difference between hot water and warmer.

us_supportcare@163.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>