DreamColor D22123 Light Controller User Manual
- June 15, 2024
- DreamColor
Table of Contents
DreamColor D22123 Light Controller
Product Information
Specifications
- Product Name: Light Controller
- Version: v2.0
- Email: EmailServicevvip1@outlook.com
Introduction
The Light Controller allows you to adjust the colours, brightness, preset
modes, DIY modes, and music modes using the accompanying mobile app.
Installation
To install the Light Controller:
- Plug the controller into a USB adapter or laptop USB port.
- Place the light controller in the desired location.
- Note: The strip light is waterproof, but the controller is not.
- Caution: Do not pull the string with excessive force as it may break.
- If you have any questions or encounter any defects, please contact us.
Control by App
To control the Light Controller using the mobile app:
- Download and install the app on your phone.
- Turn on the Bluetooth on your phone.
- Open the app and tap the + icon in the top right corner to search for new devices.
- The app will display the found device, simply add it.
- Tap the device icon to enter the control panel.
Remote Control
The Light Controller can also be operated using the included remote control.
The remote control features buttons for various functions:
- Power on and off
- Brightness up and down
- Play and pause
- Seven basic static colors: Red, Green, Blue, Purple, Yellow, Cyan, White
- Show mode: Long press White till blink then press brightness up/down to change pixel num
- Auto mode cycling
- Speed up and down
- Mode up and down
- DIY1 and DIY2: Long press to save current mode, short press to activate
- Directions switch
- Music Sync mode switch
Troubleshooting
If you encounter any issues or need assistance, please contact our customer
service for lifetime technical support at
EmailServicevvip1@outlook.com. We aim
to respond within 24 hours.
FAQ
-
Q: Can the Light Controller be used outdoors?
A: The strip light is waterproof, but the controller is not. Therefore, it is recommended to protect the controller from exposure to water or moisture. -
Q: How do I change the color and brightness of the lights?
A: You can adjust the colors and brightness using the mobile app or the included remote control. Refer to the user manual for detailed instructions on using the app or remote control. -
Q: Can I create my own lighting modes?
A: Yes, the Light Controller allows you to create and save your own DIY modes. Refer to the user manual for instructions on how to save and activate your custom modes. -
Q: How do I sync the lights with music?
A: The Light Controller has a Music Sync mode. To activate this mode, refer to the user manual for instructions on using the app or remote control.
Introduction
This controller, With the APP, your can adjust its colors, brightness, preset modes, DIY modes and music modes.
INSTALLATION
Plug the controller into USB adapter or laptop USB port . Then put the light controller where you want.
- The strip light is waterproof, while the controller is NOT.
- Do not pull the string with much strength otherwise it may break.
- Any question or defect issue please contact us.
Note: The controller with lights’s power no larger than 5W, the output of any USB port of the laptop can drive the device to work.
Control by app
- Download APP and install on your phone.
- Turn on the Bluetooth on your phone.
- Open the APP, tap the “+” icon in the top right corner and search new device.
- APP will show the device found, just add it.
- Tap the device icon to enter control panel.
Remote
Troubleshooting
-
APP can not find the device.
- Make sure the phone bluetooth is on.
- Allow the permissions of APP. APP needs them to connect the device. Check string light is on.
- Kill APP, turn off bluetooth and turn on bluetooth again, then start
- APP to add device again.
- Ensure phone is within 4ft of product without obstructions when connecting.
- Your phone may be incompatible with the APP, try another phone.
-
All lights don’t work.
Check power is on. Connect APP and turn on light and turn up brightness. -
Some light beads keep off or fail working.
Check the pixel num setting on APP. Contact us.
Customer Service
- Support: Lifetime Technical Support
- Email: Servicevvip1@outlook.com
- Please contact us if you have any problem or get a defective product.
We will reply within 24 hours.
FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital, under Part 15 or the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications, However, there is no guarantee
that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Email: Servicevvip1@outlook.com