VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand User Manual

June 15, 2024
Vivitar

VIVITAR Logo 2 in 1 charging phone stand
ITEM FBWDS-BLK
USER’S MANUAL

Thank you for purchasing the Vivitar 2in1 Charging Phone Stand, item FBWDS- BLK. Your phone stand can charge two devices at once with a 10W device charger and a 3W Apple Airpod charger. Please read this manual carefully FIRST in order to get the most out of your phone stand.

Power

Use the included USB-C Cable to power your phone stand.VIVITAR FBWDS-BLK 2
In 1 Charging Phone Stand - Charging Port

  1. Insert the USB-C end of the charging cable into the phone stand’s Charging Port.VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand - USB-C

  2. Insert the USB-A end of the charging cable into a suitable USB charging adapter.
    NOTE: Once plugged in, the LED Indicator Light on your stand will turn on red and blue momentarily, then turn off.

  3. Once your phone stand is powered on, you can use it to charge your devices.

Charging a Phone

VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand - Charging
PadIf you have a phone with wireless charging capability, place it on the Smartphone Charging Pad to charge it. To do so, follow the steps below.

  1. Before placing your phone on the charging pad, make sure your phone stand is plugged into a power source.
  2. Remove any case or protective cover that may block the back of your phone so that it rests against the smartphone charging pad. VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand - Remove any
  3. Place the back of your phone on the center of the charging pad horizontally. The back of your device should be laid flat on the charging pad.
  4. Once the charging pad is in contact with the back of your phone, the phone should start charging. Use the display screen on your phone to track the charging progress.
  5. Leave your device on the charging pad to charge. When the charging pad is charging a device, the indicator light will turn on blue.

NOTE: While the charging pad is compatible with most devices that have Qi charging capability, it may not be compatible with some older versions of these devices.

Charging Airpods

VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand -
Airpods

You can also charge Apple AirPods by placing them on the Airpods Charging Pad.
There is no indicator light on the charging pad when the Airpods Charging Pad is charging a device, use the indicator light on your Airpods to track the charging progress.
If both charging pads are being used, the indicator light will turn on blue.
Remove your devices once fully charged.
NOTE: For best results, use a plug-in adapter with power above QC 18W when charging 2 devices at once.

Specifications

Charging Input: 9V *** 2A / (QC 18W)
Wireless Charger Output for Smartphone: 10W/7.5W/5W
Wireless Charger Output for AirPods: 3W
*For best results, use a plug-in adapter with power above QC 18W when charging 2 devices at once.

Package Contents

  • 2 in 1 Charging Phone Stand
  • USB-C Power Cable
  • User’s Manual with Warranty Information

Compatibility

Compatible with Wireless Charging Enabled Devices: iPhone 15/14/13/12/11/X/8 series Samsung S22/S21/S20/S10/S9/S8 series AirPods 3/2/Pro series

Safety Precautions

When using your stand, basic safety precautions should always be followed, including the following:

  1. READ ALL INSTRUCTIONS BEFORE USING YOUR STAND.
  2. Never expose your stand to high temperatures, extreme cold, high humidity or any moisture or water.
  3. In order to avoid the risk of electric shock, never attempt to open your stand or repair it without the assistance of certified professionals.
  4. Your stand is not to be used by children or the infirm without suitable adult supervision.
  5. Do not manhandle your stand.
  6. Do not use your stand at temperatures under 32°F (0°C) or over 104°F (40°C).
  7. Do not drop your stand, throw it, or subject it to strong impacts or physical trauma.
  8. If you detect any abnormalities when using your stand, contact the manufacturer for support. In addition, do not continue to use your stand if you detect any smoke or fire.
  9. Unplug your stand when not in use for extended periods of time.
  10. When charging, do not place your stand on flammable materials such as rugs, carpets or bedding.
  11. Please recycle or dispose of your stand properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of for further information.
  12. Clean your stand using a soft cloth or paper towel. Do not use harsh chemicals when cleaning your stand, and never submerge your stand in water.
  13. Do not place any metallic items other than compatible smartphones or Airpods on the charging surfaces.
  14. Only place Qi compatible phones on the charging surface. The use of incompatible phones can cause your charger to overheat.
  15.  Wireless charging may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz

Warranty

This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or visit our website at www.vivitar.com.
To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

FCC Statement

Warning
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand - Icon

VIVITAR Logo © 2023 Sakar International
195 Carter Drive
Edison, NJ 08817
Support: 800 592 9541
www.vivitar.com
* All brand, product names and logos are trademarks or registered trademarks of their respective companies.

Documents / Resources

| VIVITAR FBWDS-BLK 2 In 1 Charging Phone Stand [pdf] User Manual
FBWDS-BLK, FBWDS-BLK 2 In 1 Charging Phone Stand, 2 In 1 Charging Phone Stand, Charging Phone Stand, Phone Stand, Stand
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Vivitar User Manuals

Related Manuals