DAYETTE AP401 Ture Hepa Air Purifier User Manual

DAYETTE AP401 Ture Hepa Air Purifier

SAFETY INFORMATION

To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.

GENERAL SAFETY

• Only use your air purifier as described in this manual.
• Always place the air purifier on a firm, leveled surface.
• Do not use without removing the plastic wrap from the filter. The purifier will not filter air, and may overheat, causing a fire hazard.

IF THE POWER CORD OR UNIT DOES NOT WORK, CONTACT OUR CUSTOMER SERVICE IMMEDIATELY.

• Do not use your air purifier outdoors .
• Keep your air purifier away from water, and wet or damp areas. Never place in water or liquid.
• Do not use in excessively humid areas .
• Keep your air purifier away from heat sources .
• Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
• Keep 5ft /1.Sm away from where oxygen is being administered .
• Supervise children when they are near the air purifier.
• Do not place anything into any opening on the air purifier .
• Do not sit or place heavy objects on the air purifier .
• Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
• Always unplug your air purifier before servicing (such as changing the filter).

POWER &CORD

• Keep the air purifier near the outlet it is plugged into .

• Never place the cord near any heat source .

• Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.

• Keep the cord out of areas where people walk often .
  Place the cord where it will not be tripped over.

• Check your air purifier cord and plug connections. Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tightly in the outlet.

WARNING

• If the power adapter is damaged, please contact our customer service directly to replace with new replacement.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the product needs to be shut down during use, please shut down normally and then unplug the power supply. Abnormal power failure may cause product failure!
• Children should be supervised to ensure that children do not play with electrical appliances.
• This air purifier has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE.

PACKAGE CONTENTS

• 1 x Air Purifier
• 1 x H13 True HEPA Filter (Pre-Installed)
• 1 x Power Adapter (Put inside filter)
• 1 x Remote Control
• 1 x User Manual

NOTE: power adapter put inside the air filter, please take air purifier out of box first, remove the clear plastic bag and open bottom filter cover to take filter out, then take the power adapter out. Finally put air filter back and lock filter cover.

SPECIFICATION & UNIQUE FEATURES

GENUINE TRUE HEPA H13 FILTRA T/ON SYSTEM

• TRUE HEPA H13 FILTRATION
  Removes up to 99.97% of airborne particles
  as small as 0.3 microns, such as allergens, pollen, dust, germs, pet dander, odor, mold spores, and smoke from the air that passes through the filter.

• High-Efficiency Activated Carbon Filter
  Physically adsorbs smoke, odors, and fumes. Especially effective for cooking smells and pet odors in a multiped household.
  Extends the life of the filter by chemically decomposing molecules trapped within the Activated Carbon Filter, which prevents oversaturation and second- hand pollution.
  Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs).

• PRE-FILTER
  Captures large particles such as dust, lint, fibers, hair, and pet fur. Maximizes the life of the True HERA Filter by protecting it.

• PROTECTIVE NET FILTER

Air Quality Indicator Chart & DIGIT AL DISPLAY
This indicator uses an automatic sensor to display the air quality.
This sensor uses an infrared light to detect airborne particles.

4SPEEDS
Low; Medium; High; Turbo(Top)

Auto Mode
Auto Mode adjusts the fan speed automatically based on air quality. For example, if the air quality is polluted, the PM2.5 indicator will be red, and the fan will be set to turbo speed.

Quiet Sleep Mode
All indicators will automatically turn off in sleep mode, only sleep mode indicator on.

Timer
You can set a timer between 1-12 hours .

Replace Filter Indicator
Illuminates when it is time to replace the filter .

Child & Pets Lock

Remote Control

KNOW YOUR AIR PURIFIER

A : Air Outlet
B : Control Panel
C : Air Inlet
D : Body Shell
E : Handle
F : Power Adapter Interface
G : Air Quality Sensor Cover
H : H13 HEPA Filter

Note: Filter and base are one-piece design.

CONTROL PANEL

A : On/Off Button
B : Fan Speed Button
C : Sleep Mode Button
D : Filter Rest Button
E : Timer Button
F : Child Lock Button

LED Display

1. PM2.5 Digital Display
2. Air Quality Indicator
3. Auto Mode
4. Smart Filter Replace Indicator
5. Timer Display
6. Low Speed
7. Medium Speed
8. High Speed
9. Turbo Speed (Top)
10. Child & Pets Lock
11. Sleep Mode
    

Note: all indicators on Led Display are not buttons, please use buttons on control panel.

Remote Control

On/ OFF Button
Speed Button
Filter Rest Button
Child Lock Button
Sleep Mode Button
Timer Button

Note: remote control comes without battery (2*AAA batteries needed).

How To Install Batteries For Remote Control?

1. Open battery cover and put 2*AAA batteries in correctly
   

2. Close battery cover
   

HOW TO USE

BEFORE TURNING THE UNIT ON

• Take the air purifier out of the box and remove the clear protective plastic bag. Open bottom filter cover to take filter out, then take the power adapter out. Finally put air filter back and lock filter cover.
• Place the air purifier on a firm, leveled surface.
• Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance.
• Please insert the plug into the power socket firmly. After switching the power on, the indicator light will flash.
• Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlets closer than 20cm.
• For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed for 15-20 minutes before using a lower speed or Auto Mode, and keep windows and doors closed while the air purifier is on.

TURN ON/OFF

• To turn the air purifier on, press the power button.
• Press power button again to turn off the air purifier. The air purifier will take about 15-20 seconds to detect the air quality each time it is turned on.
  During this time, the air quality indicator color will switch automatically from red, blue, green, yellow. After 15-20 seconds, the air quality indicator color will change based on the detected air quality. And the air pollution value is displayed in the front panel display.
  Note: air purifier is automatically in auto mode when turn on every time.

Switch Fan Speed

• This air purifier has 4 fan speed settings: low, medium, high and turbo(top).
  The higher the fan speed setting, the faster the air will be purified. To select or change fan speed, press the fan speed button  until the desired setting is reached.

• The speed indicator will change to show the speed you choose currently.
  Please check “LED Display” content for reference.

Auto Mode

• When at turbo speed, press fan speed buttor1 again to switch to auto mode. The auto mode indicator will light on LED Display. Then air purifier speed will automatically adjust based on air quality. If air quality is moderate, the PM2.5 indicator will be yellow, and air purifier will run at high speed.
• Press  button again change to low speed, and auto mode turned off.
  Note: air purifier is automatically in auto mode when turn on every time, not the speed you used last time.

Timer

• Press the timer button until the desired timer setting is lit on the display. The timer button will cycle through the following settings: 1 -2 -3-4- 5-6-7-8-9-10-11-12 hours and off. Once you choose a time, the timer will flash 3 times and start counting down. The air purifier will automatically power off once the timer is finished. If the timer indicator is off, it means the timer function is not turned on.
• To cancel the timer at any time, press the timer button and hold it for 2 seconds. If canceled successfully, there will be no countdown on the display.
  Note: the air purifier will run continuously when the timer function is off.

SLEEP MODE

• Press button to switch to sleep mode. All indicators will turn off automatically except the sleep mode indicator with only little light.
• Press sleep mode button again to turn off sleep mode, air purifier will run at low fan speed.
• Sleep Mode can also be turned off via fan speed button or timer button. But if you press timer button, the timer function will be activated.
  Note: sleep mode indicator could not turn off.

Child & Pets Lock

• Press the child lock & Pets Lock button and hold it for 2 seconds then all functional buttons will be locked. The child & pets lock indicator will light on led display.
• Press and hold again the child lock button for 2 seconds and all functional buttons will be unlocked.

Remote Control
Remote Control’s functions are same as touch control panel.
Please check above usage guide for reference.

HOW TO REPLACE FILTER

FILTER REPLACE IND/CA TOR

• The smart replace filter indicator illuminates when it is time to replace the True HEPA H13 filter based on the air purifier’s hours of use.
• For optimal performance, replace every 3,000 hours under normal usage conditions.
• Once the filter has been replaced, press and hold the filter replace filter button for 5 seconds to reset the indicator. If reset successfully, the filter replace indicator will turn off.

HOW TO REPLACE FILTER

NOTE: for safety consideration , please do unplug the power adapter before starting to replace filter.

1. Rotate the twist handle counterclockwise to unlock

2. Take the old filter out
   

3. Remove the new filter protective bag before installation. Place the filter into the air purifier and install the base cover properly

4. Tighten the filter buckle clockwise until it clicks into place
   

CARE & MAINTENANCE

NOTE: For the best performance, vacuum the pre-filter once a month under normal usage.

Cleaning the Air Purifier

• Wipe the outside of the air purifier with a dry cloth. Do not clean with water or any other liquid to avoid risk of electric shock.
• Clean the white side of the filter with a brush or vacuum hose each month to prevent buildup of hair or dust. Do not clean the filter with water or other liquids.

Cleaning the Air Quality Sensor

If the air quality sensor is blocked by accumulated dust, the air quality indicator may not work correctly.

1. Unplug the air purifier.

2. Open the sensor cover.
   

3. Dry the sensor lens with a dry cotton swab.

4. Close the sensor cover.

Storage

If not using the air purifier for an extended period of time, wrap the filter in plastic packaging and store in a dry place to avoid moisture damage.

When Should I Replace the Filter?

• The filter should be replaced every 6-8 months (3000h). But you may need to replace your filter earlier or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to change the filter more often, even if the filter replace indicator not Illuminates yet.
• You may need to replace your filter if you notice the below situation:
  • Increased noise when the air purifier is on
  • Decreased airflow
  • Unusual odors
  •  A visibly clogged filter
• To maintain the performance of your air purifier, please buy and use the official filters.

Use Environment
Moisture may damage the filter. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become moldy.

Note: Water or moisture will allow mold to grow. Air purifiers cannot solve an  existing mold problem, only remove mold spores and reduce odors.

Warning:

• Do not wash or spill this product with liquid.
  Keep your hands and fingers away from the high-speed wheel component rotating in the purifier. Avoid foreign objects entering the unit air vent, it may cause heat or damage to the unit.

• Children shall not play with the air purifier. This appliance can be used by children.
  In order to improve the purification effect, close the doors and windows when using the unit (to avoid carbon monoxide poisoning, properly ventilate when using a combustion unit).

• Please do not use any other power adapter than the one provided with the air purifier.

• Do not use the appliance in wet, moist areas such as bathrooms, steamy kitchens, or near swimming pools, otherwise, it may cause an electric shock.

Note: Water or moisture will allow mold to grow. Air purifiers cannot solve an existing mold problem, only remove mold spores and reduce odors.

Disposal and Recycling

This air purifier should be recycled as electronic waste and the filter recycled as plastic.

Tips to Buy Air Purifier

Clean Air Delivery Rate (CADR)
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that an air purifier produces per minute.
This is based on the removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants.

The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier’s highest speed.

But the CADR and the fan related to the noise, the higher CADR, the fan speed will be quicker, the noise will be louder too.

So please understand that if you use the higher fan speed and CADR air purifier, the noise will be a loud.

Air Change per Hour
The air change rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size assuming 8ft /2.4m ceilings.
For smaller rooms, the air change per hour will increase.

TROUBLE SHOOTING

intakes are not blocked or the front outflow area
Pre-filter needs vacuuming| Vacuum the pre-filter with the brush attachment of your vacuum cleaner
The filter needs to be replaced| Replace the filter
Reduced odor removal| The filter needs to be replaced|  Replace the filter
Excessive noise| The unit is not level| Place the unit on a flat and level surface
Replace filter light remains lit after filter replaced| The replace filter indicator needs to be reset| Press and hold the filter replace button for 5 seconds until the replace filter light turns off
Can’t feel the effect| Filter failure-replace the filter.
Use in inappropriate places (excessive area)| Check if filter in correct location
Use in bedroom, living room or other indoor places

CUSTOMER SUPPORT

If your problem is not listed here, please contact our Customer Support.

info@dayette.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>