msi PRO MP242A PRO Series LCD Monitor User Guide

msi PRO MP242A PRO Series LCD Monitor

This document provides instructions and information regarding hardware settings for the following MSI PRO Series LCD monitors:

• PRO MP242A (3PA1)
• PRO MP242AP (3PA1)
• PRO MP271A (3PA2)
• PRO MP271AP (3PA2)

Getting Started

When connecting devices, handle with care to avoid static electricity and use a grounded wrist strap.

Package Contents

Important:  Contact the place of purchase or local distributor if any items are damaged or missing. The included power cord is exclusively for use with this monitor and should not be used with other products.

Installing the Monitor Stand

Important:  Place the monitor on a soft, protected surface to avoid scratching the display panel. Do not use sharp objects on the panel.

For PRO MP242A/PRO MP271A models:

1. Leave the monitor in its protective foam packaging. Align the stand with the monitor groove and push the stand towards the groove until it locks into place.
2. Attach the base to the stand and tighten the base screw to secure it.

For PRO MP242AP/PRO MP271AP models:

1. Leave the monitor in its protective foam packaging. Align the standard bracket with the monitor groove.
2. Secure the standard bracket with screws.
3. Attach the base to the bracket and tighten the base screw.

Important:  The groove used for installing the stand bracket can also be used for wall mounting. Please contact your dealer for the correct wall mounting kit.

Adjusting the Monitor

This monitor is designed to maximize your viewing comfort with adjustable features.

Important:  Avoid touching the display panel when adjusting the monitor. Tilt the monitor slightly backward before pivoting.

Monitor Overview

Identify the following parts of the monitor:

1. OSD Buttons
2. Power Button
3. Kensington Lock
4. Power Connection
5. DisplayPort
6. HDMI™ Connector
7. D-Sub Port
8. Audio Line In
9. Headphone Connection

Connecting the Monitor to a PC

1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Connect the power cord to the monitor’s power input. (Image A)
4. Connect the power cable to the power outlet. (Image B)
5. Turn on the monitor. (Image C)
6. Turn on the computer, and the monitor will automatically detect the signal source.

OSD Settings

This chapter contains important information about OSD (On-Screen Display) settings.

Important: All information is subject to change without prior notice. The monitor comes with a set of OSD buttons that help operate the on-screen menu.

Specifications

FAQ

How do I adjust the monitor settings using the OSD?

Use the OSD buttons on the monitor to navigate through the menu and adjust settings such as brightness, contrast, and input source.

What should I do if the monitor is not displaying an image?

Ensure that the video cable is properly connected and that both the monitor and computer are turned on. If the issue persists, try selecting the correct input source through the OSD.

Can the monitor be wall-mounted?

Yes, the monitor can be wall-mounted using the standard VESA mount. Please refer to the installation instructions and ensure you have the correct wall mounting kit.

What is the recommended resolution and refresh rate for the monitor?

The recommended resolution is 1920 x 1080, and the monitor supports a refresh rate of up to 100Hz, depending on the model. Refer to the specifications table for detailed information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>