thermaltake Divider 500 TG ARGB Mid Tower User Manual
- June 4, 2024
- thermaltake
Table of Contents
thermaltake Divider 500 TG ARGB Mid Tower
Specification
| Model | Divider 500 TG ARGB | Divider 500 TG ARGB Snow |
|---|---|---|
| Case Type | Mid Tower | |
| Dimension (H x W x D) | 530 x 230 x 466 mm (20.9 x 9.1 x 18.3 inch) | |
| Side Panel | Tempered Glass x 4, Steel Side Panel x 2 | |
| Color | Black | White |
| Material | SPCC |
Cooling System
| Front (intake) :
120 x 120 x 25 mm ARGB fan
(1000rpm, 27.2 dBA) x 3
Rear (exhaust) :
120 x 120 x 25 mm fan
(1000rpm, 16 dBA) x 1
Drive Bays
|
2 x 3.5”, 5 x 2.5”
or 7 x 2.5”
Expansion Slots| 7 (Rotatable Patented Design)
Motherboards
| 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
I/O Port| USB 3.2 (Gen 2) Type C x 1, USB 3.0 x 2, HD Audio x 1
PSU| Standard PS2 PSU (optional)
Fan Support
| Front: 3 x 120 mm, 2 x 120 mm, 1 x 120 mm
3 x 140 mm, 2 x 140 mm, 1 x 140 mm
Top: 2 x 120 mm, 1 x 120 mm
2 x 140 mm, 1 x 140 mm
Right (M/B Side): 2 x 120 mm, 1 x 120 mm
Rear: 1 x 120 mm
Radiator Support
| Front: 1 x 360mm, 1 x 240mm, 1 x 120mm 1 x 280mm, 1 x 140mm
Top: 1 x 280 mm, 1 x 140 mm
1 x 240 mm, 1 x 120 mm
Right (M/B Side): 1 x 240mm, 1 x 120 mm
Rear: 1 x 120mm
Clearance
| CPU cooler height limitation: 150 mm
VGA length limitation: 360 mm (With radiator)
390 mm (Without radiator) PSU length limitation: 180 mm (With HDD Cage)
220mm(Without HDD Cage)
Accessory
One extra left side tempered glass and one extra right side panel are included for more assembly options.
Warning and Notice
Chassis dimension
Motherboard Compatibility: ITX / mATX / ATX (Up to 244mm wide
)
CPU cooler max height: 150mm
VGA length max length: 390mm
PSU max length: 180mm
Remove Components
DIFFERENT INSTALLATION METHODS
Power Supply Unit Installation
Motherboard Installation
3.5” HDD Installation
2.5” HDD Installation
PCI Card Installation
Air Cooling Installation
AIO Liquid Cooling Installation
I/O Connection
Remove Filters
ARGB Control Instruction
- Wave Mode Mode 1
- Flow Mode Mode 2
- RGB Lighting Mode 3 (Single Color)
- Radar Mode Mode 4-10 (Red, Yellow, Green, Cyan, Blue, White, Purple)
- Breath Mode Mode 11-18 (RGB, Red, Yellow, Green, Cyan, Blue, white, Purple)
- (Full Lighted Mode) Mode 19
- Single Color Mode 20-26 (Red, Yellow, Green, Cyan, Blue, White, Purple)
- Light Off Mode 27
Long press on the RGB button for 3 seconds, and the fan will blink twice which now are controlled by MB software. And vice versa.
How to connect MB
Documents / Resources
|
thermaltake Divider 500 TG ARGB Mid
Tower
[pdf] User Manual
Divider 500 TG ARGB Mid Tower, Divider 500 TG, ARGB Mid Tower
---|---