Anbbas B0B6PGWL8C Professional Ultrasonic Dental Cleaner User Manual
- June 15, 2024
- Anbbas
Table of Contents
Anbbas B0B6PGWL8C Professional Ultrasonic Dental Cleaner
Tips
The added strainer basket helps you to take the oral supplies out of cleaning solution easily, and rinse them with running tap water much easier and safer; The lid of device is with an extra advantage for your dental appliances air drying; And of course you can also use the machine for overnight soaking only, the strainer in K1.0 set also could be removed for more thorough cleaning.
Frequently Asked Questions
Q: Does it get cleaner the longer i wash it?
A: On a regular basis, all you likely need is a 1-2.5 min cleaning; If need to disinfect, add a tablets and press the button, forget it.
Q: Why does the water temperature rise?
A：The high frequency vibration will cause the water temperature to rise slightly, it's a normal situation, please don't worry.
Q: Why my adapter(charging box)gets hot?
A: For safety reasons, the continuous working time should not exceed 10 minutes, please stop for a few minutes, then continue the cleaning procedure.
Q: Why is the cleaning effect of my retainer/clear brace not so ideal?
A：According to the working principle, much more bubbles are near the tank bottom, the cleaning is stronger on that area; You could try to use less water if your orthodontic appliances float, and turn it over after cleaning for a few seconds, then go on cleaning; achieve faster cleaning, save time and electricity at the same time.
Q: Are there any jewelry to avoid cleaning in the ultrasonic bath?
A: Avoid soft stones such as pearls, turquoise, coral, emeralds, cracked and loose settings.
Q: What if my machine does not work?
A: Please give Anbbas another chance, don't hesitate to email us your issue, we can guarantee you will receive a 100% satisfaction once we solve the problem.
Notice
- Do not use warm/hot water and liquid bleach, tap water is sufficient.
- Do not plug in before adding cool water in the machine, and specifically warn against contact with heat supply source.
- Button, power port and the bottom of device can not touch water to prevent burning the internal chip.
- Please empty the tank after each use, and dry it with tissue(after cleaning with water)/wet towel(after cleaning with mouthwash, cleaning crystals and disinfection tablet).
Working Principle
42KHZ high-frequency vibration produce steady stream of bubbles, they burst continuously, the plaque and buildup are removed from the surface of your aligner in bubbles bursting process; it’s like a brush, but could reach places such as crevice and holes where a brush can’t reach; deep cleaning with no brushing and scratching.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>