Encyclpo UEH520 Infrared Electric Heater User Manual
- June 15, 2024
- Encyclpo
Table of Contents
Encyclpo UEH520 Infrared Electric Heater
MODEL :UEH520
1500 WATT | OUTDOOR
User Manual and Safety Instructions
SAVE THIS INSTRUCTIONS
Warranty & Customer support
This product is intended for domestic use only. Encyclpo will repair or replace the product, or any part of this product, (excluding batteries) free of charge if within 12 months of the date of purchase, it can be shown to have failed through defective workmanship or materials. This guarantee covers working parts that affect the function of the product. It does not cover cosmetic deterioration caused by fair wear and tear or damage caused by accident or misuse. Encyclpo shall not be responsible for any type of incidental, consequential or special damages. Opening or taking apart the product or its components will void the guarantee. Claims under guarantee must be supported by proof of purchase and be returned carriage paid to Encyclpo. Care should be taken in packing the product so that it is not damaged while in transit. This undertaking is in addition to a consumer’s statutory rights and does not affect those rights in any way.For questions, support, or warranty claims, contact us at the email address below. Please do include your Amazon order number and product model number.
Customer support : support@encyclpo.com
Statement
We can only provide after-sale services for the products that are sold by
authorized sellers. If you have purchased from an unauthorized seller, please
contact them.
Designed by : Shenzhen BaikePower Technology Co.,Ltd.
Address : 217B Qingfeng Rongsheng Venture Capital Bldg Road Shanglin
Community Yuanling St Futian Shenzhen CHINA 518048 518000
Manufacturer : Jiangmenshi Liansheng Wujindianqi Co., Ltd
Address : FL 4, Building 3, FL1-3, Building 4, No. 411 Xihuan Road,
Pengjiang District, Jiangmen City, Guangdong Province, China
Made in Chine
Package Contents
- Heater x1
- User Manual x1
- Accessories Bag x1
- Package of screws x1
Product Diagram
- Name : Infrared Electric
- Heater Model : UEH520
- Rated Voltage : AC 120V
- Rated Frequency : 60HZ
- Rated Power : 1500W
- N.W.: 3.4 KG / 7.5lbs
- G.W.: 4 KG / 8lbs
- Product Size :24.9×31.7×84.2cm/9.8×12.5×33.1inch
- Package size :88 x15x21 cm/31.9×5.9×8.3inch
Introduction
PLEASE READ ALL THE INSTRUCTIONS BEFORE OPERATING THIS HEATER.
WARNING
IF THE DIRECTIONS IN THIS MANUAL ARE NOT FOLLOWED, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER HEATING APPLIANCE.
ANY REQUIRED SERVICE OTHER THAN MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
Safety Awareness
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precaution should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following
-
Read all instructions before installing or using this heater.
-
This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
-
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
-
DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
-
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
-
DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
-
To disconnect heater, turn controls off, then remove plug from outlet.
-
Connect to properly grounded outlets only.
-
DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
-
To prevent a possible fire, DO NOT block air intakes or exhaust in anv manner
-
A heater has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint, or flammable liquids are used or stored.
-
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to person.
-
Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
-
Always unplug the heater when not in use. To disconnect from the power supply, grip the plug and unplug from the power socket. Never pull by the cable.
-
DO NOT use this heater in conjunction with a timer device or any other device which facilitates unattended switch on.
-
The power cable must be fully unwound before use.
-
If the supply cable is damaged, it must be replaced by the manufacture, its service agent or similarly qualified person in order to avoid a hazard.
-
This product is not designed for use by persons (including children) who have reduced physical, sensory or mental capacities or persons with no experience or knowledge. Unless they are instructed and supervised in the use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they DO NOT play with appliance.
-
Make sure the heater is supplied by the branch-circuit fitted with one 20 amperes over current protection.
-
DO NOT place the heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by the heater. 22. Check your heater cord and plug connections. A loose fitting outlet can cause the plug to overheat or cause a fire. Be sure plug fits tight in the outlet.
-
Check frequently during use to make sure plug and outlet are not hot. If hot, discontinue using heater and have outlet replaced by a qualified electrician
Note : Heaters draw more current than small appliances, overheating of the outlet may occur even if it has not occurred with the other appliances. -
Risk of fire – DO NOT operate without base attached.
-
The heater should not be operated unless the extending guard (see item 4 in part list) is in place. Risk of fire -DO NOT use if the extending guard has been deformed.
-
DO NOT use on soft surface, like a bed, where openings may become blocked.
-
Never plug the appliance into the socket with wet hands.
SAVE THESE INSTRUCTIONS
Parts
- Heater (x1)
- Handle (x1)
- Base Assembly (x1)
- M4X12 Screw (x6)
- Extending Guard (x1)
- M4X40 Screw (x2)
Installation
Installation Precaution
- The heaters should always be installed upright and should always only use the base provided.
- Remove all packing material before installation. DO NOT forget to remove the foam that protecting the tube (inserted in the front grid).
Installation Steps
Step 1 : Put the heater into the base assembly and fasten it with
screws.
- Heater (x1) Base Assembly (×1)
- M4X40 Screw(x2) Step 2 : Fixed the handle on the heater with screws.
- Handle (×1)
- M4X12 Screw (×2) Step 3 : Install the extending guard with screws.
- Extending Guard (x1)
- M4X12 Screw (x4)
Grounding Instruction
This heater is for use on 120 volts. The cord has a plug as shown at A in
Figure below. An adapter as shown at C is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The green grounding lug
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot
grounded receptacle is available.
Operating Instructions
Operation Panel
Operating Steps
- Place the heater on a flat, hard floor and make sure the tip-over switch on the bottom is connected.
- Insert the power cord plug into a grounded outlet, be sure plug fits tightly in the outlet.
- Rotate the knob to turn on, and adjust the heat level (Low/High).
- Now, adjust your distance and enjoy the heat from the infrared electric heater.
- Rotate the knob back to the off position to turn off the heater.
Note
- Placing the heater on carpets, lawns, or decks with gaps may leave the tip-over switch on the bottom of the heater disconnected, preventing the heater from turning on.
- If you tilt or lift the heater while it is running, it will shut off for safety.
- If the heater is overheated, the overheat protection will be activated, the infrared tube will not light up, unplug the power cord, and wait 5-10 minutes before the thermostat resets.
Maintenance Instructions
Warning
- Before cleaning, unplug from the power supply and wait a few minutes to cool down.
- This heater almost need no maintenance. However, when the heater builds up heavy dirt, use a soft cloth to wipe it off.
- All other servicing should be performed by qualified service personnel.
Storage
When you intend not to use this heater for a long time, you can totally
store it indoor location, which out of reach by children or disassemble it to
put into the package box.
- Unplug from the socket outlet, allowing cool down.
- Carefully disassemble extending guard and the base assembly by removing the screws as shown in the Installation figures.
- Carefully fold the power supply cord and fix it with a cable tie.
- Put the heater and all assemblies, including screws in the package box, and then store it in dry location, which away from sunshine and out of reach by children.
- Next time when use, totally assemble as the installation instruction before use.
Troubleshooting
The heater won’t turn on and the infrared tube don’t light up.| Check to
make sure that the power cord is tightly plugged into the outlet.
Make sure the heater is placed on a level and hard surface, and the bottom
tip-over switch is connected.
The heater is overheating, let it cool down before using it again.
The knob fell off.| It doesn’t matter, just align the knob with the knob
shaft and press down.
There are slight “ka” sounds during heating up and cooling.| It is normal,
caused by thermal expansion and contraction of the metal casing.
There is a slight smell when the heater is turned on.| This is normal and will
disappear after a few times of use.
The glass tube broke when the package was received.| Contact Customer
Support.
Received the package and found missing accessories.| Contact Customer
Support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>