BITTY BOOMERS 2 Inch Speaker Instruction Manual
- June 4, 2024
- BITTY BOOMERS
Table of Contents
BITTY BOOMERS 2 Inch Speaker
QUICK START GUIDE
- Turn ON/OFF by pressing the Button for 3 seconds.
- If the speaker makes a beeping sound, this means the speaker needs to be charged.
- The Button can also be used to take photos from your smartphone when the smartphone’s camera app is running.
- Each speaker comes with a lanyard which can be placed through an indention/hole on top of the speaker. Location varies depending on the design.
PAIRING SPEAKER WITH BLUETOOTH-ENABLED DEVICE
- Turn ON by pressing the Button for 3 seconds.
- A blue LED light will light up and then flash quickly, indicating it is in pairing mode.
- In your device’s Bluetooth menu, locate and select “Bitty Boomer”
- A tone will sound when the pairing is complete.
PAIRING 2 SPEAKERS TOGETHER
- Make sure no “Bitty Boomer” speakers are currently connected to your device. If so, disconnect in device’s Bluetooth settings.
- Power on each speaker one at a time.
- Double click the Button on the 2nd speaker. You will hear a chirping sound, then the opposite speaker will make a short connect sound. (If you do not hear connect sound, double click the opposite speaker Button).
CONNECTING TO MULTIPLE DEVICES
- Only 1 device can be connected within range.
- To connect a different device in the same range you must first disconnect “Bitty Boomer” from the currently connected device.
CHARGING INTERNAL BATTERY
Insert the Micro USB end of the charging cable into the speaker port located on the back of the speaker. Plug the USB end of the charging cable into a USB computer port or USB plug/adapter. Once fully charged the LED indicator light will turn off.
PRODUCT SPECIFICATIONS
- POWER RATING: PO 1X3N
- TRANSMITTING FREQUENCY: 20HZ-20KHZ
- THD: <1%
- S/N: >80DB
- SPEAKER PARAMETER: 3W
- BATTERY: 3.7V/300mAH
- BLUETOOTH VERSION: V5.3
Warning: To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture (including swimming pools or objects filled with liquids, such as vases or drinks). Warning: Your speaker has an internal rechargeable battery. Improper usage may result in the speaker becoming hot, ignite, or bust and cause injury if exposed to conditions of abuse.
Important Safety Instructions
-
Always read safety and
operation instructions before use. Retain instructions for later reference. -
For indoor use only. Do not expose the speaker to liquid, moisture or humidity.
-
Do not use abrasive cleaners to clean the speaker casing as they may damage the finish. Liquid cleaners can also get inside the speaker and damage internal parts. A Simple cloth to wipe away dirt and other particles will do the job nicely. Always unplug the unit before cleaning.
-
Do not expose the speaker to extremely high or low temperatures.
-
Keep the unit away from direct sunlight.
-
Do not attempt to open or modify the speaker in any way as it does not contain any serviceable parts.
-
Please store the speaker in a dry place that is free from extreme temperatures and dust.
-
Always operate the speaker on a flat and level surface.
-
If the unit is plugged in, always operate away from small children or small animals as they may play with the power cord.
-
Do not leave a fully charged battery connected to a charger, overcharging may shorten its lifetime.
-
Always dispose of the packaging and speaker in accordance with local regulations and in a responsible manner.
LIMITED WARRANTY:
Bitty Boomers/ Fabrique Innovations Inc. warrants to the first consumer purchaser that this product, when shipped in its original container to the original purchaser, will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect or replace the defective product or part thereof at no charge to the purchaser for parts or labor for the time periods described. I his warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below nor to any product the exterior of which has been damaged or defaced which has been subjected to misuse, abnormal service or handing or which has been altered or modified in design or construction. The limited warranty described herein is in addition to applicable law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OPF ORIGINAL PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on the behalf of Bitty Boomers/ Fabrique Innovations Inc. The warranties described herein shall be the sole and exclusive warranties granted by Bitty Boomers/ Fabrique Innovations Inc. and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Bitty Boomers/ Fabrique Innovations Inc. to the purchaser with respect to the product and shall constitute full satisfaction of al claims, whether based on contract negligence, strict lability or otherwise. In no event shall Bitty Boomers/ Fabrique Innovations Inc. be liable or in any way responsible for any incidental of consequential economic or proper damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Fabrique Innovations Inc./ Bitty Boomers is under license. Other trademarks and trade names re those of their respective owners.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2021, Fabrique Innovations Inc., 2021 Bitty Boomers, 2021 Bigger Bitty Boomers Distributed by Fabrique Innovations Inc., New York, NY 10018 800-511-1595 All Rights Reserved Made In China.
FCC ID: 2AR17BB5 IC: 24431-BB5 CMIITID:2020DP3626 QDID: 172491 DECLARATION ID:
DO56623
For Questions or Technical Support Please Contact:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>