Wingo WGTT66 Digital Calendar Wireless Charging Instruction Manual

: June 15, 2024
: WINGO

Table of Contents

[New Experience] Digital Calendar Wireless Charging
WGT-T66
- series new products
instruction manual

[New Experience] Digital Calendar Wireless Charging

WGT-T66

series new products

instruction manual

Love in heart • Wireless care

Product Description

The product integrates a perpetual calendar (time, date, temperature), wireless charging, and night light. It’s perfect for working from home.

Product usage

One end of the data line Type-C is inserted into the input port of the product, and the other end is connected to the charging head. The product can be used normally.

Function introduction

(1) Wireless charging function. The mobile phone that supports wireless charging can be charged by placing it at the product LOGO. The green light of wireless charging indicator is off in standby mode. The wireless charging indicator light is steady green under the charging state. The wireless charging indicator green light is turned off under saturation state. The wireless charging indicator light flashes quickly when the FOD foreign object alarms.
(2) Night light. Touch the button to adjust the brightness of the night light.
(3) Time function. The product can display time, date, temperature and realize 12/24 hour conversion.
(4) Alarm clock and snooze function. Daily alarm and snooze function can be turned on at the same time.
(5) Ambient temperature display function. The temperature measurement range is 00.0 °C-300.0 °C or 320 F-1220 F, and the temperature can be converted between Celsius/Fahrenheit.

Operation

(1) Night light
Touch the button to adjust the brightness of the night light: Touch once to display 30% brightness, touch twice to display 50% brightness, Touch three times to display 100% brightness, touch four times to turn off the night light.

(2) Alarm clock display function
Long press the “-” button to turn on and off the alarm clock.

(3) Time and date settings
The normal state is displayed after power-on. Press the “M” key to enter the time and date settings, and set the hour, minute, alarm hour, minute, year, month, and day in the following order. Use the “UP/DOWN” keys to complete the setting. No operation default 15 s exit setting.

(4) Alarm and snooze Settings
Short press the “UP” button to switch the time in standby mode„ switch between 12 h system and 24 h system, the default is 24 h system, long press the “UP” button for two seconds to turn the alarm on or off, and the default alarm is off.

(5) Temperature conversion
Short press the “DOWN” button to switch the temperature in standby mode, switch between Fahrenheit and Celsius, the default is Celsius.

Electrical parameters

Input voltage

| 5V/3A, 9V/2A, 12V/1.5A
---|---
Output power|

15W, 10W, 7.5W, 5W

Interface|

Type-C

Support QC protocol and PD protocol

Precautions

Prec autions

Remove the Mylar sheet under the button battery and install the button battery for power supply before using the product.

(2) Avoid violent shocks and falls.

Keep away from direct sunlight, high temperature and humidity.

(4) Avoid using liquid with corrosive chemical composition and hard cloth to wipe the surface of the product.

IMPORTANT SAFETY INSTRUCTIONS

Before Using the unit, please read the user manual carefully.

Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F (100°C) may cause explosion.
Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
Do not expose the wireless charger to rain or snow.
Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc huding interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one 01 more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be insta led and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.