SAMOON TECHNOLOGY T6 Ride Recorder User Manual
- June 15, 2024
- SAMOON TECHNOLOGY
Table of Contents
SAMOON TECHNOLOGY T6 Ride Recorder
Packing list
Introduction
Installation
- Step-o1
- Insert TFcard, unscrew the locking cap on the host insert the cable, align and tighten it
- step-02:
- Unscrew the right refletor as the picture shown
- step-03:
- Insert the mirror’s screw into the recorder holder, adjust the direction, tight it, and tie the cable
- Step-04:
- Open the hood, find the flasher’s wires, and connect with the recorder to complete the installation.
- Note: the regular voltage iS 12V.
Connection
- step-I: scan the below QR code, download, and install. Or download”6 Viidure” in the APP store and Install.
- step-2 Open App, click”Connect Wifi” &connect
- step-3 Set up after connecting successfully
SET-UP Preview
- manufacture inforSET-UP Preview: motion
- WI-Fl: TL-T6- XXXX
- Code: 12345678
Function
- on & off: After connecting to the power, when the vehicle starts, the recorder will be on and recorded. After the vehicle is turned off, the recorder is turned off.
- Record: When the vehicle is turned on, the smart recorder will automatically turn on and start recording, and it will automatically stop recording when the vehicle is turned off.
- Keypad: Press and hold for 3s to turn on and off, and press and hold for 8s to reset the machine
Indicator
- Blue Flashing: Wi-Fi on
- Blue Steady: Wi-Fi connect
- Blue Off: Wi-Fi off
- Red flashing: video recording
- Red Steady: Device Standby
Vl.o.o
Please read this manual carefully before use and keep it safe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>