INTEX PureSpa Plus 6 Person Portable Inflatable Hot Tub Installation Guide
- June 15, 2024
- INTEX
Table of Contents
INTEX PureSpa Plus 6 Person Portable Inflatable Hot Tub Installation Guide
Inflation and Water Filling Instructions:
-
Fill the headrest partially (half) with water first from a faucet using the included funnel. Never add hot water! The weight of the water helps to keep the headrest in place during use.
Then continue filling up the remaining with air to the desired firmness. Inflate the headrest using a manual or foot air pump only. CAUTION: Do not over inflate or use high pressure air compressor to inflate. -
Ensure the valve is securely closed and recessed (press valve cap down). Place the headrest over the selected spa wall edge area.
-
Adjust the firmness by releasing or adding more air.
Maintenance and Storage:
- For cleaning use only mild soapy solution. Do not use any chemicals.
- Open the valve cap and insert the funnel.
- Drain and/or deflate the headrest completely. Close the valve cap back.
- Clean and air dry thoroughly before folding.
- Lay the headrest flat, fold loosely to avoid sharp bends, corners and creases which can damage the headrest.
- The original packaging can be used for storage. Store in a dry, cool storage location.
- In case of repairs, use only common PVC repair glue and patches.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>