CONTECH LIGHTING LVR316R-SA StopAire Low Voltage Recessed Remodel Downlight User Guide

: June 15, 2024
: CONTECH LIGHTING

Table of Contents

CONTECH LIGHTING LVR316R-SA StopAire Low Voltage Recessed Remodel
Product Information
Product Usage Instructions
Speciﬁcations/Features
Warranty
Labels/Usage
Ordering Information
Trims for 3″ Low Voltage Recessed Housings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONTECH LIGHTING LVR316R-SA StopAire Low Voltage Recessed Remodel

Downlight

Product Information

Specifications

Product Name: LVR316R-SA
Product Type: Low Voltage Recessed Remodel Downlight
Housing Only
Low silhouette design for remodeling applications in solid or suspended ceilings
Narrow fixture design for fast installation through ceiling opening
Retractable mounting clips allow easy installation into existing ceiling
Adjustable mounting clips for different ceiling thicknesses from 1/2 to 1 inch
Trims: Baffle, multiplier, wall wash, accent, and adjustable trim options available c CSAus Certified Suitable for damp locations
Conforms to Washington State Energy Code (WSEC) for low air filtration
Tested in accordance with ASTM E283 (2.0 CFM or less)
Warranty: Full one (1) year replacement guarantee after date of purchase

Product Usage Instructions

Housing Installation

Ensure the power is turned off before starting the installation process.
Choose the appropriate location on the ceiling for the downlight.
Measure and mark the ceiling opening according to the specified dimensions.
Cut the ceiling opening using a suitable cutting tool.
Insert the housing into the ceiling opening, making sure it fits securely.
Adjust the retractable mounting clips to match the ceiling thickness.
Lock the fixture in place by engaging the retractable mounting clips.

Trim Installation
Note: Refer to the Trims for 3 Low Voltage Recessed Housings spec sheet for specific trim options and details.

Select the desired trim option based on your application requirements.
Align the trim with the housing and press it firmly into place.
Ensure the trim is securely attached to the housing.

FAQ

Q: Can I use MR16 lamps with integral glass lenses?
A: No, the product is designed to be used with open MR16 lamps only, not with MR16 lamps that contain an integral glass lens.
Q: Is the product suitable for wet locations?
A: The product is not specifically rated for wet locations, but it is suitable for damp locations.
Q: What is the warranty period for this product?
A: The product is covered by ConTech’s full one (1) year replacement guarantee after the date of purchase.
Q: Are there any specific certifications for this product?
A: Yes, the product is cCSAus certified.
Q: Can I adjust the mounting clips to fit different ceiling thicknesses?
A: Yes, the retractable mounting clips can be adjusted to accommodate ceiling thicknesses from 1/2 to 1 inch.

LVR316R-SA
StopAire Low Voltage Recessed Remodel Downlight; Housing Only

Speciﬁcations/Features

Housing/Mounting

Low silhouette design for remodeling applications in solid or suspended ceilings.
Narrow ﬁxture design for fast installation through ceiling opening minimizes remodeling mess.
Retractable mounting clips allow easy installation into existing ceiling. Fixture is easily installed through ceiling opening.
Retractable mounting clips lock ﬁxture in place and adjust for different ceiling thicknesses from 1/2″ to 1″.

Lamp/Electrical

(1) 10W Max. or (1) 50W Max., 12V MR16, GU5.3 base.
Class H “in-line” magnetic transformer is prewired and thermally protected. 120V in/12V out. Conveniently mounted to end of J-Box and is replaceable to simplify future maintenance.
(6) 1/2″ knock outs and spring latch access plates in J-box.
Lamp housing is removeable through ceiling aperture for access to J-Box. Can be used with low voltage, magnetic dimming controls for optimal control of illumination.
Ceramic terminal block socket.

Trims
Bafﬂe, multiplier, wall wash, accent and adjustable trim options available to suit a broad range of applications. See “Trims for 3″ Low Voltage Recessed Housings” spec sheet for details.

Warranty

This ﬁxture is covered by ConTech’s full one (1) year replacement guarantee after date of purchase.

Labels/Usage

cCSAus Certiﬁed. Suitable for damp locations.
Conforms to Washington State Energy Code (WSEC) for low air ﬁltration. Tested in accordance with ASTM E283 (2.0 CFM or less).

Ordering Information

$CONTECH-LIGHTING-LVR316R-SA-StopAire-Low-Voltage-Recessed-Remodel- Downlight-01 $3$$

Trims for 3″ Low Voltage Recessed Housings

All CTR3 Series Trims are cCSAus Certiﬁed and Suitable for Damp Locations; only Shower Trims are Wet Location Listed
All Trims have White Trim ﬁnish unless speciﬁed
For Trims designed for use with MR16 Lamps, ConTech Lighting provides a clear, Tempered Safety Glass Lens that should only be used with open MR16 Lamps; not with MR16 Lamps that contain an integral Glass Lens
If use of MR16 with Front Glass is required, remove the factory provided Safety Lens; Lens should also be removed when using MR16 LED Lamps
Consult factory for LED Lamp compatibility

CTR301 Series Adjustable Baffle
15° Vertical swing, 45mm lens. Trim can hold up to two (2) lenses with stepped lens holder (included). Insert 45mm lens on lower level of lamp seat, insert 50mm lens onto higher level.
CTR301-WHT – Adjustable White Bafﬂe
CTR303N Series Slotted Wall Wash
Internal 50° swing adjustment (25° from Nadir), external 358° rotation. Slot aperture permits maximum beam area adjustment for either wall wash or concealed accent lighting effects. Black interior surface.
CTR303N-P – White Slotted Wall Wash
CTR307 Series
Adjustable Pin Spot
Deep bafﬂe for maximum lamp concealment. May be used as a pin spot style downlight or an adjustable accent light. 35° Vertical adjustment. 45mm Lens. Trim can hold up to two (2) lenses with stepped lens holder (included). Insert 45mm lens on lower level of lamp seat, Insert 50mm lens onto higher level.
CTR307-B – Black Bafﬂe, Black Trim $CONTECH-LIGHTING-LVR316R-SA-StopAire-Low-Voltage-Recessed-Remodel-Downlight-01 $4$$
CTR302 Series
Adjustable Multiplier
37° Vertical adjustment, 45mm lens. Trim can hold up to two (2) lenses with stepped lens holder (included). Insert 45mm lens on lower level of lamp seat, instert 50mm lens onto higher level.
CTR302-B-BLKN – Black Reﬂector, Black Trim
CTR302-P-CLR – Clear Reﬂector, White Trim
CTR302-P-BLK – Black Reﬂector, White Trim
CTR302-P-WHT – White Reﬂector, White Trim
CTR302STCLR – Clear Reﬂector, Brushed Stainless Steel Trim
CTR305 Series Pin Spot
Downlight Only, 50mm Lens. Trim can hold up to two (2) lenses with stepped lens holder (included). Insert 45mm lens on lower level of lamp seat, instert 50mm lens onto higher level.
CTR305-CLR – Clear Cut-Off Reﬂector, White Trim
CTR325 Series Fully Adjustable
Die cast, fully adjustable, round lampholder and backplate. Easy relamping with twist-off front retaining ring. Unsurpassed aiming ﬂexibility: 87° vertical, 359° rotational. 50mm lens.
CTR325-B – Black
CTR325-P – White $CONTECH-LIGHTING-LVR316R-SA-StopAire-Low-Voltage-Recessed-Remodel-Downlight-01 $5$$
CTR312 Flat Glass
Etched Glass for light diffusion.
CTR312-P – Flat Glass, White Trim
CTR311FR
Frosted Flat Glass Shower Light
Shower light trim, double neoprene gasketed. cULus Listed for wet location.
CTR311FR-P – Frosted Flat Glass Shower Light, White Trim
CTR324 Series Fully Adjustable
Unsurpassed aiming ﬂexibility: 87° vertical, 359° rotational. Front access, spring latch lamp retainer ring, black ﬁnish (optional white retainer reign available: 1623/24 WHITE, ordered separately). Exclusive stainless ﬂat springs insure ﬁrm, close-to-ceiling mounting. Accepts only one 47mm lens; if louver is required (FA-16 45MM), remove safety lens and use front glass MR16 lamp.
CTR324-P – White