Allite WA1 USB C Watch Earphone Charger User Manual

Allite WA1 USB C Watch Earphone Charger

Specifications

• Product Name: Allite USB C Watch Earphone Charger
• Brand: Allite
• Model No.: WA
• Size: L x W x H.mm
• Weight:
• Material: C USB-C
• Power Input: V A
• Total Output: W(Max)
• Warranty: Warranty for months, excluding non-human-made/natural disasters
• Manufacturer: OneMore Co., Ltd.
• Made in: China

Product Usage Instructions

Connecting the Charger
Connect the Type-C end of the charger to a compatible device that supports W charging.

Charging the Apple Watch
To charge your Apple Watch, follow these steps:

1. Place the Apple Watch on the white panel of the charger.
2. Ensure that the magnetic alignment between the watch and charger is correct.
3. The side light on the charger module will turn white, indicating that the charging is in progress.
4. Once the watch is fully charged, you can remove it from the charger.

Charging Earphones

You can also charge your earphones using this charger. Here’show:

1. Place the earphones on the beige panel of the charger.
2. Ensure that the magnetic alignment between the earphones and charger is correct.
3. The side light on the charger module will turn white, indicating that the charging is in progress.
4. Once the earphones are fully charged, you can remove them from the charger.

FAQ

Can I use this charger with other devices?
No, this charger is specifically designed for Apple Watch and compatible earphones.

Is this charger safe to use?
Yes, as long as you follow the safety precautions mentioned in the user manual, such as avoiding disassembly or modification of the product and not charging it near a heat source.

What is the warranty period for this charger?
The charger comes with a warranty for a specified number of months, excluding damages caused by non-human-made/natural disasters.

Specifications

• Product Name : Allite USB C Watch Earphone Charger
• Brand: Allite
• Model No. : WAl
• Size : L58 x W48 x H13.98mm
• Weight: 41 g
• Material: PC
• USB-C Power Input: 5V= 1A
• Total Output : 5W(Max)
• Warranty: Warranty for 12 months, excluding non-human-made/natural disasters.
• Manufacturer: OneMore Co., Ltd.
• Made in China
• Addr. : No.254, Ruibei Rd., Qianzhen Dist.,Kaohsiung City, Taiwan 806
• UBN: 50930640
• Tel. : 0905-400-200

Notice

1. Avoid disassembly or modification of the product.
2. Do not put into the fire, water, to avoid short circuit or electric leakage.
3. Do not store the product in humid or corrosive environment.
4. Do not charge the product near the heat source.
5. Prevent liquids, especially water, from entering the product to avoid damage.
6. Ensure children do not treat the product as a toy to prevent accidents.
7. Product use maximum ambient temperature is 35 ° C.
8. The product is designed for safe use in tropical climates.
9. Do not self-repair this product, except as instructed in the manual.

Product List

• Allite USB C Watch Earphone Charger x 1
• User’ s Manual x 1

Made for :

• Apple Watch Series 9
• Apple Watch Series 8
• Apple Watch Series 7
• Apple Watch Series 6
• Apple Watch Series 5
• Apple Watch Series 4
• Apple Watch Series 3
• Apple Watch Series 2
• Apple Watch Series 1
• Apple Watch (1st generation)
• Apple Watch SE
• Apple Watch Ultra 2
• Apple Watch Ultra

Trademark Statement
Apple Watch and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “¡Phone” is used in Japan with a license from Aiphone K.K.

Instructions

1. Connect Type-C to a 5W-capable device.
2. Charge the watch on the white panel or earphones on the beige panel for magnetic alignment.
3. The module’s side light turns white during normal charging.
4. Remove the module after full charge.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio  or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Caution:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>