Wigfar B0CN2MKP37 Open Ear Headphones User Manual
- June 15, 2024
- Wigfar
Table of Contents
Wigfar B0CN2MKP37 Open Ear Headphones
PARAMETER CONFIGURATION
- Matching name: NM01
- Bluetooth version: BT5.3
- Bluetooth profile: IFP V1.7; HSP V1.2; A2DP V1.3; AVRCP V1.6
- RF carrier frequency: 2402MHz-2480MHz
- Charging current: headphone DC5V-40MA charging case DC5V-300mA
- Battery capacity: charging case 200mAh, headphones 30mAh
- Charging time: about 1 hour for headphones and about 2 hours for charging cases
- Listening time: about 5h
- Bluetooth receiving distance: ≤15 meters (barrier-free)
PACKAGING ACCESSORIES
- Pairing Connection
- Take out the headphones from both ends of the charging box, the earphones will automatically turn on, automatically Pairing, the Bluetooth name “NM01” appears in the Bluetooth search, click to connect
- Power On
- When charging in the compartment, pick up the earphones to automatically power on, pair, and connect back
- Power Off
- Put earphones back into the compartment to charge and automatically power off
- Answer The Phone
- tap on the left/right channel
- Hang Up The Phone
- tap on the left/right channel
- Refuse To Answer The Phone
- Press the left/right channel for 2 seconds
- Pause/Play The Song
- tap on the left/right channel
- Volume Increase
- Tap the right channel twice (automatically switch with the main and secondary machine)
- Volume Reduction
- touch the left channel twice (automatically switching with the main and secondary machine)
- Previous Song
- taps on the right channel
- Next Song
- touches in the left channel
- Summon Siri
- Left/Right channel long press for 3 seconds
- Manual Switch
- Left/right channel long press for 5 seconds
Charging Case
-
Put the headphones in the charging case. The red light of the headphones is always on, and the display screens of the charging case are on. It shows the power of the charging compartment and the left and right ears.
When the headphones are charging: the peripheral dazzling light breaths flashes; after fully charged, the red light of the headphones goes off. -
Charge the case: the display is bright, the single digits flash, and the full charge shows “OK”
-
When the charging case is low, it displays 00 and the
display is off. (Please note that you must use a 5V1A charging cable to charge the case or the charging cable delivered at the time of purchase)
Precautions
- Please do not treat these earphones violently, do not squeeze heavy objects, and stay away from high temperatures and high humidity.
- Stay away from WIFI, routers, and other high-frequency transmission equipment, which will affect the signal reception of the machine, resulting in sound jams and disconnection.
- Please use this product in an effective environment (400 inches), and there should be no physical obstruction (such as walls, etc.) directly between Bluetooth devices and headphones.
- If the product is not used for a long time, the headphones and case need to be charged (within a month).
- If there is a failure, please restart the headphones and follow the detailed 1/2 point (to avoid causing misoperation)
After-sales Service:
- Log in to your Amazon account
- Open your purchased orders
- Click ” contact us ” under the purchased product Support Email: support@wigfar.com
CONGRATULATIONS!
You are invited to Activate Your Lifetime Warranty Lifetime Warranty Now and Get a Gift
- Wigfar.com/warranty
- Just register your product online at Wigtar.com/warranty
- scan the QR code
Documents / Resources
|
Wigfar B0CN2MKP37 Open Ear
Headphones
[pdf] User Manual
B0CN2MKP37, B0CDPVW4V4, B0CN2MKP37 Open Ear Headphones, Open Ear Headphones,
Ear Headphones, Headphones
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>