SONTHIN MK-258 Intelligent Atmosphere Lamp User Guide
- June 15, 2024
- SONTHIN
Table of Contents
Intelligent Atmosphere Lamp
Dear customers,
Hello, this is a multifunctional integrated product with a variety of light
effects, Bluetooth audio, wireless charging, clock, and white noise sleep aid.
Please read the safety precautions in detail.
Ensure the wire connection is correct and firm to avoid accidents such as short
circuit damage to components and burning out the controller.
Please check whether the input power supply of the controller (be sure to
match the power supply voltage of the controller) meets the product
requirements.
Please do not repair by yourself. If in doubt, contact the supplier.
Product Information
Applicable adapter specifications: with PD,QC fast charge; output:18W
Input power: 100-240v~ 50/60HZ0.55A
Output power:18W：5V 3A,9V 2A,12V 5A
Wireless charging power：5W-7.5W-10W-15W
Audio playback power:：3W
LED power：6.5W Light mode: 256 types
Weight: ：750g Size:235mmx207mmx114mm
Material: abs+pc+ metal
Product accessories: adapter power, data cable, user manual
Product Overview
Product Operating Instructions
Light and music control module
| Power on/Off key: short press for power on or off function; long press to
forcibly clear WIFI device information and enter the distribution network
function(Bluetooth ID: BT-258).
---|---
| Brightness key: Short press to set the brightness of the lamp effect, the
default setting is 100, a total of 4 dimming levels (1 off, 2 low brightness,
3 medium brightness, 4 high brightness)
| Light effect key: short press to switch the light effect mode;
| White noise key: short press to play white noise, long press to switch white
noise directory (sleep aid/nature/environment)
| Next key: In Bluetooth/white noise mode, short press to the next song
function, long press to increase the volume function
| Previous key: In Bluetooth/white noise mode, short press to the previous
function, long press to reduce the volume function
| Next key: In Bluetooth/white noise mode, short press to the next song
function, long press to increase the volume function
Clock and Alarm Control Module
(Clock automatically updates and calibrates when connected to the mobile app)
| Alarm setting key:1.In clock mode, long press this key for 2 seconds to
enter the alarm setting mode. The LED display will display “AL” and the alarm
clock symbol will blink at the same time. Press this key to enter the alarm
setting mode. Press the confirm key to enter “Hour” with flash, then press the
up or down key to select. Press the confirm key to enter “minutes” with flash,
then press the up or down key to select. Short press this key again or
wait 5 seconds to exit the alarm setting mode and the alarm symbol will be
steady on. 2.Long press this key to exit the time setting.Press and hold the
snooze button to clear the currently set alarm, and the alarm icon will turn
off.
---|---
| Clock setting key:1.In the clock mode, press this key to enter the time
setting mode. Press the confirm key to enter “Hour” with flash, then press the
up or down key to select.Press the confirm key to enter “minutes” with flash,
then press the up or down key to select.Short Press this key again or wait 5
seconds to exit the time setting mode;
PREV| Scroll down button: In clock or alarm mode, press for scrolling
down
NEXT| Scroll up button: in clock or alarm mode, short press for
scrolling up
SNOOZE| “Snooze Button”: When the alarm starts ringing, pressing any key
will turn off the light and alarm sound. The snooze period lasts 9 minutes,
after which
the alarm will sound again. This snooze function can be used three times
before it is
Wireless Charging Instructions
Wireless Charging Adapter Model
Apple Phone:iphone 15/15pro/15plus/15pro Max/14/14pro/14plus/14pro
Max/13/13pro/13pro Max/12/12pro/12pro Max
Samsung Phone: Galaxy S22/s22 Ultra/s10/s10+/s9/s9+/s8/s8+/s7/s7 Edge/s6
Edges Plus/note 10/9/8/7/5
Any Android Phone That Supports Qi Wireless Charging
Headphones:any Headset Model That Supports Wireless Charging
White Noise Sleep Aid Configuration
White noise for sleep is beneficial for helping you fall asleep and relaxing your emotions. There are three types of white noise: sleep aid, natural, and environmental :
- Simply press the white noise button briefly to activate the white noise function, and use the previous and next track buttons to select your preferred type of white noise.
- Switch to warm and gentle lighting using the light effect switch button.
Alarm & Wake-Up Light Configuration
Alarm Clock Setting Method:
- Set via the product buttons (see product operating instructions page).
- Set through the mobile app and turn on the wake-up light switch (as shown in the image).
https://smartapp.tuya.com/smartlife
Add Device to the APP
Before adding the product, please confirm that the WIFI and Bluetooth of the
mobile phone have been turned on, and the lamp is correctly connected before
switching on the power supply.
- When the light is in the fast flashing state of the distribution network, the mobile phone logs in the APP. Enter the product adding interface through the add device in the upper right corner of the APP home page or the middle of the page.
- Through the manual add function of the product add interface, select the lamp (WIFI) category in the lighting category to complete the operation.
APP Control Interface（Switch on and off/Light efficiency/Sleep/Alarm clock） Turn on Bluetooth in the phone Settings, search for device BT-258, connect device successfully, and play music in the APP interface.
Click Light effect to Click can turn off the light efficiency and the multimedia Scene interface (18 opThree color streamer tions) : Scenes can be switched at will.
Music Rhythm (3 options)、RGB
Click Sleep to enter the white noiseWhite Noise
Click on the alarm clock to access the alarm and wake-up light
settings.
Wake-up time, alarm, light settings.
About the unexpected power outage and redistribution network
- Unexpected power failure: APP displays device connection failure and there is a reminder pop-up window. After reconnecting the power, the product restores the Settings as before. After returning to the home page of the APP, pull down the blank area to refresh, and the device will automatically connect.
- Re-distribution network: If need to disconnect the connection between the APP and the product, you can remove the device through the APP or press the physical button of the product for 5 seconds to force the product into the distribution network state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>