msi USB4 PD100W Expansion Card Installation Guide
- June 15, 2024
- MSI
Table of Contents
msi USB4 PD100W Expansion Card
Specifications:
- Chipset : Supports up to 40Gbps with USB 4.0 devices
- External connector : Supports up to 20V/5A, 100W power charging for USB1
- Interface : Supports up to 9V/3A, 27W power charging for USB2
- Operating system : Compatible with various operating systems
- Form factor : PCIe 4.0 x4 slot
- Package contents : USB4 PD100W Expansion card, screw
Product Usage Instructions
Step 1: Installing the USB4 PD100W card
- Make sure you have a PCIe 4.0 x4 slot supported by the PCH available on your motherboard.
- Insert the USB4 PD100W card into the PCIe 4.0 x4 slot on your motherboard.
- Connect the JUSB1 and JU4_1 connectors of the USB4 PD100W card to the corresponding connectors on your motherboard.
- Connect the PCIE_PWR1 connector of the USB4 PD100W card to the power supply.
- Secure the USB4 PD100W card in the case bay using the provided screw.
NOTE: The DisplayPort signal input by DP1 can only be output via USB1, and input by DP2 can only be output via USB2. When using only one DisplayPort input, it is recommended to use DP1 as the priority input.
Specifications
| Chipset | Asmedia® 4242 USB4 Host Controller |
|---|---|
| External connector | ∙ 2x USB4 (USB-C) ports |
▪ Supports up to 40Gbps with USB 4.0 devices
▪ Supports up to 20V/5A, 100W power charging for USB1
▪ Supports up to 9V/3A, 27W power charging for USB2
▪ Supports USB4 Display (need to connect the DisplayPort output port on the motherboard or discrete graphics card to the DisplayPort input
port on the USB4 PD100W card or both Type C ports only support USB4 data transmission.)
▪ Compatible with Thunderblot™ 3.0 specification
∙ 2x DisplayPort Input ports
▪ DisplayPort 1.4 specification
∙ 1x 18-pin U4 header
∙ 1x USB 2.0 header
∙ 1x 6-pin power connector
Interface| ∙ PCIe 4.0 x4 (depends on motherboard supportive slot)
Operating system| ∙ Windows 11 22H2 and later
Form factor| ∙ 5.2 inch x 4.11 inch (13.2 cm x 10.4 cm)
__
Package contents
| ∙ 1x USB4 PD100W card
∙ 1x U4 header cable
∙ 1x USB 2.0 cable
Installing the USB4 PD100W card
- Insert the USB4 PD100W card into the PCIe 4.0 x4 slot supported by the PCH.
- Connect JUSB1 and JU4_1 connectors of the USB4 PD100W card to the motherboard. And connect the PCIE_PWR1 to the power supply.
- Use the screw to secure the USB4 PD100W card in the case bay.
⚠ NOTE
- The DisplayPort signal input by DP1 can only be output via USB1, and input by DP2 can only be output via USB2.
- When use only one DisplayPort input, it is recommended to use DP1 as the priority input.
Frequently Asked Questions
What is the maximum power charging capability of USB4 PD100W?
USB4 PD100W supports up to 20V/5A, which allows for 100W power charging for USB1.
Can I use USB4 PD100W with older USB devices?
Yes, USB4 PD100W is backward compatible with USB 3.0 and USB 2.0 devices.
Is the USB4 PD100W card compatible with Mac operating systems?
Yes, the USB4 PD100W card is compatible with various operating systems, including Mac OS.
Can I use multiple USB4 PD100W cards in my system?
Yes, you can install multiple USB4 PD100W cards if your motherboard has available PCIe slots.