VOLKANO V94352 24 Inch Wall Mounted Grab Bar Installation Guide
- June 15, 2024
- Volkano
Table of Contents
VOLKANO V94352 24 Inch Wall Mounted Grab Bar
Product Information
Specifications
- Model #:
- V94352
- V94353
- V94354
- V94355
- V94356
- V94358
- Description: 24 Crater Grab Bar
- Finish:
- Matte White
- Chrome
- Brushed Nickel
- Matte Black
- Polished Nickel PVD
- Brushed Gold
- Weight (lb): 3.25
- Dimensions (mm): 600 x 75 x 70 (WxHxD)
- Dimensions (Inches): 23.5 x 3 x 2.75 (WxHxD)
- Metal Type: Brass
- Warranty: 2 Years
- Care & Maintenance: A periodic wash using warm water and a soft cloth will retain the high quality finish of your Volkano product for many years to come. ON NO ACCOUNT should any household bleaches, detergents, abrasive polishes, steel wool or other cleaning agents be used on this item.
- Load Capacity: The grab bars can support loads of up to 440lbs if properly installed in compliance with ADA requirements.
- Safety Warning: Grab bars are only as strong as the anchors and walls to which they are attached and must be installed correctly for the load they intend to support. Anchors provided are not suitable for all applications. Appropriate anchors and backing must be used in accordance with local building codes.
Installation Guide
- Identify the desired location for the grab bar installation.
- Ensure that the wall is suitable for installation and can support the intended load.
- Using a stud finder, locate the studs on the wall and mark their positions.
- Position the grab bar against the wall, aligning it with the marked stud locations.
- Using a pencil, mark the screw hole locations on the wall through the grab bar mounting holes.
- Drill pilot holes at the marked screw hole locations using an appropriate drill bit size.
- Insert the provided screws into the pilot holes and tighten them securely using a screwdriver or drill.
- Verify that the grab bar is securely attached to the wall and can support weight before use.
Frequently Asked Questions
-
What is the weight capacity of the grab bars?
The grab bars can support loads of up to 440lbs if properly installed in compliance with ADA requirements. -
How should I clean and maintain the grab bar?
A periodic wash using warm water and a soft cloth will retain the high-quality finish of your Volkano product for many years to come. Do not use any household bleaches, detergents, abrasive polishes, steel wool, or other cleaning agents on this item. -
Can I use the provided anchors for all applications?
No, the anchors provided may not be suitable for all applications. It is important to use appropriate anchors and backing by local building codes. -
What is the warranty period for the grab bar?
The grab bar comes with a warranty period of 2 years. -
How do I contact customer support?
You can contact our customer support team at 877-757-8930 or visit our website at www.icobath.com for further assistance.
Parts Included
| Parts Included | QTY |
|---|---|
| A – Grab Bar | 1 |
| B – Screw | 6 |
Description
Model #| Description| Finish| Weight (lb)| WxHxD
(mm)| WxHxD (Inches)| Metal Type
---|---|---|---|---|---|---
V94352| 24” Crater Grab Bar| Matte White| 3.25| 600 x 75 x 70| 23.5 x 3 x
2.75| Brass
V94353| 24” Crater Grab Bar| Chrome| 3.25| 600 x 75 x 70| 23.5 x 3 x 2.75|
Brass
V94354| 24” Crater Grab Bar| Brushed Nickel| 3.25| 600 x 75 x 70| 23.5 x 3 x
2.75| Brass
V94355| 24” Crater Grab Bar| Matte Black| 3.25| 600 x 75 x 70| 23.5 x 3 x
2.75| Brass
V94356| 24” Crater Grab Bar| Polished Nickel| 3.25| 600 x 75 x 70| 23.5 x 3 x
2.75| Brass
V94358| 24” Crater Grab Bar| PVD Brushed Gold| 3.25| 600 x 75 x 70| 23.5 x 3 x
2.75| Brass
Warranty: 2 Years
Care & Maintenance
A periodic wash using warm water and a soft cloth will retain the high-quality finish of your Volkano product for many years to come. ON NO ACCOUNT should any household bleaches, detergents, abrasive polishes, steel wool or other cleaning agents be used on this item.
DIMENSION
ICO grab bars can support loads of up to 440lbs if properly installed in
compliance with ADA requirements.
Safety Warning: Grab bars are only as strong as the anchors and walls to
which they are attached, and must be installed correctly for the load they
intend to support. Anchors provided are not suitable for all applications.
Appropriate anchors and backing must be used in accordance with local building
codes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>