Baolira A6 Retro Bluetooth Speaker User Manual
- June 15, 2024
- Baolira
Table of Contents
Baolira A6 Retro Bluetooth Speaker
Preface
Thank you for purchasing and using our company’s products. In order to allow you to operate this machine as quickly and easily as possible, please read this manual carefully before you start using it.
This unit is a stylishly designed portable wireless BT speaker. This machine supports BT protocol, supports smart phones, tablet computers, notebooks and other devices with BT audio function, which allows you to completely get rid of the shackles of cable, and enjoy the fun of music freely. It also supports TF card,U disk and mobile phones without BT function., Laptop, MP3, MP4 and other equipment audio input playback.
Precautions
Do not hit the main unit seriously.
- Do not touch chemicals of benzene, thinner, etc.
- Please do not use near strong magnetic fields and electric fields.
- Please avoid direct light spot heating appliances.
- Do not disassemble, repair or modify it yourself.
- When riding a bicycle or driving a car or a motorcycle, do not use the player to avoid danger.
- Do not listen for a long time at a large volume to avoid adverse effects on your hearing.
- Do not clean the machine with clean water, please clean the surface of the machine with a slightly moistened cloth.
- When using low voltage, the sound may be distorted and please charge it in time. Please disconnect the power when not in use for a longtime.
- BT function is compatible with common smart phones, tablet computers, etc., but some functions may not be supported depending on the device or application you are using.
Wireless mode
- Rotate left lo turn on, turn right lo turn off, and turn left and right to adjust the volume up and down. After turning on, the speaker emits a power-on prompt sound, the blue light of the bluetooth indicator flashes quickly, and enters the bluetooth mode, and the speaker emits a bluetooth mode prompt tone.
- The blue light flashes in quickly and enters the pairing state. At this time, open the BT device and search for the “AS20” device name to confirm the connection. If a password is required, enter (0000). After the connection is successful, the blue light is always on and the speaker emits a beep. The blue light flashes slowly during music playback. The paired BT device first turns on the BT, and then turns on the speaker to automatically connect back.
- Support BT hands-free call function. You can answer the phone while listening to music via BT, continue to play the music after you hang up the phone, short press the pause/radio button to answer/end the call, long press to reject the call, double click to redial the previous call.
TF card/U disk mode
- Insert a TF card or U disk under bl mode to automatically enter TF card or U disk lo play. If a TF card or U disk is inserted into the speaker, ii will directly enter TF card or U disk playback mode after power on.
- During playback, the blue indicator light flashes slowly, and the pause blue light is always on.
“Line in” mode
- In the power-on state, insert the “line in” line and enter the “line in” mode automatically.
- In “line in” mode, the blue indicator light flashes slowly.
“FM”mode
- Pull the radio cable to receive the radio signal.
- In the power-on state, long press the “II/M” key to enter the FM radio mode (voice prompt: FM mode); (Note for the first use: After entering the radio mode, press the “11/M” key, the machine will automatically search for all the radios that can be searched nearby. The channel will be automatically saved for the next use, the process will take about 2 minutes).
- Switch the up and down buttons to select the channel to listen to.
Charge
- Insert the USB cable into the speaker and connect to a 5V charger or computer to charge the speaker’s built-in battery.
- The “charging” indicator light is red when charging, and the red light is off when ii is fully charged.
The default boot volume in all modes of this machine is 60% of the total
volume. When the battery voltage is lower than 3.2V, the speaker will
automatically detect and emit a low battery warning tone. When the battery
voltage is lower than 3.0V, the speaker will emit a tone and automatically
shut down.
List of key functions
List of key functions
| Serial number | Button Name | Mode |
|---|---|---|
| Bluetooth | TF card /U disk | Line in |
the Phone**
1| | Press to play/ pause/ Tap and press three times to switch Chinese and
English prompt sound| Long press mode switch /short press to play /pause| Long
press mode switch /short press to mute| Long press mode switch /knob to
adjust| When a call comes in, short press to answer/hang up, long double click
the last number to redial
2| | Press the top button|
/
|
/
|
/
|
/
3| | Short press the next tune|
/
|
/
|
/
|
/
4| | Turn left to start| Turn it off to the right| Turn the volume to the left| Rotate the volume to the right to decrease|
/
Technical specifications
- BT version: version 5.1
- Output: BT TF U disk AUX output
- Charging source interface: USB interface
- Speaker power: 3Q*5W
- Rated power: 5w•1
- Frequency response: 1 50Hz-20KHz
- Noise ratio: 80dB
- BT output distance: 8-10 m (without obstacles)
- Power input: DC 5V 1200MA
Part Name
|
Toxic and harmful substances or elements
---|---
Pb
| Hg| Cd| Cr (VI)| PBB|
PBDE
Circuit board|
✕
|
◯
| ◯| ◯| ◯|
◯
Battery|
✕
|
◯
| ◯| ◯| ◯|
◯
Case|
◯
| ◯| ◯| ◯| ◯|
◯
◯ : It means that the content of this toxic and hazardous substance in all
homogeneous materials of this part is below the limit requirement of SJ/T
11363-2006.
✕ : Indicates that the content of the toxic and hazardous substance in at
least one of the homogeneous materials of the part exceeds the limit
requirement specified in SJ/T 11363-2006; the parts marked with “X” in the
above table cannot be replaced due to technical reasons. Gradually improve.