Footreal B0BDPXR2V4 Mini Wi-Fi Projector User Manual

Footreal B0BDPXR2V4 Mini Wi-Fi Projector User Manual

Important Note: Please read the user manual carefully before use and keep it for future use.

IMPORTANT SAFETY PRECAUTIONS

Important: In order to get the best viewing effect, it’s suggested that you use the product in a dark room.

Warning: Following safety instructions can sustain product’s lifespan and prevent it from firing or electric shock, so please read them carefully and pay attention to all warnings.

• Do not install it in a place with poor ventilation.

• Do not install it in a hot or damp place.
  
  Note: In order to maintain the performance and reliability of projector, please leave at least 30cm of space around the projector.
  Note: The projector’s light is very bright, so please do not look at it directly or point its light to your eyes in case of causing visual damage.

• Do not block its ventilation holes (Intake or Exhaust).

• Do not install it in a dusty or smoky place.

• Do not install it near to the temperature/smoke sensor, since it might make the sensor fail to work.

• Do not install it in a position directly blown by air condition, otherwise it might be malfunctioned because of the water & vapour condensation or high temperature.
  

PACKING LIST

Note: Please check whether the accessories are complete after opening the package. If it’s not complete, please contact customer service for a replacement.

PRODUCT INTRODUCTION

Note: Due to the design improvement, the appearance/screen printing/characters of the remote control might be somewhat different from the real product, please in kind prevail.

NOTES
Be cautious when using the remote control. Do not drop it, trample on it, or spill any liquid into it’s body.
Do not put the remote control near to any heat source.
Do not expose the remote control under sunlight.
Do not put the remote control in a damp place.

INSTALLATION AND DEBUGGING

Installation Ways

Method 1: Put it horizontally

Method 2: Hang it with Mount

Instructions (Method 1)

Referential Projection Distance

Turn Off Safely

Press the switch button on operation panel or remote control, and turn off the device according to the system prompts.

PRODUCT SPECIFICATIONS

PROJECTION SETTINGS (SCREEN-SHARING SETTINGS)

Phone Projection/Screen-sharing Settings

Android

1. Turn on Wi-Fi on your Android device and connect it to the network.
2. Enter into phone settings and select “Screen-sharing”, click it and find the device to connect.

Note: For different phone brands, the names of “screen-sharing” are different.

Huawei: Wireless Projection/Multi-screen Interaction
Xiaomi: Wireless Display
Sony: Screen Mirroring
Samsung: Screen Sharing/Screen Mirroring/Allshare Cast Smart View

IOS

Wired Projection/Screen-sharing

1. Connect projector to phone with the USB data cable.
2. Select trust to allow this program to be used on your phone.

Wireless Projection/Screen-sharing

1. Connect iPhone/iPad to projector’s Wi-Fi. WiFi name: “PROJECTOR-xxxxxx” WiFi Password: 12345678

2. Open phone’s browser and input “192.168.49.1” , and select (WiFi AP)—>(Scan) to connect your own Wi-Fi.
   Note: This connection needs 3-5 minutes.

3. Return to phone’s main interface, and find the device and connect it via the “AirPlay”.

Note: It’s unable to play video directly via Netflix and some apps after phone projection, but they’re available if you use Fire TV Stick or Google Chromecast to connect your device to projector.

MENU SETTING

Get the best viewing effect with the most appropriate settings. You could set some relative parameters according to following steps

1. Press the menu button on projector or remote control if you want to set.
2. You could set the parameter of the “Picture” and “Sound”. Press on operation panel and select the range you want to set.

Note: When the projector is hung on the ceiling or in a system of rear projection, please change the projection mode.

OSD Language English
Restore Factory Default
OSD Duration Off
Flip 3
Focus 4
Software Update(USB)

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

CORRECT DISPOSAL OF THIS PRODUCT

 ( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>