Haier HSW59F18EIPT Refrigerator User Manual

REFRIGERATOR
User Manual

HSW59F18EIMM
HSW59F18EIPT

HSW59F18EIPT Refrigerator

• Please read this manual carefully before using refrigerator.
• Retain it for future reference.

WARNING: Risk of fire/flammable material
The symbol indicates there is a risk of fire since flammable materials are used. Take care to avoid causing a fire by in giting flammable material.

Thank you
Thank you for purchasing a Haier Product.
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings.

Accessories
Check the accessories and literature in accordance with this list:

Safety information

WARNING – Important Safety information
NOTICE-General information and tips
Environmental information

Disposal
**** Help protect the environment and human health. Put the packaging in applicable containers to recycle it. Help to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with this symbol with the household waste.
Return the product to your local recycling facility or contact your municipal office.

WARNING!
Risk of injury or suffocation!
Refrigerants and gases must be disposed of professionally. Ensure that the tubing of the refrigerant circuit is not damaged before being properly disposed of. Disconnect the appliance from the mains supply. Cut off the mains cable and dispose of it. Remove the trays and drawers as well as the door catch and seals, to prevent children and pets to get closed in the appliance.

Before switching on the appliance for the first time read the following safety hints!:
WARNING!
Before first use

► Make sure there is no transport damage.
► Remove all packaging and keep out of children’s reach.
► Wait at least two hours before installing the appliance in order to ensure the refrigerant circuit is fully efficient.
► Handle the appliance always with at least two persons because it is heavy.
Installation
► The appliance should be placed in a well-ventilated place. Ensure a space of at least 10 cm above and around the appliance.
► Never place the appliance in a damp area or location where it might be splashed with water. Clean and dry water splashes and stains with a soft clean cloth.
► Do not install the appliance in direct sunlight or in the near of heat sources(e.g. stoves, heaters).
► Install and level the appliance in an area suitable for its size and use.
► Keep ventilation openings in the appliance or in the in-built structure clear of obstruction.
► Make sure that the electrical information on the rating plate agrees with the power supply. If it does not, contact an electrician.
► The appliance is operated by a 220-240 VAC/50 Hz power supply. Abnormal voltage fluctuation may cause the appliance to fail to start, or damage to the temperature control or compressor, or there may be an abnormal noise when operating. In such case, an automatic regulator shall be mounted.
► Do not use multi-plug adapters and extension cables.
► Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
► Ensure that the power cable is not trapped by the refrigerator. Do not step on the power cable.
► Use a separate earthed socket for the power supply which is easy accessible.
The appliance must be earthed.
Only for UK: The appliance’s power cable is fitted with 3-cord (grounding) plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount the third pin (grounding). After the appliance is installed, the plug should be accessible.
► Do not damage the refrigerant circuit.
Daily use
► This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
► Children aged from 3 to 8 years are allowed to load and unload, but not allowed to clean or install the refrigerating appliances.
► Keep away children under 3 years of age from the appliance unless they are constantly supervised.
► Children shall not play with the appliance.
► If cool gas or other inflammable gas is leaking in the vicinity of the appliance, turn off the valve of the leaking gas, open the doors and windows and do not unplug a plug in the power cable of the refrigerator or any other appliance.
► Notice that the appliance is set for operation at a specific ambient range between 10 and 43°C. The appliance may not work properly if it is left for a long period at a temperature above or below the indicated range.
► Do not place unstable articles (heavy objects, containers filled with water) on top of the refrigerator, to ovoid personal injury caused by falling or electric shock caused by contact with water.
► Do not pull on the door shelves. The door may be pulled slant, the bottle rack, may be pulled away, or the appliance may topple.
► Open and close the doors only with the handles. The gap between the doors and between the doors and the cabinet is very narrow. Do not extend your hands in these areas to avoid pinching your fingers. Open or close the refrigerator doors only when there are no children standing within the range of door movement.
► Do not store or use inflammable, explosive or corrosive materials in the appliance or in the vicinity.
► Do not store medicines, bacteria or chemical agents in the appliance. This appliance is a household appliance. It is not recommended to store materials that require strict temperatures.
► Never store liquids in bottles or cans (besides high percentage spirits) especially carbonated beverages in the freezer, as these will burst during freezing.
► Check the condition of food if a warming in the freezer has taken place.
► Do not set unnecessarily low temperature in the refrigerator compartment. Minus temperatures may occur at high settings. Attention: Bottles can burst
► Do not touch frozen goods with wet hands (wear gloves). Especially do not eat ice lollies immediately after removal from the freezer compartment. There is the risk to freeze or the formation of frost blisters. FIRST aid: keep immediately under running cold water. Do not pull away!
► Do not touch the inside surface of the freezer storage compartment when in operation, especially with wet hands, as your hands may freeze onto the surface.
► Unplug the appliance in the event of a power interruption or before cleaning. Allow at least 7 minutes before restarting the appliance, as frequent starting may damage the compressor.
► Do not use electrical devices inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Maintenance / cleaning
► Make sure children are supervised if they carry out cleaning and maintenance.
► Disconnect the appliance from the electrical supply before undertaking any routine maintenance. Allow at least 5 minutes before restarting the appliance, as frequent starting may damage the compressor.
► Hold the plug, not the cable, when unplugging the appliance.
► Do not clean the appliance with hard brushes, wire brushes, detergent powder, petrol, amyl acetate, acetone and similar organic solutions, acid or alkaline solutions. Please clean with special refrigerator detergent to avoid damage.
► Do not scrape off frost and ice with sharp objects. Do not use sprays, electric heaters like heater, hair dryer, steam cleaners or other sources of heat in order to avoid damage to the plastic parts.
► Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
► If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
► Do not try to repair, disassemble or modify the appliance by yourself. In case of repair please contact our customer service.
► Eliminate the dust on the back of the unit at least once in the year to avoid hazard by fire, as well as increased energy consumption.
► Do not spray or flush the appliance during cleaning.
► Do not use water spray or steam to clean the appliance.
► Do not clean the cold glass shelves with hot water. Sudden temperature change may cause the glass to break.

Refrigerant gas information
WARNING!
The appliance contains the flammable refrigerant ISOBUTANE (R600a). Make sure the refrigerant circuit is not damaged during transportation or installation. Leaking refrigerant may cause eye injuries or ignite. If a damage has occurred, keep away open fire sources, thoroughly ventilate the room, do not plug or unplug the power cords of the appliance or any other appliance. Inform the customer service.
In case of eyes get into contact with the refrigerant, rinse immediately it under running water and call immediately the eye specialist.

Intended use

This appliance is intended for cooling and freezing food. It has been designed exclusively for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments as well as in bed-and-breakfast and catering business. It is not intended for commercial or industrial use.
Changes or modifications to the device are not allowed. Unintended use may cause hazards and loss of warranty claims.

Standards and directives
This product meets the requirements of all applicable EC directives with the corresponding Harmonised standards, which provide for CE marking.

Product description

NOTICE
Due to technical changes and different models, some of the illustrations in this manual may differ from your model.

A: Freezer compartment
1 Ceiling lamp
2 Ice maker with ice container
3 Water and ice dispenser
4 Glass shelves
5 Bottle holder
6 Drawers| B: Refrigerator compartment
7 Ceiling lamp
8 Bottle holder
9 Wine rack
10 Glass shelves
11 Wet zone cover plate
12 Drawers
---|---

Control panel

Keys:
A Auto Set function /3Sec.Wi-Fi
B Holiday function
C Zone selection/3Sec.Filter Reset
D1 Decrease temperature
D2 Increase temperature
E Super-Freeze function/3Sec.Ice on/ off
F Super-Cool function
G Panel lock selector
H1 Water intake function selection
H2 Cubed ice function selector
H3 Crushed ice function selector

Indicators:
a1 Auto Set status
a2 Wi-Fi function
b Holiday mode
c Zone selection status
c1 Fridge compartment
c2 Freezer compartment
c3 Filter change status
d Temperature display
e1 Super-Freeze mode
e2 Ice Maker status
f Super-Cool mode
g Panel lock
h1 Water intake function
h2 Cubed ice function
h3 Crushed ice function

Use

NOTICE
Initial power-on
When the refrigerator is powered on for the first time, the display will light up, and the refrigeration will be automatically set to 5°C, and the refrigeration will be automatically set to 18°C.

Display lock/unlocker
Automatic locking:
When the refrigerated door and the refrigerated door are closed and there is no key operation within 30 seconds, the display screen will automatically go out and lock.

Manual locking
When the display screen is unlocked, press the “G” button for 3 seconds, the buzzer rings, the icon “g” lights up, and the display screen is locked

Adjust the temperature for refrigerator
When the display screen is unlocked, press the “C” temperature zone selection button once, the buzzer will ring, the indicator icon “c1” of the cold storage temperature zone will light up, and the cold storage temperature display will flash double eight to enter the cold storage adjustment mode.
Each time the “D1” temperature adjustment button is pressed, the buzzer will ring, and the set gear of the cold storage room will be reduced by 1. The display will be in the order of “-9°C->-8°C->-7°C->-6°C->-5°C->-4°C->-3°C->-2°C->-1°C”, and the minimum will be reduced to 1°C

Adjust the temperature for refrigerator
Each time the “D2” temperature adjustment button is pressed, the buzzer will sound, and the set gear of the cold storage room will be increased by 1. The display will be in the order of “-1°C->-8°C->-7°C->-6°C->-5°C->-4°C->-3->-2->-1”, and the maximum temperature will rise to 9°C.

Adjust the temperature of freezing chamber
When the display screen is unlocked, press the “C” temperature zone selection button once, the buzzer will ring, the freezing temperature zone indicator icon “c2” will light up, and the freezing temperature display will flash double eight to enter the freezing adjustment mode.
Each time the “D1” temperature adjustment button is pressed, the buzzer will ring, and the set gear of the freezer will be reduced by 1. The display will be in the order of “-14°C->-15°C->-16°C->-17°C->-18°C->-19°C->-20->-21->-22->-23->-24”, and the lowest will be reduced to 24°C

Each time the “D2” temperature adjustment button is pressed, the buzzer will ring, and the set gear of the freezer will be increased by 1. The display will be in the order of “-24°C->-23°C->-22°C->-21°C->-20°C->-19°C->-18->-17->-16->-15->-14″, and the maximum will rise to – 14. 20->-21->-22->-23->-24”, and the lowest will be reduced to 14°C

Intelligent function
When the display screen is unlocked, press the “A” smart key once, the buzzer will ring, the smart indicator icon “a1” will light up, and the smart function of the refrigerator will be turned on. When the smart indicator is on, press the “A” smart button, the buzzer will ring, the smart indicator “a1” will go out, and the smart function of the refrigerator will be turned off.

In the intelligent state, the refrigeration or freezer temperature cannot be adjusted.
If the temperature adjustment button “D1” or “D2” is pressed, the intelligent indicator icon “a1” flashes, accompanied by a prompt tone, indicating that this operation cannot be performed.
Note: In the intelligent state, due to different control methods, if the “quick cooling”, “quick freezing” and “holiday” functions are set, the intelligent indicator icon “a1” will go out and the intelligent function will exit automatically.

Holiday function
The holiday function is designed to make it convenient for you not to use the cold room for a long time. When the holiday function is on, the cold room is normally controlled, and the cold room is automatically set to 17°C, so that your cold room will not produce odor due to high temperature, and can save energy consumption.
When the display screen is unlocked, press the “B” holiday button once, the buzzer rings, the holiday indicator icon “b” lights up, and the refrigerator holiday function is turned on. When the holiday indicator is on, press the “B” holiday button, the buzzer rings, the holiday indicator “b” goes out, and the refrigerator holiday function is off.

NOTICE
In the holiday function state, the temperature of the cold storage room cannot be adjusted. If the temperature adjustment button “D1” or “D2” is pressed, the holiday indicator “b” will flash, accompanied by a prompt tone, indicating that this operation cannot be performed.
Before entering the holiday function, please empty the refrigerator to avoid food deterioration in the refrigerator Under the holiday function status, the “smart” or “fast cooling” function cannot be turned on at the same time due to different control methods. If the “smart” or “fast cooling” function is set, the holiday function

Quick cooling function
When the display screen is unlocked, press the “F” quick-cooling button once, the buzzer rings, the quick-cooling indicator icon “f” lights up, and the quick-cooling function of the refrigerator is turned on. When the quick- cooling indicator is on, press the “F” quick-cooling button, the buzzer will ring, the quick-cooling indicator “f” will go out, and the quick-cooling function of the refrigerator will be turned off.

NOTICE

1. Enter the fast cooling function on state. After the fast cooling function runs to the set conditions, the refrigerator will automatically switch to the fast cooling function off state. If you want to exit manually, you can press the “F” quick cooling button to exit.
2. In the status of quick-cooling function, the temperature of the refrigerator cannot be adjusted. If the temperature adjustment button “D1” or “D2” is pressed, the quick-cooling indicator icon “f” will flash, accompanied by a prompt tone, indicating that this operation cannot be performed.
3. In the status of quick-cooling function, the “smart” or “holiday” function cannot be turned on at the same time due to different controls. If the “smart” or “holiday” function is set, the indicator “f” of quick-cooling function will go out and the quick-cooling function will automatically exit.

Super-Frz function
When the display screen is unlocked, press the “E” quick-freezing button once, the buzzer rings, the quick-freezing indicator icon “e1” lights up, and the refrigerator quick-freezing function is turned on. When the quick-freezing indicator is on, press the “E” quick-freezing button, the buzzer will ring, the quick-freezing indicator “el” will go out, and the quick-freezing function of the refrigerator will be turned off.

NOTICE

1. Enter the quick-freezing function on state. After the quick-freezing function runs to the set conditions, the refrigerator will automatically switch to the quick-freezing function off state.
   If you want to exit  manually, you can press the “E” quick-cooling button to exit.

2. Under the status of quick-freezing function, the freezing chamber temperature cannot be adjusted. If the temperature adjustment button “D1” or “D2” is pressed, the quick-freezing indicator icon “e1” flashes, accompanied by a prompt tone, indicating that this operation cannot be performed.

3. Under the status of quick-freezing function, the “intelligent” function cannot be opened at the same time due to different controls. If the “intelligent” function is set, the indicator icon „e1″ of quick-freezing function will go out and the quick-freezing function will automatically exit.

Filter function
When the refrigerator has been running for 6 months, the filter replacement icon “c3” lights up, and the blue bar indicator light under the display panel flashes, prompting the user to replace a new filter When the filter is replaced, please press and hold the “C” button for 3 seconds, the buzzer will ring once, the filter replacement reminder will be canceled, the filter replacement icon “c3” will go out, and the blue bar indicator light will always be on.

Ice making mode
When the display screen is unlocked, press and hold the “E” quick-freezing button for 3 seconds, the buzzer rings, the ice making indicator icon “e2” lights up, and the ice making function of the refrigerator is turned on. When the ice-making indicator is on, press and hold the “E” quick-freezing button for 3 seconds, the buzzer will ring, the quick-freezing indicator “e2” will go out, and the ice-making function of the refrigerator will be turned off.

Filter function
Water intake function
When the display screen is unlocked, press the “H1” water intake function button once, the buzzer will ring, the water intake indicator icon “h1” will light up, and the water intake function of the refrigerator will start. When the water intake indicator is on, press the “H1” water intake function button, the buzzer will ring, the water intake indicator “h1” will go out, and the water intake function of the refrigerator will be turned off.

NOTICE

1. When the water intake exceeds the water intake warning time (150s), the buzzer will start to alarm (Dingdong), and when the water intake protection time (180s) is exceeded, the water intake protection status will be triggered;
2. After the protection state is triggered, the water intake protection recovery time (200s) will not be discharged by pressing the water intake microswitch; After the recovery time of water intake protection, press the water intake microswitch to resume water intake. Under the protection status, press the distributor press button to make a prompt sound (Ding Dong Dong).
3. Count back for 10 minutes from the beginning of water intake. If the cumulative water intake exceeds 5 minutes within this 10 minutes, the water intake protection will be forced to stop for 10 minutes, and the water intake will be resumed after 10 minutes. If the accumulated water intake does not exceed 5min within 10min, the timing will be reset, and the timing will be restarted after the water intake again. This cycle control. Under the protection status, press the distributor press button to make a prompt sound (Ding Dong Dong).

Rounding ice function
When the display screen is unlocked, press the “H2” rounding ice function button once, the buzzer will ring, the rounding ice indicator icon “h2” will light up, and the refrigerator rounding ice function will be turned on. When the ice rounding indicator is on, press the “H2” ice rounding function button, the buzzer will ring, the ice rounding indicator “h2” will go out, and the ice rounding function of the refrigerator will be off.

Ice crushing function
When the display screen is unlocked, press the “H3” rounding ice function button once, the buzzer will ring, the rounding ice indicator icon “h3” will light up, and the refrigerator rounding ice function will start. When the ice rounding indicator is on, press the “H3” ice rounding function button once, the buzzer will ring, the ice rounding indicator “H3” will go out, and the ice rounding function of the refrigerator will be turned off.

NOTICE

1. Under Super-Freeze state, the freezer temperature cannot be adjusted. If either button “D” (Temperature adjustment button “-“) or button “E” (Temperature adjustment button “+”) is pressed to adjust the temperature of freezer, the indicator “f2” (Freezer indicator) will flash with a prompt sound to indicate that this operation cannot be carried out.
2. Super-Freeze function is designed to keep nutrition value of frozen food, it will be freeze food in the shortest time. If large quantities of frozen food are to be frozen at one time, it is recommended that users take food that cannot be frozen out from the S-zone, turn the S-Zone temperature below -18°C, to use it as a freezer Meanwhile, Super-Freeze function should be set 24h in advance, to make the freezer and S-zone own relatively low temperature and put food in. At this time, the freezing speed of the freezer and S-zone is improved, food can be frozen quickly, the nutrition of food is effectively kept, and the storage becomes quite convenient.

Adjustable shelves

1. The height of the shelves can be adjusted to fit your storage needs.
2. To relocate a shelf, remove it first by uplifting its hind edge 1 and pulling it out 2.
3. To reinstall it, put it on the lugs on both sides and push it to the most rearward position until the rear of the shelf is fixed inside the slots in the sides

NOTICE
Ensure that all ends of a shelf are level.
My Zone drawer

1. In this compartment the humidity level is lower than fridge compartment This drawer is suitable to store dry fruit and other dry food with low water content like butter, fats and oil or chocolate.

Removable door racks/bottle holder

1. The door racks can be removed for cleaning:
2. Place hands on each side of the rack, lift it upwards 1 and pull it out 2.
3. In order to insert the door rack, the above steps are carried out in reverse order

Equipment

OPTIONAL: OK-temperature indicator
The OK-temperature indicator can be used to determine temperatures below +4°C. Gradually reduce the temperature if the sign does not indicate “OK”.

NOTICE
When the appliance is switched on, it may take up to 12 hours for the correct temperatures to be reached.

Removable drawer
To remove the drawer out, pull out to the maximum extent 1, lift and remove 2.
In order to insert the drawer, the above steps are carried out in reverse order.

Ice container
Stopping the production of ice If no ice or water is needed over a long period of time, the valve between the water supply and the appliance can be turned off. The ice box should be cleaned. dried and put back into the appliance to prevent the emergence of odours. Grip both side hangles.

Removable drawer
To remove the drawer out, pull out to the maximum extent 1, lift and remove 2.
In order to insert the drawer, the above steps arcarried out in reverse order.
Reinstalling the ice container (Fig.7.4.3)
To reinstall the ice container, the U – shaped bracket behind the ice container (1 in Fig.7.4.3) must be aligned with the corresponding metal structure. Follow the steps from 7.4.2 in the reverse order.

Notice: ice box
Moisture can condense and freeze the ice box in place.

1. Cut the pipe into two pieces with the required length to connect the filter (A) with the appliance (B1) and the water tap (B2) (Fig.10.5-1). Make sure to get a square cut by using a sharp knife.

2. Insert pipe (B1) approx.12 mm deep into the mounting fixture of the water fiter (A) (Fig.10.5-2). Take care to install the fiter in the correct direction. The dart shows the direction of water flow.

3. Secure the pipe with a locking clip (C) according to Fig.10.5-3.

4. Repeat step 2 and 3 with the pipe (B2) on the other side of the filter

5. Connect the end of pipe (B2) to one of the adapters “D” or “E and F” which suits to the water main (Fig.10.5-4).
   

6. Remove the plug in the v alve at the back of appliance) Fig.10.5-5).

7. Connect the end of B1 to the valve at the back of the appliance(Fig.10.5-6).

8. Open the water tab to check if the system is leak free and flush the pipe.

WARNING!
Ensure that the connections are always firm, dry and leak free.

Make sure the hose is never crushed, kinked, or twisted.

10.6 Aligning the appliance
The appliance should be placed on a flat and solid surface.
1. Tit the appliance slightly backwards (Fig. 10.6).
2. Set the feet to the desired level. Make sure the distance to the wall on the hinge sides is at le a st 10 cm.
3. The stability can be checked by alternately bumping on the diagonals. The slightly swaying should be the same in both directions. Otherwise the frame can warp possible leaking door seals are the result.
A low tendency to the rear facilitates the closing of the doors.
10.7 Fine tuning of the doors If the doors are still not in one level after levelling the doors by the feet, this mismatch can be remedied by turning the hinge lifting shaft at the right bottom corner of refrigerating door with a spanner(Fig.10.7)

Clockwise turn lifting shaft with spanner to lower door height (Fig.10.7-1).
Antic lock wise turn lifting shaft with spanner to lift door height (Fig.10.7-2).

10.9 Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate to the rating plate.
the power socket is earthed and no multi – plug or extension.
the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
To avoid risks a damaged power cord must be replaced by the customer service (

WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see warranty card)

10.10 Removing and installing the doors
In the event that you need to remove the appliance doors, please follow the door removal and installation instructions below (Fig.10.10). see warranty card).

WARNING!
Before any operation, deactivate the appliance and disconnect the mains plug from the mains socket.
Block the water supply.
The appliance is heavy. Always handle with at least two persons.
Do not tilt the appliance more than 45 or place it horizontally on the ground.
Before any operation, deactivate the appliance and disconnect the mains plug from the mains socket.
Block the water supply.
The appliance is heavy. Always handle with at least two persons.
Do not tilt the appliance more than 45 or place it horizontally on the ground.
The door may fall over and hurt people, or get damaged during these steps, please pay more attention when reproving and installing doors.

1. Release the left side of two water couplers on the front left corner at the bottom of appliance: press and hold in the collar as shown and remove the water pipe.(Fig.10.10-1).
   

2. Undo the hinge cover screw and remove the cover (Fig.10.10-2). When removing the freezer door, disconnect all wires except for the grounding wire.

3. Undo the screws holding the upper hinge in position and then remove the hinge (Fig. 10.10-3).
   

4. Lift the door to remove it (Fig.10.10-4). When removing the freezer door, lift it high enough to pull out the water connection from the bottom of the appliance.

5. Refit the door by reversing the removal steps. Ensure that the grounding cable will be fixed by the screw.

6. Refit the water connection.

Care and cleaning

WARNING!
Disconnect the appliance from the power supply before cleaning.
Cleaning
Clean the appliance when only little or no food is stored.
The appliance should be cleaned every four weeks for good maintenance and to prevent bad stored food odors.

WARNING!
► Do not clean the appliance with hard brushes, wire brushes, detergent powder, petrol, amyl acetate, acetone and similar organic solutions, acid or alkaline solutions.
Please clean with special refrigerator detergent to avoid damage.
► Do not spray or flush the appliance during cleaning.
► Do not use water spray or steam to clean the appliance.
► Do not clean the cold glass shelves with hot water. Sudden temperature change may cause the glass to break.
► Do not touch the inside surface of the freezer storage compartment, especially with wet hands, as your hands may freeze onto the surface.
► In case of heating check the condition of frozen goods.

► Always keep the door gasket clean.
► Clean the inside and housing of the appliance with a sponge dampened in warm water and neutral detergent.
► 1. Please scrub the interior and exterior of the refrigerator, including door sealing, door rack, glass shelves, boxes and so on, with a soft towel or sponge dipped in warm water (you may add neutral detergent into the warm water).
► 2. If there is liquid spilled, remove all the contaminated parts, directly rinse with the flow water, dry and place it back into the fridge.
► 3. If there is spilled cream (such as the cream, melting ice cream), please remove all the contaminated parts, put into the warm water with about 40 °C for some time, then rinse with the flow water, dry and place it back into the fridge.
► 4. In case some small part or component gets stuck inside of the fridge (between shelves or drawers), use small soft brush to release it. If you could not reach the part, please contact Haier service
► Rinse and dry with soft cloth.
► Do not clean any of the parts of the appliance in a dishwasher.
► Allow at least 5 minutes before restarting the appliance as frequent starting may damage the compressor.
Defrosting
The defrosting of the refrigerator and the freezer compartment are done automatically; no manual operation is needed.

Replacing the LED-lamps

WARNING!
Do not replace the LED lamp yourself, it must only be replaced by either the manufacturer or the authorised service agent.

The lamps adopts LED as its light source, featuring low energy consumption and long service life. If there is any abnormality, please contact the customer service. See CUSTOMER SERVICE.
Parameters of the lamps:
Refrigerator compartment:12 V max 2 W
Freezer compartment:12 V max 2 W

Non-use for a longer period
If the appliance is not used for an extended period of time, and you will not use the Holiday-function for the refrigerator:
Take out the food.
Unplug the power cord.
Clean the appliance as described above.
Keep the doors open to prevent the creation of bad odours inside.

NOTICE
Turn the appliance off only if strictly necessary.
Moving the appliance

1. Remove all food and unplug the appliance.
2. Secure shelves and other moveable parts in the fridge and the freezer with adhesive tape.
3. Do not tilt the refrigerator more than 45° to avoid damaging the refrigerating system.

WARNING!
► Do not lift the appliance by its handles.
► Never place the appliance horizontally on the ground.

Troubleshooting

Many occurring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE.

WARNING!
► Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
► Electrical equipment should be serviced only by qualified electrical experts, because improper repairs can cause considerable consequential damages.
► A damaged supply should only be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

socket.
• The appliance is in the defrosting cycle| • Connect the mains plug.
• This is normal for an automatic defrosting
The appliance runs frequently or runs for a too long period of time.| • The indoor or outdoor temperature is too high.
• The appliance has been off power for a period of time.
• A door of the appliance is not tightly closed.
• The door has been opened too frequently or for too long.
• The temperature setting for the freezer compartment is too low.
• The door gasket is dirty, worn, cracked or mismatched.
• The required air circulation is not guaranteed.| • In this case, it is normal for the appliance to run longer.
• Normally, it takes 8 to 12 hours for the appliance to cool down completely.
• Close the door/drawer and ensure the appliance is located on a level ground and there is no food or container jarring the door.
• Do not open the door/drawer too frequently.
• Set the temperature higher until a satisfactory refrigerator temperature is obtained. It takes 24 hours for the refrigerator temperature to become stable.
• Clean the door/drawer gasket or replace them by the customer service.
• Ensure adequate ventilation.
The inside of the refrigerator is dirty and/or smells.| • The inside of the refrigerator needs cleaning.
• Food of strong odour is stored in the refrigerator.| • Clean the inside of the refrigerator.
• Wrap the food thoroughly..
It is not cold enough inside the appliance.| • The temperature is set too high.
• Too warm goods has been stored.
• Too much food has been stored at one time.
• The goods are too close to each other.
• A door/drawer of the appliance is not tightly closed.
• The door/drawer has been opened too frequently or for too long.| • Reset the temperature.
• Always cool down goods before storing them.
• Always store small quantities of food.
• Leave a gap between several foods allowing air flowing.
• Close the door/drawer
• Do not open the door/drawer too frequently.
It is too cold inside the appliance.| • The temperature is set too low.
• The Super-Frz /Super Cool function is activated or is running too long.| • Reset the temperature.
• Switch off the Super Frz /Super-Cool function
Moisture formation on the inside of the
refrigerator compartment.| • The climate is too warm and too damp.
• A door/drawer of the appliance is not tightly closed.
• The door/drawer has been opened too frequently or for too long.
• Food containers or liquids are left open.| • Increase the temperature.
• Close the door/drawer
• Do not open the door/drawer too frequently.
• Let hot foods cool to room temperature and cover foods and liquids.
Moisture accumulates on the refrigerators outside surface or between the doors/door and drawer.| • The climate is too warm and too damp.
• The door is not closed tightly. The cold air in the appliance and the warm air outside it condensates.| • This is normal in damp climate and will change when the humidity decreases.
• Ensure that her door/drawer is tightly shut.
Strong ice and frost in the freezer compartment.| • The goods were not adequately packaged.
• A door/drawer of the appliance is not tightly closed.
• The door/drawer has been opened too frequently or for too long.
• The door/drawer gasket is dirty, worn, cracked or mismatched.
• Something on the inside prevents the door/drawer to close properly.| • Always pack the goods well.
• Close the door/drawer.
• Do not open the door/drawer too frequently.
• Clean the door/drawer gasket or replace them by new ones.
• Reposition the shelves, door racks, or internal containers to allow the door/drawer to close.
The sides of the cabinet and door strip get warm.| • –| • This is normal.
The appliance makes abnormal sounds.| • The appliance is not located on level ground.
• The appliance touches some object around it.| • Adjust the feet to level the appliance.
• Remove objects around the appliance.
A slight sound is to be heard similar to that of flowing water.| • –| • This is normal.
You will hear an alarm beep.| • The fridge storage compartment door is open.| • Close the door.
You will hear a faint hum.| • The anti-condensation system is working| • This prevents condensation and is normal

Power interruption
In the event of a power cut, food should remain safely cold for about 5 hours. Follow these tips during a prolonged power interruption, especially in summer:
► Open the door/drawer as few times as possible.
► Do not put additional food into the appliance during a power interruption.
► If prior notice of a power interruption is given and the interruption duration is longer than 5 hours, make some ice and put it in a container in the top of the refrigerator compartment.
► An inspection of the goods is required immediately after the interruption.
► As temperature in the refrigerator will rise during a power interruption or other failure, the storage period and edible quality of food will be reduced. Any food that defrosts should be either consumed, or cooked and refrozen (where suitable) soon afterwards in order to prevent health risks.

Memory function during power interruption
After restoration of power the appliance continues with the settings that were set before the power failure.

Installation

Unpacking

WARNING!
► The appliance is heavy. Always handle with at least two persons.
► Keep all packaging materials out of children’s reach and dispose them in an environmentally friendly manner
► Take the appliance out of the packaging.
► Remove all packaging materials.

Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can influence the temperature inside the appliance and its energy consumption. Do not install the appliance near other heat-emitting appliances (ovens, refrigerators) witnout isolation.

Space requirement
Required space when door is opened:
W1 = 1221 mm
W2=1534 mm
D1=560 mm
D2=1040 mm

Ventilaton cross-section
To achieve sufficient ventilation of the appliance for safety reasons, the information of the required ventilation cross sections must be observed.

Aigning the appliance
The appliance should be placed on a flat and solid surface.

1. Tilt the refrigerator slightly backwards.
2. Set the feet to the desired level.

Make sure the distance to the wall on the hinge side is at least 100 mm for the door to open properly.

NOTICE
For a free standing appliance: this refrigerating appliance is not intended to be used as a built-in appliance

3. The stability can be checked by alternately bumping on the diagonals. The slightly swaying should be the same in both directions. Otherwise the frame can warp; possible leaking door seals are the result. A low tendency to the rear facilitates the closing of the doors.

Fine tuning of the doors
If the doors are not in one level, this mismatch can be remedied by following:
A) Using adjustable foot
Rotate the adjustable foot according to the direction of arrow to turn up or down the foot.

NOTICE
In the future use of refrigerator, doors uneven phenomenon may occur to the weight of stored food. Then please adjust according to the above methods.

Waiting time
To the maintenance-free lubrication oil is located in the capsule of the compressor. This oil can get through the closed pipe system during slanting transport. Before connecting the appliance to the power supply you have to wait at least 2 hours so that the oil runs back into the capsule.

Electrical connection
Before each connection check if:
► power supply, socket and fusing are appropriate to the rating plate.
► the power socket is earthed and no multi-plug or extension.
► the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.

WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see warranty card).

Technical data

Product fiche according to regulation EU No. 2019/2016

HSW59F18EIPT
Category of the model| Refrigerator-freezer
Energy efficiency class| E
Annual energy consumption(kWh/year) (1)| /
Total volume(L)| 601
Volume refrigerator(L)| 391
Volume freezer(L)| 210
Star rating|
Temperature of other compartments>14°C| Non applicable
Frost-free system| Yes
Freezing capacity(kg/24h)| 12
Climate rating (2)| SN-N-ST-T
Noise emission class and airborne acoustical noise emissions (db(A) re 1pW)| C(35)
Temperature rise time (h)| 5
Ice making capacity| kg/24h
Type of appliance| freestanding

Explanations:
• Yes, featured
(1) Based on the results of the standards conformance test over 24 hours. The actual
consumption depends on the use and the location of the appliance.
(2) Climate rating SN: This appliance is intended for use in an ambient temperature of between + 10°C and +32°C
Climate rating N: This appliance is intended for use in an ambient temperature of between + 16°C and +32°C
Climate rating ST: This appliance is intended for use in an ambient temperature of between + 16°C and +38°C
Climate rating T: This appliance is intended for use in an ambient temperature of between + 16°C and +43°C

Additional technical data

Customer service

We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please first check section TROUBLESHOOTING.
If you cannot find a solution there, please contact

► your local dealer or
► our European Call Service-Center (see listed phone numbers below) or
► the Service & Support area at www.haier.com where you can activate the service
► claim and also find FAQs.
To contact our Service, ensure that you have the following data available.
The information can be found on the rating plate.

Model ____
Serial No. ____
Also check the Warranty Card supplied with the product in case of warranty.

European Call Service-Center

Country*| Phone number| Costs
Haier Italy (IT)| 199 100 912|
Haier Spain (ES)| 902 509 123|
Haier Germany (DE)| 0180 5 39 39 99| • 14 Ct/Min Landline
• max 42 Ct/Min Mobile
Haier Austria (AT)| 0820 001 205| • 14,53 Ct/Min Landline
• max 20 Ct/Min all others
Haier United Kingdom (UK)| 0333 003 8122|
Haier France (FR)| 0980 406 409|

• For other countries please refer to www.haier.com
  Haier Europe Trading S.r.l
  Branch UK
  Westgate House, Westgate, Ealing
  London, W5 1YY

Duration of the guarantee of the refrigerating appliance:
Minimum guarantee is: 2 years for EU Countries, 3 years for Turkey, 1 year for UK, 1 year for Russia, 3 years for Sweden, 2 years for Serbia, 5 years for Norway, 1 year for Morocco, 6 months for Algeria, Tunisia no legal warranty required.
The period of spare parts for the repair of the appliance:
Thermostats, temperature sensors, printed circuit boards and light sources are available for a minimum period of seven years after placing the last unit of the model on the market.
Door handles, door hinges, trays and baskets for a minimum period of seven years and door gaskets for a minimum period of10 year, after placing the last unit of the model on the market.
*For further information about the product, please consult https://eprel.ec.europe.eu/ or scan the QR on the energy label supplied with the appliance.

Haier United Kingdom (UK)
0333 003 8122
Haier Europe Trading S.r.l
London, W5 1YY
Westgate House, Westgate, Ealing

References

• Choose your country or region - Haier
• Choose your country or region - Haier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>