HARCHSUN B366 LED Downlight User Manual
- June 15, 2024
- HARCHSUN
Table of Contents
HARCHSUN B366 LED Downlight
PRODUCT DIAGRAM
TECHNICAL PARAMETERS
POWER
- Wattage: 8W
- Voltage: 120V
- Current: 0.285A
- Power Factor: >0.9
LIFESPAN
- Average Life(Hours): 50000+
- Switching Time: >40000
ENVIRONMENT
- Operating Temperature: 14° F to 104°F
- Damp Location: YES
ILUMINATION
- Lumens: >1000LM
- Equivalency: 100W
- Color Rendering Index(CRI): >80
- Beam Angle: 120°
- Dimmable: YES
- Efficiency(lm/w): >110lm/w
- Trim Color: WH/BLK/GRY
CONSTRUCTION
- Housing Material: Aluminium+PC
- Weight: 285g
- Cut Hole: 4-1/8 Inch
- Trim Size: 4.7 inch
PARTS INCLUDED
EASY INSTALLATION
Warning : If you are unfamiliar with electrical connection, consult a qualified electrician. Disconnect power at fuse box or circuit breaker before proceeding. The knockouts maybe sharp, wear gloves and safety glass.Please ensure that all wires in and out are wired firmly
- Cut a 4-1/8 lnch(lOSmm)hole
- Remove the knock-out on the side and open the box Run the wire from power source
- Connect the wires: White to White( Neutral) Black to Black (Live); Copper to Green (Ground)
- Connect the junction box to the light Tighten the connector
- Put the junction box through the hole in the ceiling and push up the springs to insert the luminaire inside the ceiling.
- Slide the CCT switcher to choose your favorite color. Afterwards, hold the springs upwards through! the cut-out hole until securely fixed.
TROUBLESHOOTING
Warm Tips:
In addition to the below common resolution, you are mostly welcome to contact us via AMAZON In box or email us at harchsun@outlook.com for further support.
Read User Manual Online (PDF format)
Loading......