Soukele TFL-02 LED Atmosphere Lamp User Guide
- June 15, 2024
- Soukele
Table of Contents
TFL-02
Quick Start Guide
Safety Instructions
- Read, keep and follow this quick start guide.
- The working temperature should be between -10° to 45 °C. Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- Clean the surface of the product with a soft, damp cloth (water only). Do not use any sprays near the product. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia or abrasives.
- The product is not waterproof. Avoid exposing to liquids or drops of water.
- Do not disassemble, repair or modify the product by yourself.
- Only use attachments/accessories specified by the manufacturer.
What’s in the box?
Light strip x 1
Lampshade x 3
Cap x 1
Wrench x 1
Remote controller x 1| Profile x 3
Iron foot x 2
Screw x1
Button controller x 1
Quick Start Guide x 1
---|---
NOTE:
As part of our efforts to reach our environmental goals, the product does not
include a power adapter. We encourage you to re-use your general adapter (used
for mobile phone or other electronics) with USB-A port that output voltage is
5V,2A.
Three Ways to Control
- Button Control
| Short press: Enter music sync mode
---|---
| Short press: Power ON/OFF
| Short press: Change the mode of light - Remote Control
IMPORTANT: Before using the remote controller, please make sure the plastic isolate protection plate have been taken out from the controller.
- Smart APP Control
A) Pairing your product with the App
- Download the “LED LAMP” APP with your mobile phones by scanning the QR code or search the “LED LAMP” APP in in APP store (iOS devices) or Google play (Android devices).
http://url.szszjkj.com/79810915950 - After the APP are downloaded successfully, you need to
a). Turn on Bluetooth function in your smart device
b). Open the APP, tap the device icon and follow the onscreen instructions to complete pairing.
NOTE:
- Must follow the onscreen instructions to complete pairing. For example, the Android device need to open the location function and allow permission, if you do not allow, you cannot use the APP perfectly.
- When the second user wants to connect this light, please make sure the first user disconnects it.
- If you cannot connect the light to the app, please:
1). Ensure the light is powered on.
2). Check if the Bluetooth on your smart device is turn on.
3). When connecting for the first time, ensure your smart device is closed to the product.
4). Check if there is another smart device is connected.
5). If you are still experiencing a connect error, delete the APP, and download it again, following the instructions provided previously.
B) How to use the APP
On the homepage interface, pull down to refresh, the APP will automatically
search for nearby devices. After finding the device, Click the device icon to
enter the light control interface.
You can also click the ” ” button on the upper right corner, select the device
and enter the light control interface.
(Select LED DMX 00-XXXX device under Dazzle RGB)
- Setting: You can set RGB sorting, timer, button, shake, and change skin here.
- Color interface: The color interface has three parts: color ring, aisle and WHT DIM.
- Mode interface: you can choose the mode, adjust the speed and brightness what you want.
- Custom interface, you can add color, choose mode, adjust speed.
- Music interface: It is composed of two parts: voice control and music.
The voice control interface has hundreds of voice control modes to choose. The music interface requires your smart device to play songs.
How to install your product?
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has evaluated to meet general RF exposure requirement.
The device can be used be in portable exposure without restriction.