FULGOR MILANO FM4BM28FBI 28 Overlay Built in Fridge Instruction Manual

FULGOR MILANO FM4BM28FBI 28 Overlay Built in Fridge

Thank you for purchasing this product.
Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners. This product is intended solely for households. This appliance must be used only for purposes of storage of food, any other use could be dangerous and the manufacturer will not be responsible for any occurrences as a result. Also, it is recommended that you take note of the warranty conditions.

Safety information

WARNING This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, “WARNING” or “CAUTION”.
DANGER Danger means that failure to heed this safety statement may result in severe personal injury or death.
WARNING Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
CAUTION Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.

• All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Keep the appliance and its cord out of reach of children less than 8 years.(EU).
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• The maximum loading capacity of interior shelves is 22lbs(10kg) each.
• The appliance shall be used at an ambient temperature listed according to its climate class: 89˚F(32˚C) ± 35˚F(2˚C) on appliances of climatic class 0,1,2,3,4,6 or 8; 109˚F (43˚C) ± 35˚F(2˚C) on appliances of climatic class 5 or 7.
• The appliance uses a flammable insulation blowing agent (C5H10), disposal of the appliance shall in accordance with the regulations of local authorities. The appliance provided with LED light, the LED has to be replaced by identical light only.

R600a WARNINGS:

• WARNING Risk of fire / flammable materials
• Keep ventilation openings in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• To avoid a hazard due to instability of the appliance, it must be repaired in accordance with the instructions.
• Handling, moving, and use of the refrigerator or freezer to avoid either damaging the refrigerant tubing, or increasing the risk of a leak.
• Component parts shall be replaced with like components and that servicing shall be done by factory authorized service personnel to minimize the risk of possible ignition due to incorrect parts or improper service.

DANGER

• Risk of child entrapment. Before you throw away your old refrigerator or freezer; take off the doors leave the shelves in place so that children may not easily climb inside.
• If the LED lamp is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

CAUTION

• Risk of fire or explosion due to puncture of refrigerant tubing.
• Follow handling instructions carefully.
• Consult repair manual / owner’s guide before attempting to service this product.
• All safety precautions must be followed.
• Dispose of appliance in accordance with Federal or Local regulations.
• Do not use mechanical devices to defrost appliance.
• Do not puncture refrigerant tubing.
• Flammable refrigerant used.

Disposal of Appliance
Dispose of your appliance packaging properly. Refrigeration equipment must be properly disposed of in a way which protects the environment. This applies to your old appliance and to your new unit once it has reached the end of its service life. Please adhere to local regulations regarding disposal of the appliance for its flammable refrigerant and blowing gas.

WARNING Please ensure that old, end-of-life appliances are rendered unusable before disposal by removing the plug, cutting the power cable, and removing or destroying any snap fastenings or bolts. You will thus prevent children from locking themselves in the appliance during play (risk of suffocation) or endangering their lives in any other way.

• The appliance must not be disposed with normal household waste collection.
• The coolant circuit, particularly the heat exchange at the back/bottom of the unit, must not be damaged.
• The symbol on the product or its packaging indicates that this product is not to be handled as normal household waste but is to be taken to a recycling collection point for electrical and electronic goods. By correctly disposing of this product you are contributing to the protection of the environment. Improper disposal endangers health and the environment. Further information about the recycling of the product may be obtained from your town hall or local waste collection department.

Energy Saving
For better energy saving we suggest:

• Installing the appliance away from heat sources and not exposed to direct sunlight and in a well ventilated room.
• Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuous functionalizing of the compressor.
• Do not excessively load items so as to ensure proper air circulation.
• Force a defrost cycle if there is a build up of ice preventing good airflow inside the appliance.
• In case of power outage, it is advisable to keep the refrigerator door closed.
• Open or keep the doors of the appliance open as little as possible.
• Avoid adjusting the setting to lower temperatures than necessary.

Before First Use

You must allow the fridge to settle for at least four hours prior to switching the power on. It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly drying the interior. The fridge may have an odor to it at first use. This will disappear as the appliance cools.
Please note: The appliance will start 41˚F (5˚C) for fridge and -0.5˚F(-18˚C) for freezer and work continuously until it comes down to the correct temperature. If the appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary damage to the compressor. Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance. This fridge cools your food by making the inside back of the cavity cold. It is normal for frost to build up on this surface; it then dissipates and drains through a small drain at the bottom, where it evaporates harmlessly. The presence of frosting at the back is not a malfunction of the fridge.

Use

Fridge Use

• Never put liquids in the refrigerator uncovered.
• Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into the refrigerator.
• Nothing should rest against the rear wall of the refrigerator, as this will cause frost and possible condensation problems which will be difficult to remove.
• Make sure food is clean and any extra water is wiped away before putting into the fridge.
• Wrap or cover food before putting into the fridge. This will help prevent the loss of moisture, keep food fresh and avoid unpleasant odors.
• Sort foods prior to storing. Any foods to be used soon should be stored at the front of the shelf to prevent deterioration caused by the door being open for prolonged periods.
• Do not overfill the fridge. There should be sufficient space between the foods to allow the cool air to circulate.
• Thawing frozen foods in the fridge compartment will help to keep the temperature low and save energy.
• Never store raw meats on shelves above cooked meats or other produce. This will help to prevent juices from raw meat contaminating other foodstuffs.

Freezer Use

• The freezer compartments are designed to store only frozen food.
• Never put hot or warm foods in the freezer, allow them to cool fully before putting them into the freezer.
• Follow the instructions on the food packaging for storage of frozen food. If no information is provided, foods should not be stored for more than three months after the purchase date.
• Store food in small packages (ideally less than 2.2 lbs (1kg) ). This reduces the freezing time and improves the quality of the food after thawing.
• Wrap food before putting into the freezer. To stop the wrapping sticking together, ensure it is dry.
• Label the food before freezing with information including type of food and dates of storage and expiry.
• Once food is thawed, it must not be refrozen. Only defrost as much food as is required to prevent wastage.
• Bottled or canned drinks should not be stored in the freezer compartments as they could explode.
• The maximum amount of fresh food that can be frozen within a 24 hour period is 5.8 lbs ( 2.6kg).
• Do not attempt to freeze more than the maximum amount.

Fresh Zone Drawer

• The temperature inside the Fresh Zone drawer can be regulated from 37˚F (3˚C) to 26˚F (-3˚C). This is the ideal drawer to store meat and fish.

Storage

The fridge section is for short term food storage. Although low temperatures can be maintained, extended periods of food storage is not recommended. As the cold air circulates within the fridge, the temperature can vary between the different sections. As such, foods should be stored in different sections according to type.

1. Butter, cheeses etc.
2. Food in jars and bottles.
3. Drinks, e.g. milk.
4. Cooked food.
5. Yogurts, preserves etc.
6. 75cl bottles or ready meals etc.
7. Fruit and vegetables.
8. Fresh meat and fish/fruit and vegetables.
9. Storage of ice cubes.

The fridge shelves can be moved according to the storage requirements within the fridge section. To move the shelf, lift up the rear section and then pull it outwards. To replace, slide the shelf back into the slot, and then lower the rear section. The most energy-saving configuration requires drawers, food box and shelves to be positioned in the product, please refer to the above pictures.

Control panel

1. The first time switching on the appliance, the default settings are: 41˚F (5˚C) for fridge, 32˚F (0˚C) for the freezer) 0.5˚F(-18˚C). If you want to adjust the temperatures or functions manually, see the fridge and freezer temperature adjustments below. Please note that the temperature display is set at the factory in ˚F or ˚C and cannot be changed.
2. Fridge temperature adjustment; press this button on left side of control panel to achieve different fridge temperatures from 35˚F (2˚C) to 46˚F (8˚C).
3. Freezer temperature adjustment; press this button on right part of control panel to achieve different freezer temperatures from 5˚F (-15)˚C to-15˚F (-25˚C).
4. Fresh Zone Drawer temperature adjustment function; press this button on left side of control panel to achieve different Fresh Zone Drawer temperatures from 37˚F (3˚C) to 26˚F (-3˚C). This function can be turned on/off by continuously pressing the same button for three seconds (shows OFF).
5. Fast Cooling function; press this button and the light of button will illuminate and the Fast Cooling function is turned on. The fridge starts to work automatically at temperature setting 35˚F (2˚C) and quits after 24 hours and the button will no longer be illuminated.
6. Holiday function; press this button and the light of button will illuminate turning on the Holiday function automatically setting the temperatures at; fridge 62˚F(17˚C) and freezer at -0.5˚F(-18˚C).
7. Eco function; press this button and the light of button will illuminate turning on the Eco function automatically setting the temperatures at; fridge 41˚F (5˚C) and freezer compartment works at setting of – 0.5˚F(-18˚C). The Fresh Zone works at setting of 37˚F (3˚C).
8. Fast Freezing function; press this button and the light of button will illuminate turning on the Fast Freezing function. The freezer will work at Fast Freezing function temperature setting of -15˚F (-25˚C). After 24 hours, Fast Freezing function quits automatically.
9. Power ON/OFF; Press this button for 3 seconds to switch off your appliance and the power is shut off and the button will no longer illuminate. Internal lamps eliminate, compressor stops working. To turn on, press the same button for 3 seconds and the button illuminates and power is connected again.
10. Forced Defrost Function; On the no frost models, there is a forced defrost function. Press these buttons + for 5 seconds to switch on the forced defrost function and the freezer button will illuminate. The forced Defrost Function will defrost ice/frost build-up on the freezer evaporator. To switch off the Forced Defrost function, press the same two buttons + 3 seconds and freezer temperature will return to its set temperature.
11. Fault Display; This appliance has ‘fault display & alarm’ function. Once the sensors detect a fault, the alarm will display the fault on the display control panel. The appliance still cools but professional service technician should be called and check the appliance.
    • F2 – Sensor of adapt zone
    • F3 – Sensor of fridge apartment
    • F4 – Sensor of freezer compartment
    • F5 – Sensor of defrosting
    • 2E – Fault of fan/motor in freezer
    • CE– Communication fault between main panel and display panels.
      The above Errors only show on the display without audible alarm.

Freezer Over Temperature Alarm: Once the freezer temperature arrives at the set temperature, after that, if the temperature rises to >77°F (-1 °C), the alarm will start, accompany with flash of freezer temperature digit. Press any button to cancel the voice alarm. The flash will remain until the temperature is <77°F (-1 °C).
PS: Main board locate is in the compressor compartment.

Instructions for Ice Maker (FM4BM28IFBI Model only)

1. Connect the waterline connector to water source, and check for any connector leakages after water is supplied.
2. Open the freezer door, pull out the ice box, and turn on the ice maker for ice making; then, install back the ice box.
3. The ice maker indicator shows yellow and is flashing, indicating that ice making is in process.
4. The ice maker indicator shows yellow and is not flashing, indicating that the ice box is full and ice making is paused.
5. The ice maker indicator shows red and is flashing, indicating that the ice box is not in position or has been pulled out.
6. If the ice maker indicator shows red and is not flashing, indicating that the ice maker is malfunctioning.

LED Light Replacement Instructions
Note: Only proceed with the LED light replacement if you are confident in your abilities, otherwise please contact a service technician to assist.

Lighting parameters: 12V / 10W

1. Unplug the power plug.

2. Remove the aluminum alloy trim strip on the top of the
   LED surface light source, and then remove the left and right fixing screws.
   Steps 1 and 2 are shown below.

3. Replace the spare LED light board.

4. Replace the aluminum alloy trim strip in turn.

Care and Cleaning

• Always disconnect the appliance from the power supply before any cleaning or maintenance.
• The fridge and freezer sections should be cleaned using a solution of baking soda and lukewarm water. Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.
• Clean the shelves and door bins separately by hand with a mild solution of liquid detergent and water. Do not put them in the dishwasher.
• If the appliance is not to be used for prolonged periods of time, unplug and clean the appliance. The doors should be left slightly ajar to prevent the formation of mildew and unpleasant odors.

Defrosting
The product has a no frost system which is designed to prevent the heavy build up of ice. Under normal use, there should be no need to force-defrost the freezer system.
Please note: If you are regularly finding a heavy build up of ice, or pools of water, in the freezer section then it is likely that the door is not sealing properly. This could be due to a defective door seal or an incorrectly fitted, or overly heavy, overlay panel. For more information see the troubleshooting section about ice.

Troubleshooting

If you have any problems with your appliance, you should check the troubleshooting prior to calling Customer Care.

• If the appliance is not working, check:
  • That there is power to the appliance.
  • The house fuses / breakers are intact.
  • The fridge has not been turned off.
  • The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the socket is faulty or use a tester.
• If the appliance is working, but not very well, check:
  • The appliance is not overloaded.
  • The thermostat is set to an appropriate temperature.
  • The doors are closing properly.
  • The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall.
  • There is enough ventilation at the side and rear walls.
• If the appliance is noisy, check:
  • The appliance is level and stable.
  • The rear walls are clear, and there is sufficient ventilation as per the installation requirements.
  • Note: The cooling gas in the refrigerator may make a slight bubbling or gurgling noise, even when the compressor is not running.
• If the appliance is beeping, check:
  • That the doors are closed. An alarm will sound after 60 seconds of a door being open.
• If ice has formed on the back wall of the fridge:
  • It is normal for some ice droplets to form on the back wall of the fridge. This does not constitute a fault with the appliance.
  • Ensure that no items inside the fridge are in contact with the back wall.
  • Check that there is some resistance when opening the door of the appliance. If it opens at the slightest touch it may mean that the door seal needs to be replaced.
  • Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve the issue yourself, contact Customer Care so that the seal can be replaced.
  • This can be due to the door overlay panel not being properly fitted. If you are at all unsure, ask your installer to check the panels installations.
• If excessive ice has formed in the freezer:
  • Check that there is some resistance when opening the door of the appliance. If it opens at the slightest touch it may mean that the door seal needs to be replaced.
  • Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve the issue yourself, contact Customer Service so that the seal can be replaced.
  • This can be due to the door overlay panels not being properly installed. If you are at all unsure, ask your installer to check the doors.
• If one or more of the LED units within the appliance is not working:
  • Contact Customer Care to arrange a service visit or to order parts.

Installation Preparation

This appliance must never be installed close to heat sources, e.g. heating elements or cookers, nor in damp places. Seek the help of another individual, or two, when installing this appliance. This appliance may have sharp edges. Wear adequate PPE for the task and environment.

• To ensure the appliance is level, you should use the height adjustable feet at the front of the appliance.
• The condenser system at the rear of the appliance must not touch the rear wall. The greater the gap, the better.
• The appliance must be installed with adequate ventilation to allow air to escape and that there is space between the rear of the appliance and the wall.

Ventilation
Ventilation is the main consideration when installing any refrigeration unit into a fitted kitchen. The heat removed from the cooling compartment needs to be dissipated away from the appliance and into the atmosphere. Incorrect ventilation can lead to premature compressor failure, excessive power consumption, total system failure and may invalidate the warranty provided with the appliance. This appliance is intended to be installed into a cabinet, therefore the instructions on the following pages need to be met so that the fridge operates properly and to meet warranty requirements.

Installation Instruction

1. Position the appliance in front of the cabinet and plug it in. Ensure power is getting to the appliance. Place the appliance into the cabinet. Take care not to pinch the power cable.
2. The tail of the lower bracket covers will catch the front edge of the cabinet base – this is your desired depth. Level the unit with the front legs.
3. Use the hinge spacers (optional) to position the appliance laterally in the cabinet opening. Then install the gap filler strip (optional) and fix appliance to the cabinet through the hinges, bottom brackets and upper fixation points.
4. It is suggested to loosen the two nuts and adjust up slightly the leveling bolts on each door’s top bracket to provide additional adjustment once the panel is mounted. Measure the distance (A) from the top of the bracket to the top of the cabinet and distance (B) from the top of the lower door bracket to the bottom of the cabinet.
5. Remove the brackets from the appliance doors and using measurements (A) and (B) attached the brackets to the door overlay panels centered horizontally.
6. Please follow the steps below to mount the door overlay panel and the refrigerator door.

Reversing the appliance doors
We recommend you seek the help of another individual to support the doors while performing this operation.

1. Remove the screws connecting the doors to the hinges. Place the doors to the side.
2. Pop out the plastic screw hole covers from the positions where you will relocate the hinges to. Save these plugs.
3. Remove the screws connecting the hinges to the body of the appliance.
4. Move the hinge positions diagonally for each door and rotate 180˚ and fix to the new position.
5. Use the plugs to cover the newly exposed screw holes where the hinges once were.
6. Use the extra hinge covers for opposite positioning to finish the look.
7. Reattach the door panels to the hinges.

Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed. With the door closed, use a hair dryer to expand the seal and fill the gap between the door and the body of the appliance. Take care not to use the hair dryer too close to the appliance, which could damage the seal. A distance of approximately 10cm (4”) should be adequate. When completed, allow the seal and door to cool before touching them. Once done, the seal should remain in position.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>