Tivoli Audio M2D Two Digital Speaker Owner’s Manual

Tivoli Audio M2D Two Digital Speaker

WELCOME
Thank you for your purchase! Model Two Digital mixes classic design and the latest technology to create a simple solution for wireless audio in the home. Encased in a furniture-grade wood cabinet and finished with a high-quality metal grill, this piece elevates the craftsmanship and technology of the ART by Tivoli Audio product line. To take full advantage of what your new speaker is capable of, please take a moment to read this owner’s manual and the safety instructions. If you have any questions, please do not hesitate to contact your dealer or Tivoli Audio directly. Please save the carton and original packing should you ever need to ship your radio, as shipping damage is not covered by the factory warranty. On behalf of all of us, thank you for choosing Tivoli Audio, and enjoy your new Model Two Digital!
Included with your Model Two Digital you should find:

• One (1) External Power Supply and accompanying plugs
• Four (4) Rubber Feet

Please contact your dealer or Tivoli Audio if any of these items are missing.

Tivoli Audio
Boston, MA
USA
www.tivoliaudio.com
[email protected]

Guide to Features

Front Panel

1. POWER/SOURCE/VOLUME KNOB: Short press to turn on, press and hold to turn off. Short press to cycle between Wi-Fi, Bluetooth and Aux In sources. Rotate right to increase volume, rotate left to decrease volume.

2. LED Light Bar: Used to indicate source mode. In normal operation the LED will glow soft white. The source color will be displayed for 5 seconds after the source is selected before reverting to white.

   • White: Speaker is powered on and ready to use.
   • Green: Wi-Fi Mode.
   • Blue: Bluetooth Mode.
   • Orange: Auxiliary Mode.
     Rear Panel

3. AUX IN: Plug in music directly with a 3.5mm for a standalone experience.

4. SERVICE: USB Service port. Only for use by an Authorized Tivoli service center.

5. WI-FI Button: Single Press to enter Wi-Fi Setup Enabled Mode.

6. BT Button: Single Press to enter Bluetooth pairing mode.

7. DC Power: Plug in the provided Tivoli Audio 15V 2A power adapter to power your Model Two Digital.

Auxiliary Mode
Your Model Two Digital can be used as a standalone speaker. Simply use an 1/8” stereo cable to attach any line or headphone level source into the AUX input on the back of your speaker. On the front of your speaker, short press the power knob until the LED is Orange. You can control the volume of the speaker using the volume control on the Model Two Digital or with the volume control of your audio source.

Bluetooth Mode

Pairing
Your Model Two Digital can act as a standalone Bluetooth speaker.

1. Turn on your unit by short-pressing the power knob.
2. On your speaker, short press the power knob until the LED Light Bar is Blue.
3. The LED light will flash blue, indicating pairing mode. If your speaker is not in pairing mode, press the BT Button on the rear of the speaker.
4. Go to the Bluetooth settings on your phone or tablet.
5. Select the device that has a name similar to “Tivoli Audio M2D_XXXXXX”.
6. Once the LED Light Bar shines solid blue, you are paired to the radio. After 5 seconds, the light will revert to soft white.
7. You can begin playing your music via Bluetooth.

WiFi Mode

Wi-Fi Setup with Apple AirPlay 2

1. Turn on your unit by short-pressing the power knob.
2. Set your speaker to Wi-Fi mode by short-pressing the power knob until the LED light is Green. The LED will blink green, indicating Wi-Fi Setup mode. If your speaker is not in Wi-Fi Setup mode: short press the “Wi-Fi” button on the rear of the unit.
3. On your iOS device, go to Wi-Fi Settings. Make sure to connect your iOS device to the network that you intend to use your Model Two Digital.
4. Scroll down to “Set Up New AirPlay Speaker…” and select “Tivoli Audio M2D_XXXXXX”.
5. Rename your speaker (recommended) and create a password (optional).
6. Select “Next” and wait for the connection.
7. Wait for the connection confirmation, select “Done”.
8. Once connected the LED Light Bar displays solid green. After 5 seconds the light will revert to soft white.
9. Your speaker is now ready to use with AirPlay 2. With AirPlay 2, you’re in control of your audio.
   For additional support, please visit support.apple.com

Wi-Fi Setup with Google Home

1. Turn on your unit by short pressing the power knob.
2. Install the Google Home app by downloading the Google Home app on your Chromecast-enabled smart phone/tablet.
3. Make sure to connect your smart phone/tablet to the same network that you intend to use to set up your Model Two Digital with Chromecast built-in.
4. Set your speaker to Wi-Fi mode by short-pressing the power knob until the LED Light Bar is Green.
5. The LED will blink green, indicating Wi-Fi Setup mode. If your speaker is not in Wi-Fi Setup mode, press the Wi-Fi button on the rear of the unit.
6. Open the Google Home app on your smart phone/tablet.
7. Tap “Devices”, then “+ Add” and follow the on-screen directions.
8. Tap set up a device a new devices.
9. Create a new home or choose an existing home.
10. You should see “Tivoli Audio Model Two Digital” Found. Tap “Yes”.
11. Wait for your device to connect.
12. Select “yes” when you hear the sound from the speaker.
13. Decide whether or not you would like to opt in to Google’s device stats and crash reports. There are no wrong answers!
14. Choose a location for your device, for example “Living Room”.
15. Create a unique name for your Model Two Digital.
16. Select the WiFi network you would like your speaker to be connected to.
17. Wait while your Model Two Digital connects to your WiFi network. Once your device is connected the LED will show solid Green for 5 seconds, before reverting to white.
18. If you would like to link your Google account to your Model Two Digital, you can choose to do so on this screen.
19. After reviewing your setup, your Model Two Digital is ready to use. Look for the Cast button in your favorite music apps to listen on your new speaker.
20. Once connected, stream the entertainment you love from your phone, tablet or laptop to your Model Two Digital.
    For additional support, please visit support.google.com/chromecast

How to use Chromecast built-in:

1. Open any Chromecast-enabled app.
2. Select the CAST button in the app.
3. Select the Model Two Digital.
4. Press the PLAY button in the app.
   For additional support, please visit support.google.com/chromecast

How to use AirPlay 2:

1. Connect your iOS device to the same network as your Model Two Digital.
2. On your iOS device, open the Control Center.
3. Press and hold the audio card in the upper-right corner, then tap AirPlay.
4. Select your Model Two Digital from the list of available AirPlay devices and start playing.
   For additional support, please visit support.apple.com

How to use Spotify Connect:
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-partylicenses

How to use TIDAL Connect:
Play a song and tap on the ‘Now Playing’ bar. Tap on the device selector at the top right. Choose a TIDAL Connect-enabled device.

Other Information

Firmware Updates
Your Model Two Digital will have periodic software updates about every 4 months (and also possibly when you first use the product). The speaker will automatically update itself when it is connected to WiFi. No need to do anything!

Factory Reset
A factory reset will restore all features on your Model Two Digital to their default settings. When your speaker is powered on and displaying a solid white LED, press and hold the WiFi and BT buttons until the LED blinks purple. Release the buttons. Model Two Digital will automatically reboot once the factory reset is complete.

Standby Mode
If your Model Two Digital is powered on and sitting idle, it will automatically enter a standby mode.

• Normal Standby: When the Model Two Digital has not been connected to WiFi, or paired to Bluetooth, the speaker will enter normal standby after 20 minutes of not playing audio. To wake the speaker, single press the Power/Source Knob. Power consumption in Normal Standby mode is less than 0.5W.
• Network Standby: When the Model Two Digital has been connected to WiFi and/or paired, the speaker will enter network standby after 20 minutes of not playing audio. Network standby mode is indicated by a dim white LED. To wake the speaker, single press the Power/Source knob or select the speaker from the Control Center, CAST menu, Spotify Connect menu or Tidal Connect menu. Power consumption in Network Standby mode is less than 2W.

Care
A dry cloth is recommended to clean the back and wooden cabinet and metal grill of your Model Two Digital. Do not expose to water.

Limited Warranty

Tivoli Audio manufactures its products to very high standards and we are confident our products will perform well. Accordingly, we warranty our products against manufacturing defects in material and workmanship to the original owner, for a period of one year in the United States and two years in the European Union from the original date of purchase. For countries where minimum warranty terms are determined by statute, the warranty term is the statutory period required. In all other locations, the warranty term is one year. This warranty does not extend to damage caused by improper installation, faulty ancillary equipment, modifications, unauthorized repair, shipping damage or loss, abuse, accidents, use on improper voltage/current, lightning or other acts of God, normal wear and tear, commercial use, or purchase from unauthorized dealers. Proof of purchase as evidence the unit was purchased from an authorized dealer within the warranty period may be required for warranty service. Should service be necessary, please do NOT return the product without first contacting your dealer or Tivoli Audio. This warranty is non-transferable. Tivoli Audio will not pay for loss of time, inconvenience, loss of use of the product, or damages caused by this product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties or the exclusion of consequential damages, therefore, these restrictions may not apply to you.
For more warranty information please visit us at www.tivoliaudio.com
For European warranty information please visit us at www.tivoliaudio.eu

Specifications

• Model: Model Two Digital
• Type: WiFi ™ / Bluetooth ® Speaker
• Drivers: 1x 3.5″ Driver, 1x 0.75″ Tweeter
• Rated Output: 20W
• Rated Input: 15Vdc, 2A
• AC Adapter: DYS830-150200W-K
• Dimensions: 252mm W x 152mm H x 158mm D
• Weight: 4.9lbs, 2.2kgs
• Operating Temperature: 0-45°C

DECLARATION OF CONFORMITY

• Company: Tivoli Audio, Inc. 28 Atlantic Ave, Suite 133, Boston MA 02110, USA
• Manufacturer: Tivoli Audio, Inc. 28 Atlantic Ave Suite 133, Boston MA 02110, USA
• Product: Model Two Digital
• Brand Name: Tivoli Audio
• Model No: Model Two Digital

The above model complies with the following Directives:

• Low Voltage Directive 2014/35/EU
• RED Directive 2014/53/EU
• ERP Directive 2009/125/EC

The product described above is in conformity with the requirements of the following documents:

-17 V3.2.4;

EN301489 -1 V2.2.3;

EN 300328 V2.2.2

EN 301893 V2.1.1

EN 300440 V2.1.1

EN 300440 V2.2.1

EN IEC 62311:2020

| 2307RSU068-E1

2307RSU068-E2

2307RSU068-E3

2307RSU068-E4

2307RSU068-E5

2307RSU068-E6

2307RSU068-E7

| 01/09/2023

This product which is defined herein was manufactured under the conditions of the European Union directive and standards.

Manufactured by
Tivoli Audio, Inc
Boston, MA USA
European Importer
Tivoli Audio, Cooperatief
Mariaplaats 3
3511 LH Utrecht
The Netherlands
www.tivoliaudio.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>