Fitness Reality 2804 Adjustable Weight Bench Owner’s Manual

Fitness Reality 2804 Adjustable Weight Bench Owner’s Manual

IMPORTANT: FOR NORTH AMERICA ONLY

For damaged or defective product, questions, replacement parts or any other service  support, please contact our customer service department by the below methods:

For The Best Service, please Email:service@paradigmhw.com
Response Time: 1-2 Business Days
Emailing us with the information above will be the best method to receive a response during
peak business hours
Website :
www.paradigmhw.com
Toll-Free:
1-844-641-7920
(8:00 AM – 5:00 PM Pacific Standard Time, Monday thru Friday)
Response time may vary via calling

Please have the following information ready when requesting for service:

• Your name
• Phone number
• Model number
• Serial number
• Part number
• Proof of Purchase

For damaged or defective product please contact our customer service before returning to the store.
Paradigm Health & Wellness, Inc. 1189 Jellick Ave.
City of Industry, CA 91748, USA

UNDER PENALTY OF LAW THISTAG NOTTO BE REMOVED EXCEPT BY THE CONSUMERALL NEW MATERIALCONSISTING OF POLY URETHANE FOAM PAD_100%| NOTICEThis article does not meetthe flammability requirements of California Bureau of Home Furnish- ings technical bulletin 117. Care should be exercisedmear open flame or with booming cigarettes’.
---|---
VREGISTRY NO. VA25302 (CN)
Certification is made by the manufacturer that the materials in this artide are describedin accordance with law.
SOUS PEINE DE SANCTION LEGALE, CETTE ÉTIQUETTENE PEUTETRE ENLEVÉE PAR UNE PERSONNE AUTRE QUE LE CONSOMMATEURENTIÈREMENT FABRIQUÉ DE MATÉRIAUX NEUFS REMBOURRAGE DE MOUSSE DE POLYURETHA NE 100%
SOUS PEINE DE SANCTION LEGALE, CETTE ETIQUETTENE PEUTETRE ENLEVÉE PAR UNE PERSONNE AUTRE QUE LE CONSOMMATEURENTIÈREMENT FABRIQUÉ DE MATÉRIAUX NEUFS REMBOURRAGE itDE MOUSSE DEPOLYURETHANE 100%| Anise product ne satisfier pas aux critters  – ité specifies à article 117 du devise technique du California Bureau of Home Furnishings. Ne pas utilizer pres. dunes source de choler ou dune flamed nue (cigarettes, etc)
NO D’ENREGISTREMENT VA25302 (CN)
Cite etiquette est ap posse conformément aux fois Cana- dienes
Paradigm Health and Wellness, Inc. 1189 Jellick Ave. City of Industry, CA 91748 USA
SE SANCION ARA LEGALMENTEA QUIENES QUITEN ESTA ETIQUETA SOLOEL CONSUMIDOR PODRA QUITARLAMATERIAL COMPLETAMENTE NUEVO COMPUESTO DE 100% RELLENO DE ESPUMA DE POLIURETANO.| NOTIFICACIÓN Este articular no se adjust a la inflamabilidad requisites de Officine de Mobilization boleti technical 117. Cu dado de California Deben jerkers circa de una llama Abeita o con cigarettes’ radiates
NO. DE REG VA 25302 (CN)
El fabricate certificate que los materials de este articular se describe según las leyes
Paradigm Health and Weliness, Inc. 1189 Jellick Ave. City of Industry CA 91748 USA

AWARNING/AVERTISSEMENT/ADVERTENCIA

Pinch point, keep hands clear
Princes moment, grader les mains clair
Punto Pinch, Mantegna las mamos alidades

Serial number/Numeri de séria / Numeri de series: MADE IN CHINA FABRIQUE EN CHINE HECHO EN CHINA

For customer assistance, Monday-Friday:
Pour le service a la clientele composer le, Lundy à vended:
Para service’s al client, Illume al, lunes a viernes:
1-844-641-7920 8am-5 pm PST
FITNESS REALITY

AWARNING/AVERTISSEMENT/ADVERTENCIA
Pinch point, keep hands clear
Pincer moment, garder les mains clair
Punto Pinch, Mantegna las mamos alejadas

IMPORTANT SAFETY GUIDELINES

1. Read all instructions carefully before assembling and operating this product. This unit is designed with optimum safety in mind. Retain this owner’s manual, do not remove any safety labels from the machine, and keep the original purchase receipt for future reference.
2. Make sure your equipment is correctly assembled before you use it 2. Be sure all screws, nuts and bolts are tightened prior to use
3.  Always wear proper exercise apparel when using the equipment. Use care when getting on or off the unit.
4. If any time you feel faint, light-headed or dizziness while operating the equipment, stop exercising immediately. You should also stop exercising if you are experiencing pain or any kind of discomfort
5.  Keep children and pets away from the equipment at all limes.
6. Only one person should use the equipment at a time
7. Make sure your equipment is correctly assembled before you use it. Be sure all screws, nuts, and bolts are tightened prior to use.
8. Do not operate this or any exercise equipment if it is damaged
9. Wait 2 hours after eating b
10. ore using the exercise equipment. If you get nauseous, stop exercising as soon as you feel queasy. 10. Always use this equipment on a clear and level surface. Do not use outdoors or near water
11. Keep hands and feet away from any moving parts. Do not insert any object into any openings
12.  Keep loose clothes, jewelry, limbs and long hair away from moving parts
13. Children under the age of 13 should not use this fitness equipment
14. Children from 13 to 18 should have adult supervision
15.   WARNING : It is highly recommend that you have assistance during the assembly of the
    equipment.

WARNING : Before using this equipment you should consult with your personal physician to see if the product is appropriate for you. Do not use this equipment without your physician’s approval if you have any of the following conditions or ailments:

• Extreme obesity Glaucoma, retinal detachment or conjunctivitis

• Pregnancy

• Spinal injury, Cerebral Sclerosis, or acutely swollen joints

• Middle ear infection

• High blood pressure, Hypertension, Recent stroke or Transient ischemic attack

• Heart or circulatory disorders for which you are being treated

• Hiatus hemia or Ventral hernia

• Bone weaknesses including Osteoporosis, Unhealed fractures, Modularly pins, or Surgically
  implanted orthopedic supports

• Use of anti-coagulants including Aspinn in high doses
  Do not exceed the maximum rated weight (load) The maximum weight capacity of this machine is 800lbs/363kgs.

OVERVIEW DRAWING

HARDWARE & TOOLS PACK

ASSEMBLY

STEP:1
A. Rest the Bench on its side and completely pull out the Pin (105) from the bracket on the Main Frame (A).
B. Pull the Front Support Tube (B) outwards and completely reinsert the Pin (105) into the first hole on the bracket of Main Frame (A).

STEP: 2

A. Installing the Front Stabilizer : Lift up the Front Support Tube (B), and then align the Front
Stabilizer (C) holes with the holes on the front curve of the Front Support Tube (B). The square
holes of the Front Stabilizer (C) should point towards the floor. Insert two Carriage Bolts (29)
through the Front Stabilizer (C) and Front Support Tube (B) until the bolts reach through. On the
protruding end of the Carriage Bolts (29), secure on two Curved Washers (63), two Spring
Washers (61), and two Cap Nuts (79). Tighten the Cap Nuts (79) with the two 19mm Wrenches
provided.
B. Installing the Rear Stabilizer: Lift up the rear of the Main Frame (A), and then align the Rear
Stabilizer (D) holes with the holes on the rear curve of the Main Frame (A). The square holes of
the Rear Stabilizer (D) should point towards the floor with the Customer Service Stickers facing
upward. Insert two Carriage Bolts (29) through the Rear Stabilizer (D) and the rear curve of the
Main Frame (A) until the bolts reach through. On the protruding end of the Carriage Bolts (29),
secure on two Curved Washers (63), two Spring Washers (61), and two Cap Nuts (79). Tighten
the Cap Nuts (79) with the two 19mm Wrenches provided.

Hardware

(29) Carriage Bolt 4 PCS

(79) Cap Nuts 4 PCS

(61) Spring Washer 4 PC

(63) Curved Washer 4 PCS

STEP 3
A. Installing the Leg Holder: There are four holes down the Front Support Tube ( B ). They are for height levels. Pick one of the holes and insert the threaded end of the Round Knob ( 106 ) along with one Spring Washer ( 61 ) and one Flat Washer ( 64 ) through the back side. Align the Leg Holder ( G ) to the protruding threaded shaft of Round Knob ( 106 ). Tighten the Round Knob ( 106 ) in a clockwise manner to secure in place the Leg Holder ( G ).

Hardware Pack:

(106) Round Knob 1 PC

(61) Spring Washer 1 PC

(64) Flat Washer 1PC

Adjusting the Front Support Tube
Pull the Pin (105) out and swing the Front Support Tube (B) into one of the following positions:
a. Position P1 gives a flat 0° seat for working out.
b. Position P2 gives an inclined seat for working out.
c. Position P3 is for folding up the Bench for storage.
Completely re-insert the Pin (105) into the hole for the position you select.

NOTE : If you feel the backrest is not at a flat 0° angle, check that
the Front Support Tube (B) is in the P1 position NOT the P2
position.

Adjusting the Backrest

Lift the Backrest (J) upwards to raise the Rear Support Tube (E) off of the tabs that run along the
rear shaft of the Main Frame (A). Then gently lower the Backrest (J) while guiding the Rear
Support Tube (E) back into the new tab height so that your backrest angle is adjusted.
There are six different adjustments:

1. L1 = 85°
2. L2 = 60°
3. L3 = 45°
4. L4 = 20°
5. L5 = 0°
6. L6 = -15°

NOTE: If you feel the backrest is not at a flat 0° angle, check that
the Front Support Tube (B) is position correctly. SEE THE PREVIOUS PAGE

Loose Backrest
If the Backrest (J) feels loose, shifting side to side use the two included 19mm Wrenches to tighten the Nylon Nuts (76).

TRANSPORTATION

Transporting when the bench is set up:
Lift up the Front Stabilizer (C) until the wheels on the Wheel End Caps (133) make contact with the ground, then move the bench to your desired location.

Transporting In Storage Mode:
Lift up the bench by holding the Seat (H) until the wheels on the Wheel End Caps (133) make contact with the ground, then move the bench to your desired location

WARRANTY

MANUFACTURER’S LIMITED WARRANTY
Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual. Paradigm’s obligation under this warranty applies to the following:

COMPONENT
Structural Frame
All Other Components
LENGTH OF WARRANTY
1 year For Home Use Only
90 days For Home Use Only

COMPONENT LENGTH OF WARRANTY Structural Frame 1 year For Home Use Only All Other Components 90 days For Home Use Only (computer display, electronics, upholstery, foam, ball bearings, pulleys, belts, cables, wires, shocks, covers, tension, internal mechanism, wheels, pedals, knobs, accessories and hardware)

Exclusions from Warranty Coverage:
Paradigm does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:

1. Improper installation and/or failure to abide by Paradigm’s installation guidelines;
2. Use of this product beyond normal home use, or in an application for which it was not designed;
3. Cosmetic items such as scratches, dents or discolorations;
4. Damage caused by normal wear and tear, vandalism, and accidental or by animals;
5. Any act of Nature (such as fire, flooding, snow, ice, hurricane, earthquake, lightning or other natural disaster), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.);
6. Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to, among other things, flake, chalk, or accumulate dirt or stains; or
7. Improper operation, alteration, handling, storage, abuse or neglect of the products.

Paradigm, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product’s warranty. All exchanged parts and Products replaced under this limited warranty will become the property of Paradigm Health and Wellness. This warranty is offered only to the original purchaser and is not transferable. Proof of original purchaseis required.
Ordering Replacement Parts
Replacement parts can be ordered by emailing our customer service department:

Service@paradigmhw.com
Open Monday thru Friday 8:00 AM – 5:00 PM (PST).
When ordering replacement parts please have the following information ready:

1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

PARTS REQUEST

Paradigm Health & Wellness, Inc.
EMAIL THIS FORM WITH YOUR RECEIPT OF PURCHASE TO
Service@paradigmhw.com

NAME:_____

ADDRESS:__
CITY:____ STATE:_ ZIP:___
TELEPHONE: (Day)__
(Night)____
SERIAL#:
MODEL#:
PURCHASE DATE:___
PLACE OF PURCHASE:_

References

• Paradigm Health & Wellness
• Paradigm Health & Wellness

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>