EVSPOUSE ES40A1 Commercial 40 Amp Smart EV Charger User Manual

User Manual
Wall-Mounted & Portable EV Supply Equipment
Model: ES40A1

Important Safety Guidelines

Danger: Electrical & Fire Hazard

• The electric vehicle charging station needs to be properly connected to the vehicle charging inlet. Incorrect connection can lead to electric shock or fire during charge.
• Only use main power supply or grid sockets when charging your electric vehicle. The socket must comply with regional/national laws and standards.
• User must comply with the safety instructions written in your vehicle manual and in this document.
• The AC input voltage can not be over 300V. Over voltage would damage this device and void the warranty.
• If either this device or the socket is damaged or faulty, do not use this device. Failure to comply can lead to either a short-circuit, electrocution, explosion, fire or burns.
• Never use the charging cable if it is damaged. Always check both ends of the cable as well as the control box before using the product.
• Always ensure the cable is properly connected to the socket. This includes the connection at the vehicle inlet and the power socket.
• Operating the cable using a damaged socket can result in a serious injury or fire.
• Never attempt to open the cable’s casing on either end. Contact a qualified professional for any servicing or repairs.
• Always connect the right power supply voltage.
• Never use an extension cable.
• Never use a multiple plug socket adapter.
• Never attempt to modify or repair the electric components of this device.
• Never touch any of the electric components of the connector or charging port.
• Keep sockets, plug connection and the electric cable away from the moisture, water, snow, ice and other liquid.
• This device should be supervised when used around children.
• Do not operate this device in temperatures outside its operating range.
• Only clean the product with a dry cloth. Do not use any cleaning agents or flammable solvents, such as alcohol or benzene.

Specifications

• Tip: IP65 means protected against water jets from any angle, but not against strong water jets (IP66), or against complete temporary water submersion (IP67), or against in fresh water to maximum depth of 1.5 meters for up to 30 minutes (IP68). So it is advised to use the rain cover which comes as an attachment with this charger during long-time heavy rain weather, to protect the control box and extend the lifetime of this device.

Display

① Control Box Inner Temperature
② Error Code
③ Inlet Power Supply Connected
④ Rated Current
⑤ Power Charged| ⑥ Time Charged or Time Set (refer Buttons section)
⑦ Real-time Voltage
⑧ Real-time Current
⑨ Real-time Power
---|---

Output Powers

Error Codes

Buttons

| • Set the charging current.
• 40A, 32A, 24A, 16A to select.
• Factory set 40A.
• It remembers the last-time set.
---|---
| • Set the charging schedule.
e.g. Before charging, if you press this buttons twice, the display showing as below, it means the charging will start two hours later automatically.
• Max schedule set is 10 hours.

LED Lights

| ① Yellow light
② Red light
③ Green light
---|---
Red| flash| inlet power supply connected
---|---|---
Red| on| EV connected
Green| flash| charging
Green| on| charge complete
Yellow| on| error

Note: Some EVs start charging automatically when connected. Some EVs may need a manual start to charge.

Disposal

• The disposal of decommissioned devices must be in accordance with the applicable country-specific and regional laws and guidelines. Equipment and batteries must never be disposed of with domestic waste.
• Decommissioned equipment must be placed in a collection facility for electronic waste or disposed of via your dealer.
• Dispose of the packing material in respective collection bins for cardboard, paper and plastics.

Warranty

We guarantee that this device is free from defects in materials and workmanship at the time of manufacture, and provide a 2-year warranty since your purchase date from the e-commerce platforms or EVSPOUSE official website.
This warranty is contingent upon proper use in the application for which such device was intended, and shall be void if 1) device damage caused by user not following the manual, 2) it were modified or disassembled without approval or authorization, 3) it were subjected to physical, chemical or electrical stress that the products were not originally designed for.

Technical Support

If the following troubleshooting guide still can not help settle the problem. Contact us by visiting www.evspouse.com to leave a message.

certified or professional electrician to test the input voltage and solve it.
UV| AC input voltage is too low, less than 85V.| Ask a certified or professional electrician to test the input voltage and solve it.
OC| AC input current is too high. Over 4A higher than the set charging ampere lasting S seconds, or over 8A higher instantly.| Immediately turn off the leakage or over-current protection switch of the distribution box. Check whether there is a low-impedance connection between the charger and the EV.
LC| The leakage current is greater than 20mA.| Immediately disconnect the leakage or over-current protection switch of the distribution box. Check whether the power supply, charging cable or the charging port is damaged or has low-impedance connection to the ground.
OT| The interior temperature of the control box is greater than 185017(85°C).| Make sure the ambient temperature is below 13017(55°C).
CP| Connection Problem.
1. There is any foreign substance between the charger connector and EV’s charging port.
2. Damage of either charger connector or charging port.| 1. Get rid of the foreign substance.
2. Check and find out the damaged part and contact for service.

Factory: No. 2504 Zhencheng Rd, Jiangyin City,
Jiangsu Province, China 214400
info@evspouse.com

References

• EVSPOUSE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>