APEKX BE1029 Wireless Earbuds Instruction Manual
- June 14, 2024
- APEKX
Table of Contents
APEKX BE1029 Wireless Earbuds
Thank you
Thank you for choosing the APEKX BE1029 Wireless Earbuds. For any assistance, please contact our customer support team or email us at [email protected].
Wear Method
-
Make sure is worn for the left or right ear note the marking on the earbud.
-
Make sure to match the right or left side, and align the notch on the ear hook to the earbud.
-
Plume the earplug along the ear canal into the ear.
-
Revolving earbud till the end of the ear hook is inserted behind the ear.
How to pair earbuds with your phone
Step 1
Remove the stickers.
Step 2
Put both earbuds back into the charging case.
Step 3
Take both earbuds out from the charging case.
Step 4
Search and select BE1029 .
Note: When the earbuds cannot connect to your phone or cannot connect back with the phone, please forget the previous Bluetooth connection in the phone and turn off the Bluetooth, and then reboot the wireless earbuds and pair with the BT device again.
Control Function
Auto Power On/Off Earbuds
| Function | Operation | LED Indicators |
|---|---|---|
| Power OFF | Put both earbuds back into the charging case, earbuds will auto | |
| power off | Both earbuds show mint blue light. (means earbuds are charging.) | |
| Power ON | Take both earbuds out from the charging case, earbuds will auto | |
| power on and ready for pairing. | One earbud flashes mint blue light quickly, |
the other earbud flashes mint blue light slowly.
Note: If the charging case is completely discharged , earbuds will not
auto power on while taking them out from the charging case.
Specification
Support type: A2DP /AVRCP/HFP/HSP
Charging case input : 5V 650mA
Frequency range: 20Hz – 20,000Hz
Transmission distance: 10-15m(barrier free)
Earbuds battery : Rechargeable Li-battery 60mAh
Charging case battery : Li-battery 800mAh
Music play time : About 3.5-5 hours
Charge
When the charging case is full of power, it can charge earbuds about 3-4 times.
| Earbuds | Charging Case |
|---|---|
Charging Case
Note: Earbuds will charge automatically when the charging dock is charging.
Signal Transmission
Waterproof for daily life (you cannot dip them into water), you can wear them on when showering, swimming, washing face, exposing in the rain, having a bath, but cannot dive.
Please note this when you are swimming (as illustrate):
-
Above water
-
Under water
Notes for signal transmission distance(as illustrate)
Earbuds Warning!
- Please do not place the product in an environment where the temperature is too high or too low( above 45℃ or below 0℃）.
- Do not dismantle or repair the earbuds under any circumstance, if necessary, please send the product to the seller for repair.
- After the earbuds and the charger are soaked in the water, please dry them with a soft cloth or dry by airing. (If soaking in the sea water, rinse with fresh water and then dry it).Use it after 2 hours.
- The earbuds and the BT devices will be disconnected if the distance between them is more than 10 meters.
- Keep the device and accessories away from children and pets.
- Since the BT signal cannot be transmitted underwater, swimming, diving will cause the signal intermittent or disconnected.
- Do not put the earbuds into the washing machine.
Battery Warning!
- The battery in the product may cause fire disaster and risk of chemical burning if mishandled.
- You can only use specified charger for this product to charge the battery.
- The discard of battery should obey local law, if possible please recycle it . Do not dispose it as household garbage,because it may cause explosion.
- Users are not allowed to take out or replace battery in the product unless there is a stipulation on user manual. It is very hazardous to do this, may cause a damage to product.
Customer Support
