INTEX 267 Pure Spa Headrest Owner’s Manual
- June 14, 2024
- INTEX
Table of Contents
INTEX® OWNER’S MANUAL
SPA HEADREST
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
267 Pure Spa Headrest
WARNING
- Assembly and disassembly by adults only. This product is not a toy.
- This is not a flotation device.
- Remove product before placing a cover over the spa tub.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR DEATH.
SETUP INSTRUCTIONS
- Inflate the headrest using a manual or foot air pump to the desired firmness. Do not over inflate or use high pressure air compressor to inflate. See Fig (1).
- You may also choose to fill the headrest partially with water first from a garden hose or faucet using the included funnel. See Fig (2). Then continue filling up the remaining with air to the desired firmness. See Fig (1).
- Ensure the valve is securely closed and recessed. Place the headrest over the selected spa wall edge area. See Fig (3).
- Adjust the firmness by releasing or adding more air.
MAINTENANCE AND STORAGE INSTRUCTIONS
- For cleaning use only mild soapy solution. Do not use any chemicals.
- Open the valve cap and insert the funnel.
- Drain and/or deflate the headrest completely. Close the valve cap back.
- Clean and air dry thoroughly before folding.
- Lay the headrest flat, fold loosely and avoid sharp bends, corners and creases which can damage the headrest.
- The original packaging can be used for storage. Store in a dry, cool storage location.
- In case of repairs, use only common PVC repair glue and patches.
©2022 Intex Marketing Ltd. – Intex Development Co. Ltd.
®™ Trademarks used in some countries of the world under license from/®™
www.intexcorp.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>