Rollmax CM09 AC Mechanical Tubular Motors with Wired User Manual

Rollmax CM09 AC Mechanical Tubular Motors with Wired

Product Information

Specifications

• Product Name: MOTION CM-09/10 (Q)MC Mechanical Tubular Motor
• Motor Type: AC Mechanical Tubular Motor
• Power Source: 120V/230V Alternating Current (AC)
• Control Options: Wired Control Operation with wired switches
• Motor Features: Heavy duty, Low noise motor

Product Usage Instructions

Warning

Read the instructions carefully before assembling and using the product. Assembly can be completed by nonprofessionals. For indoor use only.

Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings. To avoid strangulation and entanglement, keep cords out of reach of young children.

Cleaning

Follow these general rules when cleaning the outside of the device and its components:

• Use a damp, soft, lint-free cloth.
• Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcohol, or abrasives.

Service & Support

Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

Warranty Service

First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.

Recycle

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Connecting Diagram

Important Notes:

• When the mains cable is permanently connected, a readily accessible disconnect device must be incorporated externally to the motor.
• When there is a pluggable connector installed on the mains cable, the socket-outlet must be installed near the motor and shall be easily accessible.

Wiring Instructions:

1. Do not wire two or more motors to one single pole switch or relay.
2. Do not control one motor from several locations without using a proper controller.
3. Do not connect the brown wire and the black wire at the same time to the power source, this may permanently damage the motor.

Terminal Connections:

• M: Mains Cable
• T: Neutral (1)
• MS 1: Direction 1 (2)
• MS 2: Direction 2 (3)
• C: Ground (4)

For 230V power source:

• Neutral (1): Blue
• Direction 1 (2): Brown
• Direction 2 (3): Black
• Ground (4): Green/Yellow Green

For 120V power source:

• Neutral (1): White
• Direction 1 (2): Red
• Direction 2 (3): Black
• Ground (4): Green/Yellow Green

FAQ

Q: Can I perform repairs on the motor myself?

A: No, it is not recommended to perform repairs yourself. Opening or disassembling the device may result in electric shock and void the limited warranty. Please seek professional assistance for repairs.

Q: What should I do if the product is damaged or not functioning properly?

A: If the product appears to be damaged or does not function properly, please follow the advice in this manual. If the issue persists, visit your local dealer for instructions on how to obtain warranty service.

AC mechanical tubular motors with wired operation

MOTION CM-09/10 (Q)MC MECHANICAL TUBULAR MOTOR

CM-09/10(Q)MC
AC mechanical tubular motors with wired operation

Motor features

Control options

Support

Video
How to install, program and operate rtube.nl/red1032

WARNING

Read the instructions carefully before assembling and using the product. Assembly can be completed by non-professionals. For indoor use only.

• Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of reach of young children.
• Cords may ensnare a child’s neck.
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together. Make sure cords do not twist together and form a loop.

Cleaning

Follow these general rules when cleaning the outside of the device and its components:

• Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcohol, or abrasives.

Service & Support

Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

Warranty Service

First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.

Recycle

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collec-tion systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Connecting diagram

IMPORTANT:
When the mains cable is permanently connected, a readily accessible disconnect device must be incorporated externally to the motor.
When there is a pluggable connecter installed on the mains cable, the socket- outlet must be installed near the motor and shall be easily accessible.

1. Do not wire two or more motors to one single pole switch or relay.
2. Do not control one motor from several locations without using a proper controller.
3. Do not connect the brown wire and the black wire at the same time to the powersource, this may permanently damage the motor.

Find the adjuster screws on your blind

By turning the red or the white adjuster screw to the right (+) or to the left you can respectively enlarge the end position or make it smaller.

Set bottom position

Set top position

Frequently Asked Questions

Disclaimer

© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the utmost care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual. Coulisse B.V. reserves the right to revise the manual and to revise and/or change its content at any time, without obligation to notify any person or entity of such revisions or changes. The most recent version replaces older versions of this manual. The most recent version is available at my.coulisse.com or by contacting your Coulisse contact person. We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.

For the latest information and updated manuals visit rtube.nl/cm- 09mc

Coulisse B.V. Vonderweg 48 7468 DC Enter The Netherlands T +31 547 85 55 55 F +31 547 85 55 50 E info@coulisse.com
coulisse.com

References

• Log in to Coulisse

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>