BEPURE NF UV Water Purifier Owner’s Manual
- June 14, 2024
- BEPURE
Table of Contents
BEPURE NF UV Water Purifier
Congratulations
Dear Customer, You are now a proud owner of BEPURE WATER PURIFIER
We thank you for giving us the opportunity to serve you. We are committed to providing the same level of satisfaction which our valued customers have enjoyed in the past. We are pioneers of water treatment technology in India. For past decades our technological innovations have combated different types of contaminants in water, to make it pure and safe for different applications. At Be Pure every product is crafted with meticulous attention to detail so that it provides ultimate protection against all waterborne diseases and ensures complete protection for your family. This manual will support you in getting the best out of your water purifier. Please go through this booklet to familiarize yourself with its operation, and maintenance and to get the most out of your purifier. In our endeavor to further establish a close relationship with you, we have a helpline for you. Our water care personnel who is a specialist in water treatment shall visit you to attend to your requirements.
With Best Wishes, Be pure Family
PRODUCT INFORMATION
Water flow drawing
Technical parameter
- Voltage : 220V-50Hz
- Filter power: 35W
- Capacity : 100 GPD
- Water source : Tap water or rural water
- Working temperature : 5-45°C
Filter Cartridge Introduction
-
Stage 1: Pre-Filter
Pre-filter removes all the sediments, dust, and other residual particles from water. It has a pore size of 5 microns. The Pre-Filter is important to keep the NF membrane and other fillers protected from large particles and damaging them. -
Stage 2: Sediment Filter
The sediment filter is the same as the Pre-Filter. Sediment Filter removes turbidity, sediments, and sand particles. It has a pore size of 5 microns. A sediment filter acts as a double protection along with Pre-FIiier against large particles -
Stage 3: Activated Carbon Filter
Activated Carbon Filter removes chlorine, smell, odor, and other organics from water. These impurities are removed by the adsorption process. Chlorine removal is very important at this stage as chlorine damages the NF Membrane. -
Stage 4: NF Membrane
NF(Nano Filtration) membrane removes the dissolved impurities, bacteria, viruses, and heavy metals from water thus making the water ultra-pure. -
Stage 5: Post carbon Taste Enhancer
The post-carbon media is impregnated with copper to further enhance the taste and quality of water -
Stage 6: UV Sterilization System
The UV system disinfects the water by sterilization through a UV lamp thus killing any residual bacteria left from the previous filtration process
Installation Procedure
- Fix the SS ball valve to the¼” port of the 3-way connector as shown in the figure.
- Connect the 3-way connector to the raw water supply as shown in the figure. The threaded end of the 3-way connector is fitted in line with the raw water supply. The other end can be connected to a tap or can be plugged off if not required.
- Now connect one end of the white pipe to the SS ball valve and the other end to the upper hex connector on the left-hand side of the purifier labeled as WATER IN with the help of connector nuts.
- Similarly, connect one other end of the white pipe to the lower hex connector labeled as REJECT WATER and leave the other end in the drain.
- Before connecting the power supply, it is important that you perform the following functions:
- Open the SS ball valve (Handle parallel to the ball valve) to start the flow of water into the purifier.
- Wait for 2-3 minutes to ensure that the pre-filters are soaked in water.
- The Carbon Filter needs to be washed for 5 minutes after the purifier is switched on.
- Ensure that all the electrical parts of working properly like the float switch by checking whether the water cuts off when the tank is full.
- Wait till the whole tank is drained off once and then test the TDS and pH of water after installation.
Maintenance
- To ensure that the purifier operates at its optimum level, routine maintenance must be performed. The frequency of maintenance will greatly depend on feed water quality and the level of purifier usage.
- Replace sediment filters as required or every 12 months depending on the raw water quality and consumption
- Replace the NF membrane as required
- Cleaning of the UV tube should be done regularly once a year. ( if the system has UV)
- The activated carbon filter must be replaced once in the year
- If you are not going to use the purifier for a long time(in case you are on a holiday tour or out of home), make sure that you disconnect the power supply, turn off the raw water supply
- Note : Filters and membranes are consumables. Their replacement is time dependent, on the quality of raw water and water consumption, they are not covered under the warranty. The capacity of the NF purifier will reduce with time due to the clogging of pores of membranes
Impurities and Potential Problems
Trouble Shooting
Terms and Conditions
- The warranty period commences from the date of purchase by the first end user. The same is applicable for the first S00hrs or 1 year, whichever is earlier. Warranty period BePure Tech Pvt. Ltd. or its, authorized service provider would be defective in operation due to the faulty material or workmanship (i.e. manufacturing defects) except consumables such as sediment filter, carbon filter, and RO/ UF membrane. However, if the RO/UF membrane filters get clogged within the above-mentioned period, they will be cleaned/ repaired at no extra charge.
- The product has a one-year warranty.
- The original purchaser of the unit can avail services under warranty at the point of sale, by producing the damaged part(s) along with the original invoice.
- This warranty is valid if the unit is not operated under normal municipal water or groundwater up to 2000 TDS subjected to a temperature above 400C.
- The product returned to Bepure or its ASP for warranty examination must be shipped freight prepaid.
- Be pure or its ASP shall not be held liable for claims exceeding the cost of repair of the defects in workmanship.
- This warranty agreement shall not be interpreted to render Be Pure or its ASP liable for injuries or damages of any kind – direct, consequential, or contingent to persons or property.
- Be pure or its ASP shall not be held responsible by the representative or buyer for failure to abide by any of the obligations of this warranty agreement if such failures are the result of circumstances of Forces
- Majeure : such as, but not limited to, floods, earthquakes, transportation strikes, labor disputes with outside suppliers, or any other conditions beyond the control of Bepure or its ASP.
- Bepure or its ASP shall not be held liable for repair or alterations made without prior written approval; for products clogged by suspended matter, precipitates, or biological growth; or for failures resulting from the lack of proper maintenance.
- Be Pure or its ASP cannot and shall not be held liable for any sickness or illness due to the consumption of drinking water from any water purifier supplied by Bepure, since Bepure or its ASP does not have any control over the maintenance and usage of water purifier.
- Bepure reserves the right to alter or improve design and specifications at any time, without any contingent obligations to prospective buyers or owners of the products previously sold.
- Any disagreements and obligations based upon the purchase of Be Pure products and thereby imposed on Be Pure or its ASP shall be governed by and construed according to the laws of India and subject to the jurisdiction of Mumbai Courts only.
- BePure or its ASP assumes no warranty liability in connection with this water purifier other than that specified herein. This warranty is instead of all other warranties, expressed or implied, including warranties of fitness for a particular purpose. Be Pure or its ASP does not authorize any person or representative to assume for them any other obligations on the sale of this water purifier.
- Under no circumstances, the liability of Bepure or its ASP shall exceed the value of the product.
Warranty Details
- Product Information
- Product Name:
- Date of Installation:
- Customer Name:
Water Analysis Report
- RawWaterTDS:
- OutputTDS:
- Raw Water pH:
- Output pH:
Customer Feedback:
Dealer Signature :
Customer Signature (After Successful Installation)
Note : An image of this sheet is to be sent by the installation person to head office to register the warranty
CONTACT US
- Toll-Free Number: 844-844-0117
- Sales : sales@bepuretech.com
- Website : www.bepure.store
Be pure Tech Pvt Ltd