PEMSEM WT-30 Effort Elevator Handheld Lift User Manual
- June 14, 2024
- PEMSEM
Table of Contents
PEMSEM WT-30 Effort Elevator Handheld Lift
What’s This
This handheld arm jack was made to save your effort when lifting heavy objects alone, such as installing and leveling wall tile, door panel, window, washing machine, and more. It can also be used to lift beds, furniture or cabinets for floor cleaning.
About the Parts
A Lock Screw
B Slide Shaft
C Slow Release Trigger
D Fast Release Trigger
E Fixed Handle
F Rising Handle
G House
H Arms
I Base Plate
Lift Mode
Repeatedly grip and release the rising handle to raise the arm to the wanted height.
Release Mode
Repeatedly press and release the “SLOW” trigger to slowly lower the arm and object in a controlled way.
Press and hold the “FAST” trigger to quickly lower the arm to the no-load height.
Please Note: Lowering too fast may cause injury to the object or the operator, when there is a heavy load on the arm, it is not recommended to use the quick release.
Use As A Clamping Tool
- Remove the lock screw.
- Raise the house to the end of the slide shaft.
- Press the FAST trigger and pull out the house from the shaft.
- Fully insert the shaft from the other side of the house while holding the FAST release trigger.
- Attach the lock screw.
Specification
- Lift Range: 5.Sin/140mm
- Lift Capacity: 260Ibs/120kg
Tips for Use
- Please use them in pairs if possible.
- Please insert the arm into gap as much as possible.
- Do not use them overloaded too much (<350Ibs/160kg).
- Please use them on a flat and stable platform.
- When not using smoothly, please lubricate the moving parts, such as springs and spindles, you can use liquid lubricant or grease.