HWWR K38 Wireless Lavalier Microphone User Manual
- June 14, 2024
- HWWR
Table of Contents
**HWWR K38 Wireless Lavalier Microphone User Manual
**
Product Introduction
Thank you for choosing our products. This product is an intelligent wireless microphone, which can provide professional recording output. Plug and play, no app required. For multiple purposes: It can be used in live stream, video vlog shooting, program interview, interview recording, video teaching and other occasions.
The wireless lavalier microphone consists of two parts, the microphone transmitter and the receiver (as shown in the figure below)
-
Microphone Transmitter
-
Microphone Receiver
ID diagram
- Air proof net
- Microphone indicate lamp
- Microphone charging joggle/monitor headset hole
- Microphone clip
- Power ON/OFF key
- Mobile phone joggle
- Receive terminal indicate lamp
- Receive terminal charging joggle
Operating Method
First step: connect one end of receive terminal into mobile phone joggle.
Second step: long time press the power on key of microphone, the indicate lamp flashing red-green lamp, means that power on successfully; the indicate lamp long time lighting green lamp, means connected successfully.
Third step: the receive terminal indicator lamp normally lighting, the mobile phone open the camera, the direct broadcasting video and other APP then can use the microphone receive sound.
Special instruction: the operating method of ⑧ step as the below: no battery in the receive terminal, needn’t charge when direct broadcasting. Directly charge the mobile phone through the joggle of receive terminal under the situation that no enough mobile phone power when direct broadcasting.
Indicator Light Description
Microphone Transmitter
Function/Status | Operation | Light Status |
---|---|---|
Power-on | Press the key for 3 seconds | Red light and green light flash |
alternately
Power-off| Press the key for 3 seconds| The indicator light is off
Power-on but disconnected state| | Red light and green light flash alternately
Power-on and connected state| | Green lights always on
Mute| Click the key| Green light flash
Unmute| Click the key| Green light is always on
Reverb| Double click the key| Green light comes on after flashing red light
Monitoring| Plug in Type C Head| The microphone indicator does not change
Disconnected state| Automatic shutdown after no connection for more than
three minutes| The indicator light is off
Low battery| Under the power onstage| The red light comes on every ten
seconds
Charging status| Type C cable charging| The red light is always on; The red
light is off when fully charged
Receiver
Function/Status | Operation | Light Status |
---|---|---|
Power-on | Power on when inserting the device | Indicator light flash |
Power-off | Power off when unplugging the device | The indicator light is off |
Power-on but disconnected state | Slow flashing of Indicator light | |
Power-on and connected state | Indicator light is always on |
Attention: If one drag two microphone occur that one always flashing and not connect, able to make the connected successfully microphone power off, then plug off the receiver, then power on first and not connect the microphone, then press the switch 8s and not release, till quick flashing, then insert the receiver, connected successfully (power on/off needn’t too big power).
MADE IN CHINA
Documents / Resources
| HWWR
K38 Wireless Lavalier
Microphone
[pdf] User Manual
K38 Wireless Lavalier Microphone, K38, Wireless Lavalier Microphone, Lavalier
Microphone, Microphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>