Csasan SK-L Sport Watch Instruction Manual
- June 14, 2024
- Csasan
Table of Contents
Csasan SK-L Sport Watch Instruction Manual
Appearance Description
Schematic Diagram of Charging
Operate in strict accordance with the following figures:
- Please use the product-specific magnetic charging cable to charge by aligning it with the charging contacts on the back of the watch.
- Do not use a power adapter with a voltage exceeding SV and an output current exceeding l A for charging, as this may cause charging failure and damage to the magnetic charging cable or the device.
- Please activate the watch when it runs out of power before charging: the watch screen will only light up after about 5 minutes of normal charging.
Introduction to Watch Function
- Do Not Disturb On/Off
- Brightness adjustment
- Search function
- Call Bluetooth switch
- Theme mode switch
- Setting
Watch APP Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be connected to a special APP for normal use, such as time display, call alert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following QR code to select the version suitable for your mobile phone system or enter main application markets to download and install Glory Fit.
https://app.help-document.com/gloryfit/download/index.html
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and mobile
phone GPS positioning to obtain the mobile phone positioning
permission. After the connection is successful, it will prompt “To pair
with:Y6” please select pairing.
The watch connection operates as follows:
Note:
- For Android users, the APP should obtain permissions and run backstage, otherwise it will affect the user experience.
- For systems below iPhone iOS 13, after connecting in the APP, you need to connect to the Y6 for the second time in the Bluetooth settings of the mobile phone, and then you can make calls, play multimedia music and other functions.
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use, and the measurement data is for reference only.
- It is not recommended to wear in hot water baths and long-time swimming.
- Please charge with the matching charging cable.
FAQ
l. Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the time of the phone.
A. Make sure your phone's Bluetooth and phone GPS positioning are on before using it for the first time. B. Users need to open the APP to obtain positioning permission (Phone Settings - Applications). C. If the watch has already been paired with a Bluetooth connection in the phone, please cancel the pairing first and then search for the connection in the APP. D. If the watch is not used for a long time, the Bluetooth will go into a dormant state. Please turn off the Bluetooth of the watch and the phone, reopen it after about 1 minute, and try to search the connection in the APP again. E. The watch must be connected to the APP, otherwise, the steps, sleep, time, and other function will not work properly.
2. There is no alert function on the watch.
3. The reminder switch is turned on, but there is no reminder on the watch, or the reminder is sporadic.
If the phone turns on the message notification and the corresponding notification permission according to the above tips, the Bluetooth is kept on, and the APP and the watch are kept connected, maybe the system authorized APP alert function is not working, and the user needs to re-check the message push function.
4. Android's phone Bluetooth often disconnects or has no message alert after a period of connection.
Android will from time to time clean up the phone's backstage applications or applications that consume more power for smooth system operation. If the APP is not set to allow backstage running, it will be easily cleaned by the system and the Bluetooth will drop out. Different Android phones have different methods for APP backstage running settings. As in the Huawei nova 8 SE: Settings - Battery - Power Consumption Ranking - APP -Application Launch Management- Manually manage to turn on backstage running.
Activation & Warranty
Support for 24 months to replace damaged, defective, upgraded or missing items
(no need to return the original). Please activate via email
below within 15 days .
“amazon.seller9966@gmail.com“