Csasan i33 Single Bluetooth Earphones Instruction Manual
- June 14, 2024
- Csasan
Table of Contents
Csasan i33 Single Bluetooth Earphones
Connect
Reset
If earbuds has any connection or function problems, please reset the earbuds
- Delete the BT pairing information on the phone.
- Take the earbuds into the charging case to charge.
- Take out the earbuds and wait for20 seconds. (If the above operation does not work, please try again)
Operation
![Csasan -]i33 -Single -Bluetooth -Earphones -fig (2)](https://manuals.plus /wp-content/uploads/2023/11/Csasan-i33-Single-Bluetooth-Earphones-fig-2.png)
![Csasan -]i33 -Single -Bluetooth -Earphones -fig (3)](https://manuals.plus /wp-content/uploads/2023/11/Csasan-i33-Single-Bluetooth-Earphones-fig-3.png)
Problem handling
-
Can be connected but there is no sound:
Click the headset to increase the volume. -
Headset cannot be charge:
Clean the charging contact of the headset and the charging case. -
Headset cannot be connected:
Reset the headset.
Activation & Warranty
Permanent replacement of damaged, defective item or missing components. Please
activate via email below within 15 days.
aslnskhs@gmail.com
- Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures.
Safety Instructions
- Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
- Avoid liquid immersion into the product.
- Do not disassemble the product.
- Do not use concentrated chemical products or detergents to clean the product.
- Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
- Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.