The Knot Dr BC125DBC All One Dryer Brush Set Installation Guide

The Knot Dr BC125DBC All One Dryer Brush Set Installation Guide

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER – Any appliance is electrically DANGER – live even when the switch is off. To reduce the risk of death or injury by electric shock:

1. Always unplug appliance immediately after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other liquids.
5. If an appliance falls into water, unplug it Do not reach into the water.

WARNING – burns, electrocution, fire, or injury to persons:

1. This appliance should never be left 1. unattended when plugged in.

2. This appliance should not be used by, on, or near children or individuals with certain disabilities.

3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

4. Never operate this appliance if it has a. damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.

5. Keep the cord away from heated surfaces.
   Do not pull, twist, or wrap line cord around appliance, even during storage.

6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.

7. Never use while sleeping.

8. Never drop or insert any object into any opening or hose.

9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

10. Do not use an extension cord to operate hot air styler.

11. Do not direct hot air toward eyes or other heat-sensitive areas.

12. Attachments may be hot during use. Allow them to cool before handling.

13. Do not place appliance on any surface while it is operating.

14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.

15. Do not use with a voltage converter.

16. This appliance is not a toy. Keep away from children.

SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS

This appliance is intended for household use only. Use on Alternating Current (60 hertz) only.
Standard hot air stylers are designed to operate at 110 to 125 volts AC.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
NOTE: Do not use this styling appliance on hair extensions.

AUTO-MONITORING ALCI SAFETY PLUG WITH LED INDICATOR
IF THE ALCI LED INDICATOR LIGHT IS FLASHING CONTINUOUSLY, THIS INDICATES THAT THE ALCI IS NOT FUNCTIONING PROPERLY. STOP USING AND RETURN APPLIANCE TO AN AUTHORIZED SERVICE CENTER.
CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE THE APPLIANCE.

LED Indicator
(If LED light is fl ashing, stop using appliance.)

This appliance is equipped with an auto monitoring function Appliance Leakage Circuit Interrupter (ALCI), a safety feature that provides protection against electrical shock under abnormal conditions, such as immersion in water. To ensure that the ALCI is functioning properly, perform the following test.

1. Plug in the appliance with the power off and press the test button on the ALCI (see diagram).

2. There will be an audible click, the reset button will pop out and the LED indicator will be off.
   The appliance will not turn on. This indicates the ALCI is functioning properly.

3. To reset the ALCI, the unit should be unplugged. Then press the reset button and plug the unit back into the outlet. The appliance should work normally when switched on.

4. Be sure to repeat this test each time you use the unit to confi rm that the ALCI is operating properly.

5. If the appliance shuts off and the reset button pops up during use, this could indicate a malfunction. Remove the plug from the outlet and allow the appliance to cool. Press the reset button and plug it into the outlet. The appliance should function normally. If not, send it to an authorized service center for evaluation.

6. IF THE UNIT IS IMMERSED IN WATER. DO NOT ATTEMPT TO RESET AND USE THE APPLIANCE. IT SHOULD BE SENT TO AN AUTHORIZED SERVICE CENTER IMMEDIATELY.

TOURMALINE CERAMIC TECHNOLOGY

The hot air styler has tourmaline ceramic heat, eliminating damaging hotspots for beautiful, frizz-free shine.

GETTING STARTED

After shampooing your hair, towel-dry and untangle it carefully with a large- toothed comb.
Always start untangling your wet hair at the tips, then gradually work your way up. Gentle untangling prevents split ends from forming.
You may now finish drying and styling your hair using your hot air styler. Plug styler into outlet. Slide switch to turn appliance ON and OFF.

FEATURES

• 700W
• High shine
• 3 heat settings
• Professional power cord

OVAL BRUSH
120 Flexalite™ bristles – just the right number, spaced just the right way. Epoxy tips gently massage scalp for painless detangling.

CONVENIENT AND COMPACT

This lightweight mini oval brush is the perfect size for storage and travel. Create salon blowouts at home or on the go!

GET TO KNOW YOUR STYLER

HEAT/SPEED SETTINGS

Cool Setting: This position combines ideal airflow and temperature setting for shaping fine, damaged or treated hair.

Low Setting: normal hair. Combines ideal airflow with High Setting: higher temperature for thick hair.

TO STYLE HAIR

1.  After detangling hair, section damp hair into 4 to 8 equal parts, depending on hair type.
2. Select heat setting based on hair type and desired effect.
3. Place the appliance into the hair, close to the roots and brush through the section until hair is dry.
4. Add lift and volume by holding brush at roots for a few seconds before gliding down.
5. Finish look with favorite styling spray.

SETTING

|

HAIR TYPE

---|---

COOL

| Fragile, Fine/Thin Hair

LOW

|

Medium/Normal Hair

HIGH|

Wavy/Curly/Textured Thick Hair

IMPORTANT

Never immerse this product in water or any other liquids.

*IF YOU MUST USE YOUR HOT AIR STYLER IN THE BATHROOM, INSTALL A GFCI NOW!**
Your local electrician can help you decide which type is best for you – a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCIs in the bathrooms, garages, and outdoor outlets of all new homes.

WHY DO YOU NEED A GFCI? water don’t mix. If your hot air styler falls in water while it’s plugged in, the electric shock even if the can kill you…
A regular switch is off. fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.

A GFCI can save your life! Compared to that, the price is small! Don’t wait… install one now!

• GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity fl ow.

CLEANING & MAINTENANCE

• Unplug the appliance and let cool completely before cleaning it.
• Use a damp cloth to clean carefully. Make sure the appliance is completely dry before using again.
• The rear filter should be cleaned on a regular basis using a soft brush to help prevent buildup and overheating. This will also prolong the motor life.

USER MAINTENANCE

Your hot air styler is virtually maintenance free. No lubrication is needed. For proper operating performance, the hot air styler must be kept clean. When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the hot air styler should be wiped clean with a cloth only.

Blocked or clogged air intake vents will cause the hot air styler to overheat. overheating occurs, an automatic safety device will shut the hot air styler or the heat off to prevent damage or personal injury. If the unit or the heat turns off, unplug the cord and allow the hot air styler to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the hot air styler. Damage will occur at the high fl ex point of entry into the hot air styler, causing it to rupture and short circuit. Stop Inspect the cord frequently for damage. use immediately if damage is visible or unit stops or operates intermittently.

If the cord or hot air styler is damaged or does not operate properly, return it for repair to an authorized Conair service representative only. No repairs should be attempted by the consumer.

STORAGE – IMPORTANT

When not in use, your hot air styler should be disconnected, allowed to cool and stored in a safe, dry location, out of reach of children. Do not wrap line cord around hot air styler. Allow the cord to hang or lie loose and straight at the point of entry into the hot air styler.

LIMITED THREE-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 36 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 3 years from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF
Some THIS WRITTEN, LIMITED WARRANTY. states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

BEAUTY TIPS

To achieve the looks you love and for more ® great Infi nitiPRO by Conair products, visit : www.conair.com

Please register this product at register.conair.com
Service Center
Conair LLC
Service Department
7475 N. Glen Harbor Blvd. Glendale, AZ 85307

For information on any Conair or InfinitiPRO by Conair product, call 1-800-3-CONAIR or visit us on the web at www.conair.com

©2022 Conair LLC
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
22PA083258

This message about…

G : ROUND

F : AULT

C : IRCUIT

I : NTERRUPTERS
… can save a life!

References

• Welcome | Conair
• Conair LLC Consumer Products for Haircare, Beauty, Wellness, Home and Travel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>