Air Direct IC-AD Wireless Receiver Installation Guide
- June 14, 2024
- Air Direct
Table of Contents
Thank you for purchasing the product.
This manual contains information on the stable use of the product.
Product Information
Part No: AC0213
Size: Approx. 79×24.5×12.5mm
Weight: Approx. 16.2 g
Operating Voltage: 5V 0.5A (USB power)
Quality Guaranteed
This product was produced under strict quality control. In a normal operating environment, no problems occur within one year of the purchase date of the product, and product repairs are provided free of charge.
How to Install
- Connect the receiver to the USB port on your PC
2)
After approximately 5 seconds, the receiver will display a logo and the
receiver’s default number “001”
3) To
change to a number that does not overlap with other receivers, press the and
buttons on the receiver to change the number. (Press and hold the and buttons
to change quickly.) 
Please refer to the intraoral camera manual for instructions on how to connect
the intraoral camera to the receiver
The intraoral camera manual can be downloaded from the www.gooddrs.com website
by clicking on the product
a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
b. Rule Part 15.21: The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
GDUM-IC-AD-Direct V_Rev.2