INTEX 68672 Classic Downy Single Mattres Con Instruction Manual
- June 14, 2024
- INTEX
Table of Contents
INTEX 68672 Classic Downy Single Mattres Con
Product Description
Inflate
-
1a. Separate valve cap from valve housing and press valve housing firmly into exhaust hole.
1b. If valve housing already inserted inside exhaust hole, pull valve cap to open. -
Insert pump hose or nozzle.
CAUTION: To prevent bursting, do not use a high pressure pump such as an air compressor. -
Replace cap securely.
Deflate
-
Pull out valve cap.
-
Pull inflation valve housing to release air.
-
Replace inflation valve housing and cap securely
©2022 Intex Marketing Ltd. – Intex Development Co. Ltd. – Intex Recreation
Corp.
®™ Trademarks used in some countries of the world under license from/®™
46, 4706 PB Roosendaal – The Netherlands
Limited Warranty
90 DAYS LIMITED WARRANTY FOR 2-IN-1 VALVE AIR BEDS
Your Intex air bed has been manufactured using the highest quality materials
and workmanship. All Intex products have been inspected and found free of
defects prior to leaving the factory. This Limited Warranty applies to the
Intex air bed only.
This limited warranty is in addition to, and not a substitute for, your legal
rights and remedies. To the extent that this warranty is inconsistent with any
of your legal rights, they take priority. For example, consumer laws across
the European Union provide statutory warranty rights in addition to the
coverage you receive from this limited warranty: for information on EU-wide
consumer laws, please visit the European Consumer Center website at
http://ec.europa.eu/consumers/ecc/contact_en/htm.
The provisions of this Limited Warranty apply only to the original purchaser
and are not transferable. This Limited Warranty is valid for a period of 90
days from the date of the initial retail purchase. Keep your original sales
receipt with this document, as proof of purchase will be required and must
accompany warranty claims or the Limited Warranty will be invalid.
If you find a manufacturing defect in the Intex Air bed during the warranty
period, please contact the appropriate Intex Service Center listed in this
manual. If the item is returned as directed by the Intex Service Center, the
Service Center will inspect the item and determine the validity of the claim.
If the item is covered by the provisions of the warranty, the item will be
repaired or replaced, with the same or comparable item (at Intex’s choice) at
no charge to you.
Other than this warranty, and other legal rights in your country, no further
warranties are implied. To the extent possibly in your country, in no event
shall Intex be liable to you or any third party for direct or consequential
damages arising out of the use of your Intex Air bed, or Intex or its agents’
and employees’ actions (including the manufacture of the product). If your
country does not allow the exclusion or limitation of incidental or
consequential damages, this limitation or exclusion does not apply to you.
You should note that this limited warranty does not apply in the following
circumstances:
- If the Intex Air bed is subject to negligence, abnormal use or application, accident, improper operation, improper voltage or current contrary to operating instructions, improper maintenance or storage;
- If the Intex Air bed is subject to damage by circumstances beyond Intex’s control, including but not limited to, punctures, tears, abrasions, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or other external environmental forces;
- To parts and components not sold by Intex; and/or
- To unauthorized alterations, repairs or disassembly to the Intex Air bed by anyone other than Intex Service Center personnel.
Read the owner’s manual carefully and follow all instructions regarding proper operation and maintenance of your Intex air bed. Always inspect your product prior to use. This limited warranty will be void if use instructions are not followed.
NEW ZEALAND
HAKA NEW ZEALAND LIMITED
UNIT 4, 11 ORBIT DRIVE, ROSEDALE,
AUCKLAND 0632, NEW ZEALAND
: 649-4159213 / 0800 634434
: 649-4159212
: johnny@hakanz.co.nz
: www.hakanewzealand.com
PAKISTAN
TOY CENTRE
1ST FLOOR, MADNI CENTRE, SHAH ALAM
MARKET, LAHORE, PAKISTAN
: +92 42 37656133
: +92 42 7631933
: 92 42 37376004
: toycentreht@hotmail.com
UNITED STATES/CANADA
INTEX RECREATION CORP.
1665 HUGHES WAY,
LONG BEACH, CA 90810
: 1-310-549-8235
: 310-549-2900
: www.intexcorp.com
UK
JOHN ADAMS LEISURE LTD
HERCULES HOUSE, PIERSON ROAD,
ENTERPRISE CAMPUS, ALCONBURY
WEALD, HUNTINGDON, PE28 4YA
: 0333 400 4548
: intex@johnadams.co.uk
: www.intexwetset.co.uk
References
- Steinbach Helpdesk
- intexserviciodr.com – Intex Servicio DR
- CENTRO DE SERVICIO INTEX – PoolMarket PR
- CENTRO DE SERVICIO INTEX – PoolMarket PR
- First Group International | First Group International
- hakanewzealand.com
- Home - Ideal Sources
- Intex | Diversión en grande, disfruta del agua con Intex Chile.
- INTEX Schweiz | Offizieller INTEX Shop
- ××™× ×˜×§×¡ ישר×ל | INTEX | בריכות שחייה, מש×בות, פילטר
- intex.eu
- Intex : premier fabricant au monde de piscines hors sol et d'articles gonflables
- INTEX ARGENTINA
- INTEX: The leader in Above Ground Swimming Pools, Air Mattresses and Inflatable Spas
- Intexcorp.cz - firemní rozcestník (B2C/B2B)
- intex
- Intex Development: Oficjalny przedstawiciel - producent materaców
- intexegypt.com
- INTEX FAQ | Kundenservice & Support
- Richiesta Garanzia Intex Italia | Gestisci la tua pratica | Intex Garanzie
- Intex Italia | Official Website
- Ricambi Originali Intex | Compra Online | Intex Ricambi
- Intex Store South Africa – Intex-sa
- Intex
- intexservicenordic.com
- Intex Wetset | Above Ground Pools & Inflateables
- samacotoys.com.sa
- Home | Toy Market Trading
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>