APALUS Magnetic Fly Screen For The Balcony Door Instruction Manual
- June 14, 2024
- Apalus
Table of Contents
APALUS Magnetic Fly Screen For The Balcony Door
MINUTES INSTALLATION
-
CLEAN DOOR FRAME
Please clean your door frame surface before sticking Velcro on it. -
STICK VELCRO ON YOUR DOOR FRAME
Measure length of your door top, left and right side frame. Using scissors cut Velcro for the length of the top, right and left door frame. Carefully peel and firmly press starting at the top of door frame place Velcro on top of door frame first, then left and right side frame. -
INSTALL FLY MESH SCREEN
Start from top center of door frame, firmly press Velcro along to left and right side. Push pins are provided when extra fasteners are needed for wood surface. Push pins are for wood surface only. -
TIE UP YOUR SCREEN TO CLEAR THE DOORWAY
Remove part of the Velcro on the screen door in the middle as shown on the image. Insert and stick the holding tie between the hook tape and loop tape. Then firmly press screen door Velcro back.
Hold one panel of fly mesh screen to one side, and use the holding tie to tie it. Then repeat to tie another panel to clear the doorway.
Note:
- For uneven wood surfaces, please use supplied nails to affix Velcro strip.
- Before sticking Velcro strip to door frame, please ensure the affixed length matches the screen size.
- If there is a gap after fixing screen, remove the screen, straighten it and fix it again.
Copyright by APALUS. Reproduction is prohibited!