Hemisol 2023 NEW 5G Wireless Wifi Extender Repeater User Manual
- June 14, 2024
- Hemisol
Table of Contents
Hemisol 2023 NEW 5G Wireless Wifi Extender Repeater
Product Information
- The WiFi Range Extender is a device that extends the range and coverage of your existing Wi-Fi network.
- It helps eliminate dead zones and provides a stronger and more reliable wireless connection.
The extender has various indicators to provide status information:
- Power Indicator: Indicates the power status of the extender.
- Internet Indicator: Indicates the internet connectivity status.
- LAN Indicator: Indicates the connection status of the LAN ports.
- Signal Indicator: Indicates the signal strength of the host Wi-Fi network.
The extender also features a Reset Button and a WPS Button for easy setup and troubleshooting.
Product Usage Instructions
Quick Setup Guide:
- Plug the Extender into a power outlet near your existing Wi-Fi Router.
- Open the Wi-Fi settings on your mobile phone or computer and Search for the “Repeater-xx” network in your wireless network list.
- If the settings page does not pop up automatically, launch your web browser and enter the IP address: 192.168.11.1 in the address bar.
- Click on “LOGIN”.
- Choose “Repeater Mode” and wait for 10 seconds while the system scans all networks.
- Select the name of the existing Wi-Fi network you want to extend.
- Type your Wi-Fi password into the Password box and click the “Next” button.
- Click the “Finish” button. The extender will reboot automatically.
- Place the Extender halfway between your Wi-Fi Router and the area with poor signal coverage.
AP Mode Setting
- Choose “AP Mode” and click the “Next” button.
- Type your network SSID and Wi-Fi password. Note: the password should be more than 8 digits.
- Click the “Finish” button. The extender will reboot automatically.
- Connect the network cable after the configuration is finished.
Frequently Asked Questions (FAQ)
Q: How do I reset the Extender?
- A: To reset the extender, use the reset pin to press the RESET button for 10-15 seconds to restore factory settings.
- The WiFi SSID of the Wi-Fi extender will be “Repeater-xx” after restoring successfully.
- Then set up again from the beginning.
Q: Does the Extender work with 5G?
- A: No, the Extender only operates in the 2.4GHz band.
Q: I can’t see the Wi-Fi Extender in my network list.
- A: Please press the RESET button for 15 seconds, and wait 30 seconds.
- Then check the network list one more time.
Q: I tried to open your IP address, but it says no internet or page error.
- A : Please open your Wi-Fi settings and check your network.
- You need to be connected to the Extender network, not to the main router or mobile internet network!
INTRODUCTION
QUICK SETUP GUIDE
Step 1
- Plug the Extender into a power outlet near your existing Wi-Fi Router.
Step 2
- Open the Wi-Fi settings on your mobile phone or computer.
- Search and connect to the “Repeater-xx” Network in your wireless network list.
- Note: If the settings page does not pop up automatically, launch your web browser and enter the IP address: 192.168.11.1 in the address bar.
Step 3
- Click “LOGIN”
Step 4
- Option 1: Choose Repeater Mode and wait 10 seconds.
- The system scans all networks.
Step 5
- Click on the name of the existing Wi-Fi Network you want to extend, e.g., X
Step 6
- Type your Wi-Fi password into the Password box and click the Next button
Step 7
- Click the Finish button. Once you complete the steps, your Extender reboots automatically. Place the Extender halfway between your Wi-Fi Router and the area with pool signal coverage.
- The Extender’s default name is your [Wi-Fi name -ext], the password remains the same as the existing WiFi Router’s Password
AP MODE SETTING
Step 1
- Choose AP Mode and click Next button
Step 2
- Type your network SSID and Wi-Fi password.
- Note: the password should be more than 8 digits.
Step 3
- Click the Finish button. Once you complete the steps, your Extender reboots automatically.
- Connecting the network cable after the configuration is finished.
FQA
How do I reset the Extender?
- To reset the extender, use the reset pin to press the RESET button for 10-15 seconds to restore factory settings. The WiFi SSID of the Wi-Fi extender will be “Repeater-xx” after restoring successfully.
- Then set up again from the beginning.
Does the Extender work with 5G?
- No, the Extender only operates in the 2.4GHz band.
- I can’t see the Wi-Fi Extender in my network list.
- Please press the RESET button for 15 seconds, and wait 30 seconds.
- Then check the network list one more time.
- I tried to open your IP address, but it says no internet or page error.
- Please open your Wi-Fi settings and check your network. You need to be connected to the Extender network, not to the main router or mobile internet network!
- You will have a “no internet” connection near the network “Repeater-X”, but it’s correct! Until you finish setup, the network will be without internet.
- NOTE: You can’t connect to the IP or site when you have an internet connection because this is not an internet page, but the setting page of your Extender.
When I’m connected to Wi-Fi Extender, it says no internet.
- This issue you have is because of the wrong password. Even if you are sure about the correct password, please reset your device and set it up again.
NOTE: Check your password a few times! It’s CASE-SENSITIVE! Many phones use a first capital letter as a default, so please check if all letters are the same as your main router password!
After I install the Extender, which area will be the best to have it?
- The Extender should be halfway between the Wi-Fi Router and the area with poor signal coverage.
- The Extender must receive a good signal from the Wi-Fi Router.
Need help? We’re here for you!
- If you have any issues with the device, please contact us for assistance before opening
- 24-hour after-sales email:Wifinew300@gmail.com
- Wifinew300@gmail.com
- Web.: www.meestory.com.cn.
- Scan to view the full video setup tutorial
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>